THE SHALLOW MAGMA CHAMBER OF STROMBOLI

AbstractIn this work, we integrate artificial and natural seismic sources data to obtain high‐resolution images of the shallow inner structure of Stromboli Volcano. Overall, we used a total of 21,953 P readings from an active seismic experiment and an additional 2731 P and 992 S readings deriving from 269 local events. The well‐defined Vp, Vs, and Vp/Vs tomograms have highlighted the following: (i) the region where magma cumulates at shallow depths (2–4 km below sea level (bsl)), forming an elongated NE‐SW high‐velocity body (Vp ≥ 6.0 km/s and Vs ≥ 3.5 km/s), with a very fast velocity core (6.5 ≤ Vp < 7.0 km/s) of ~2 km3; (ii) the presence of some near‐vertical pipe‐like structures, characterized by relatively high P velocities values, mainly linked to past activity (e.g., Strombolicchio); and (iii) a near‐vertical pipe‐like volume with high Vp/Vs (1.78 ÷ 1.85), located beneath to the craters (down to ~1.0 km bsl), overlying a deeper region (1.0 to 3.0 km bsl) with low Vp/Vs (1.64 ÷ 1.69), interpreted as the actual and preferential pathway of magma toward the surface. Our results demonstrate the importance of combining passive and active seismic data to improve, in a tomographic inversion, the resolution of the volcanic structures and to discover where magma may be stored

Structural health monitoring and earthquake early warning: preliminary studies for application in eastern Sicily

In this work, the reduction of seismic hazard in eastern Sicily is addressed by both studying the fundamental resonant frequency of strategic buildings through low cost geophysical investigation techniques, and exploring a practical approach to earthquake early warning EEW) system. The fundamental period and the corresponding amplification of some selected strategic buildings has been estimated using ambient vibration and earthquake data. We analyzed the basic dynamic parameters of buildings chosen as target, by using continuous vibration measurements at different floors. The dynamic behavior of structures was evaluated considering both small strains induced by ambient vibrations and larger excitation levels due to the earthquakes occurrence. A practical approach to earthquake early warning in the investigated area was dealt with by using empirical relationships between parameters measured on the initial portion of seismic recordings and related to the earthquake magnitude and peak ground motion. In particular, we performed the first preliminary tests by using empirical relationships calibrated for the considered area and taking into account the geometry of the existing permanent seismic network deployed in the eastern Sicily. The estimated relationships have been used to provide onsite warning around a given seismic station and evaluate the potential damaging effects. The joint of EEW system and geophysical investigation shown in this work may be deemed a useful guide for the future implementation of the in real time seismic monitoring in the region.This work has been supported by the following project: “Attività di sviluppo sperimentale finalizzata alla riduzione del rischio sismico nella Sicilia Orientale” inside the PO-FESR 2007-2013 Sicilia; MED-SUV funded from the European Union Seventh Framework Programme (FP7) under Grant agreement n°308665. This work is sponsored by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement n° 798480. We are thankful to Salvatore Rapisarda and Danilo Contrafatto to support us in the field work

Seismic amplification effects and soil, to, structure interaction study nearby a fault zone: the Tremestieri fault and Madre Teresa di Calcutta School (Catania)

Results of passive seismic surveys, in terms of both amplification and polarization effects in a section of the Tremestieri Etneo Fault (Sicily Eastern center - Catania) are discussed. For the purpose, velocimetric and accelerometric records of seismic ambient noise were analyzed. The polarization analysis of particle motion was performed and azimuthally dependent resonant frequencies were estimated. Ambient noise data were also used to assess the dynamic properties of a reinforced concrete building, located on the fault zone. The fundamental modes have been estimated through ambient noise recordings acquired by three-directional accelerometers, installed at the highest accessible floor and outside the building. The study revealed a clear oriented seismic amplification in the fault zone. This effect was observed in intensely jointed rock masses, located inside the fault area, as the result of specific geometries and significant directional impedance contrasts characterizing the area under study. The analyses show that the direction of the largest resonance motions has transversal relationship with the dominant fracture orientation. The directional amplification is inferred to be produced by stiffness anisotropy of the fault damage zone, with larger seismic motions high angle to the fractures. The results obtained are in complete agreement with those obtained by a previous study which analyzed the fault section located to the north-west.Finally, comparing the dynamic properties of the school building and the vibrational characteristics of the soil in the direction of maximum amplification, no clear resonant effect in the soil-structure interaction has been observed.This paper has been funded by the following research projects: “Attività di sviluppo sperimentale finalizzata alla riduzione del rischio sismico nella Sicilia Orientale” inside the PO-FESR 2007-2013 Sicilia; MED-SUV funded from the European Union Seventh Framework Programme (FP7) under Grant agreement n°308665. This work is sponsored by European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement n° 798480

