Hierarchical levels of organization of the Brazil nut mesocarp

Aiming to understand Nature´s strategies that inspire new composite materials, the hierarchical levels of organization of the Brazil nut (Bertholletia excelsa) mesocarp were investigated. Optical microscopy, scanning electron microscopy (SEM), microtomography (MicroCT) and small-angle X-ray scattering (SAXS) were used to deeply describe the cellular and fibrillary levels of organization. The mesocarp is the middle layer of the fruit which has developed several strategies to avoid its opening and protect its seed. Fibers have a different orientation in the three layers of the mesocarp, what reduces the anisotropy of the structure. Sclereids cells with thick cell walls fill the spaces between the fibers resembling a foam-filled structural composite. The mesocarp has several tubular channels and fractured surfaces which may work as sites for crack trapping and increase toughness. The thick and lignified cell wall of sclereids and fibers and the weak interface between cells can promote a longer and tortuous intercellular crack path. Additionally, fibers with high strength and stiffness due to microfibrils oriented along the main cell axis (µ = 0° to 17°) were identified in the innermost layer of the mesocarp. Such an understanding of each hierarchical level can inspire the development of new cellular composites with improved mechanical behaviorDFG, 414044773, Open Access Publizieren 2019 - 2020 / Technische Universität Berli

Influence of the clay content and the polysulfone molar mass on nanocomposite membrane properties

AbstractPolysulfone/MMT nanocomposite membranes were prepared by a congruence of the wet-phase inversion and the solution dispersion techniques. Different clay contents and two kinds of polysulfone were used in order to investigate the changes in the nanocomposite structure as well as in the thermal and mechanical properties. The increase in the basal spacing with the clay content increase was revealed by SAXRD. TEM images depicted the presence of hybrid morphology and SEM images showed that the clay particles were trapped inside the cross-section pores. By increasing the clay content and polysulfone molar mass, the onset temperature of decomposition was increased and the mass loss was decreased. From DTA studies, it was observed that PSf P-1700 low clay content membranes had higher values of enthalpies and the enthalpy values of PSf P-3500 membranes did not present a regular behavior. Also in the tensile tests, the increase of the clay content up to 4.0mass% promoted the increase of elongation at break and tensile strength

Mechanical properties of polypropylene/calcium carbonate nanocomposites

The aim of this work was to study the influence of calcium carbonate nanoparticles in both tensile and impact mechanical properties of a polypropylene homopolymer. Four compositions of PP/CaCO3 nanocomposites were prepared in a co-rotational twin screw extruder machine with calcium carbonate content of 3, 5, 7 and 10 wt. (%) The tests included SEM analyzes together with EDS analyzer and FTIR spectroscopy for calcium carbonate, tensile and impact tests for PP and the nanocomposites. The results showed an increase in PP elastic modulus and a little increase in yield stress. Brittle-to-ductile transition temperature was reduced and the impact resistance increased with the addition of nanoparticles. From the stress-strain curves we determined the occurrence of debonding process before yielding leading to stress softening. Debonding stress was determined from stress-strain curves corresponding to stress in 1% strain. We concluded that the tensile properties depend on the surface contact area of nanoparticles and on their dispersion. Finally we believe that the toughening was due to the formation of diffuse shear because of debonding process

Influence of calcium carbonate nanoparticles on the crystallization of olypropylene

The aim of this work was to study the influence of calcium carbonate nanoparticles in crystallization process of polypropylene. Four compositions of PP/CaCO3 nanocomposites were prepared in a co-rotational twin screw extruder machine with calcium carbonate content of 3, 5, 7 and 10 wt. (%). The tests included SEM analyzes for calcium carbonate, differential scanning calorimetry (DSC) and wide angle X-ray diffraction (WAXD) for the nanocomposites. The results showed an increase in PP crystallization temperature and crystallinity degree, and a reduction in spherullites size. The formation of PP β phase was confirmed by DSC and WAXD results. Finally from DSC analyses under isothermal conditions it was confirmed that calcium carbonate nanoparticles have a nucleation effect in polypropylene crystallization process by reducing the half crystallization time and increasing the kinetic constant (k)

Comportamento mecânico e termo-mecânico de blendas poliméricas PBT/ABS Mechanical and thermo-mechanical behavior of PBT/ABS polymer blends

RESUMO: Blendas de poli(tereftalato de butileno) (PBT) e copolímero ABS foram estudadas usando-se três tipos diferentes de ABS. As blendas foram caracterizadas mecanicamente através de ensaios de tração e de impacto, e termo-mecanicamente através da determinação da temperatura de deflexão térmica (HDT). Uma influência mais pronunciada foi observada para a variação da composição química do ABS, em relação às diferentes composições de fase, onde blendas com ABS de maior proporção de acrilonitrila mostraram melhor comportamento. Foi observado que baixos níveis de ABS nas blendas proporcionam principalmente um aumento pronunciado da HDT e sem variação da resistência ao impacto, em relação ao PBT puro. Por outro lado, baixos níveis de PBT nas blendas não alteram as propriedades em relação ao ABS puro, com exceção da resistência ao impacto, que mostrou uma redução significativa.<br>ABSTRACT: Polymer blends of poly(butylene terephthalate), PBT, and three grades of Acrylonitrile-Butadiene-Styrene copolymer, ABS, were studied. Polymer blends were characterized by impact resistance, tensile strength and heat deflection temperature tests. It was observed a stronger influence of the chemical composition of the ABS resin on the blends properties, mainly for the blends with higher ABS content which show better properties, than the phase composition of the ABS. It was observed that low levels of ABS in the blends promote mainly a high increase in HDT at the same level of impact resistance, as compared to neat PBT. On the other hand, low levels of PBT in the blend basically keep all the properties at the same level except the impact resistance which shows a significant decrease