Source geometry from exceptionally high resolution long period event observations at Mt Etna during the 2008 eruption

During the second half of June, 2008, 50 broadband seismic stations were deployed on Mt Etna volcano in close proximity to the summit, allowing us to observe seismic activity with exceptionally high resolution. 129 long period events (LP) with dominant frequencies ranging between 0.3 and 1.2 Hz, were extracted from this dataset. These events form two families of similar waveforms with different temporal distributions. Event locations are performed by cross-correlating signals for all pairs of stations in a two-step scheme. In the first step, the absolute location of the centre of the clusters was found. In the second step, all events are located using this position. The hypocentres are found at shallow depths (20 to 700 m deep) below the summit craters. The very high location resolution allows us to detect the temporal migration of the events along a dike-like structure and 2 pipe shaped bodies, yielding an unprecedented view of some elements of the shallow plumbing system at Mount Etna. These events do not seem to be a direct indicator of the ongoing lava flow or magma upwelling

Statistical analysis of the volcano seismicity during the 2007 crisis of Stromboli, Italy: a 3-day oscillatory signal as onset of the activity

We analyze the volcano seismicity recorded during the 2007 eruption of Stromboli. Data-set is composed of the continuous recordings of a three-component broad-band seismometer and of a strainmeter. Starting from the characterization of the standard activity as a stationary phase of equilibrium, we investigate the non-equilibrium phase of the effusive process. A statistical analysis of the explosions reveals that the occurrence is always driven by a Poisson process as for the standard activity, even approaching the effusion phase, with the only difference in shortening the inter-times just during the effusion. A slightly different process can be advocated for the swarms of the explosions, because a maximum in the distribution of inter-times can be evidenced. Regarding the amplitudes of the explosion-quakes, they have a log-normal distribution until the effusion onset as in the standard Strombolian activity. The actual departure from that stationarity seems to be traced by an early deformative response at very long period. It appears as a transient oscillating signal characterized by a period of about three days that modulates the explosion amplitudes. In a conceptual organ pipe-like model it is related to the chocking of the pipe. The successive activity can be interpreted as the response of volcano to restore the equilibrium condition

Seismic Hazard Mapping inside the Project SIGMA

The Project SIGMA (Sistema Integrato di sensori in ambiente cloud per la Gestione Multirischio Avanzata) arises from the fields of Information and Communications Technologies (ICT) and advanced applications for the control, monitoring and management of high-risk processes of natural and social origin. SIGMA is a multilevel architecture whose main aim is the acquisition, integration and processing of heterogeneous data from different sources (seismic, volcanic, meteorologic, hydric, pluvial, car traffic, marine traffic, and so on) to manage and elaborate risk mitigation strategies which are important for the emergency management planning. Within the several experimental activities included in the project, there is the designing and realization of a prototype of application platform specialized to provide the operating procedures and software to the public administrations and the industrial companies, for constantly monitoring both the anthropic and natural phenomena in Sicily. In this framework, of course, the seismic risk analysis plays a very important role since Sicily is one of the Italian regions with high seismic risk. Seismic risk assessment may be approached in two different ways: i) as average seismic risk of the buildings and facilities in question during the period considered, combining the vulnerability of different building types and the seismic hazard for the site, which are then expressed in terms of the effects of the events derived from an earthquake catalogue that exceed a specified threshold during a given period; ii) as estimated damage of the buildings and the critical facilities using a scenario input described in terms of the source parameters of the hypocenter as location, magnitude, and so on. Here we deal with the hazard calculation through the code CRISIS (Ordaz, Aguilar and Arboleda) and with the code PROSCEN (PRObabilistic SCENario, [Rotondi and Zonno, 2010]) to obtain earthquake scenario to be used in the latter approach. Indeed, an earthquake scenario is a planning tool that helps decision makers to visualize the specific impact of an earthquake based on the scientific knowledge. An earthquake scenario creates a picture that the members of community can recognize and, at the same time, improves the communication between the scientific, emergency management and policy communities to seismic risk reduction

Intrinsic Qp at Mt. Etna from the inversion of rise times of 2002 microearthquake sequence

About three-hundred microearthquakes, preceeding and accompanying the 2002-2003 Mt. Etna flank eruption, were considered in this study. On the high-quality velocity seismograms, measurements of the first half cycle of the wave, the so-called rise time ?, were carried out. By using the rise time method, these data were inverted to infer an estimate of the intrinsic quality factor Qp of P waves and of the source rise time ?0 of the events, which represents an estimate of the duration of the rupture process. Two kind of inversions were carried out. In the first inversion ?0 was derived from the magnitude duration of the events, assuming a constant stress drop and Qp was inferred from the inversion of reduced rise times ???0. In the second inversion both ?0 and Qp were inferred from the inversion of rise times. To determine the model parameters that realize the compromise between model simplicity and quality of the fit, the corrected Akaike information criterion was used. After this analysis we obtained Qp=57±42. The correlation among the inferred ?0 and Qp, which is caused by some events which concomitantly have high ?0 (>30 ms) and high Qp (>100) indicates that the technique used is able to model rise time versus travel time trend only for source dimensions less than about 80 m

Interplay between Tectonics and Mount Etna’s Volcanism: Insights into the Geometry of the Plumbing System

Mt. Etna lies in front of the southeast-verging Apennine-Maghrebian fold-and-thrust belt, where the NNW-trending Malta Escarpment separates the Sicilian continental crust from the Ionian Mesozoic oceanic basin, presently subducting beneath the Calabrian arc (Selvaggi and Chiarabba, 1995). Seismic tomographic studies indicate the presence of a mantle plume beneath the volcano with a Moho transition at depth less than 20 km (Nicolich et al.,2000; Barberi et al., 2006). Geophysical and geological evidences suggest that the Mt. Etna magma ascent mechanism is related to the major NNW-trending lithospheric fault (Doglioni et al., 2001). However, the reason for the Mt. Etna mantle plume draining and channeling the magma from the upper mantle source to the surface is not yet clear. All models proposed in literature (Rittmann, 1973; Tanguy et al., 1997; Monaco et al.; 1997; Gvirtzman and Nur, 1999; Doglioni et al., 2001) do not explain why such a mantle plume has originated in this anomalous external position with respect to the arc magmatism and back-arc spreading zones associated with the Apennines subduction. Some ideas on the subduction rollback must be better developed through the comparison with new regional tomographic studies that are being released. Moreover, tomographic studies reveal a complex and large plumbing system below the volcano from -2 to -7 km a.s.l., wide up to 60 km2 that reduces itself in size down to -18 km of depth close to the apex of the mantle plume. Chiocci et al. (2011) found a large bulge on the underwater continental margin facing Mt. Etna, and suggested that the huge crystallized magma body intruded in the middle and upper continental crust was able to trigger an instability process involving the Sicilian continental margin during the last 0.1 Ma. This phenomenon induces the sliding of the volcano eastern flank observed since the 90s (Borgia et al, 1992; Lo Giudice and Rasà, 1992) because the effects of the bulge collapse are propagating upslope, and the continuous decompression at the volcano summit favors the ascent of basic magma without lengthy storage in the upper crust, as one might expect in a compressive tectonic regime. Taken together, these new evidences (tomographic, tectonic, volcanic) are concerned with the exceptional nature of Mt. Etna and raise the need to explain the origin of the mantle plume that supplies its volcanism. The lower crust and the uppermost mantle need to be better resolved in future experiments and studies. The use of regional and teleseismic events for tomography and receiver function analyses is required to explore a volume that has only marginally been investigated to date. The relation between the magma source in the mantle and the upper parts of the system, as well as the hypothesis above reported on the relation between tectonics and volcanism and the role of lithospheric faults, could be resolved only by applying seismological techniques able to better constrain broader and deeper models. Finally, although the recent tomographic inversions have progressively improved our knowledge of Etna’s shallow structure, highlighting a complex pattern of magma chambers and conduits with variable dimensions, the geometry of the conduits and the dimensions and shapes of small magmatic bodies still require greater investigation. Their precise definition is crucial to delineate a working model of this volcano in order to understand its behaviour and evolution. For this purpose, at least within the volcanic edifice, the precise locations of the seismo-volcanic signals can be considered a useful tool to constrain both the area and the depth range of magma degassing and the geometry of the shallow conduits. In this work, we furnish evidences that the tremor and LP locations allowed to track magma migration during the initial phase of the 2008-2009 eruption and in particular the initial northward dike intrusion, also confirmed by other geophysical, structural and volcanological observations (Aloisi et al., 2009; Bonaccorso et al., 2011), and the following fissure opening east of the summit area at the base of SEC. All these evidences, obtained by the marked improvement in the monitoring system together with the development of new processing techniques, allowed us to constrain both the area and the depth range of magma degassing, highlighting the geometry of the magmatic system feeding the 2008-2009 eruption

Kidney Transplantation From Donors with Hepatitis B

The growing demand for organ donors to supply the increasing number of patients on kidney waiting lists has led most transplant centers to develop protocols that allow safe use of organs from donors with special clinical situations previously regarded as contraindications. Deceased donors with previous hepatitis B may be a safe resource to increase the donor pool even if there is still controversy among transplantation centers regarding the use of hepatitis B surface antigen-positive donors for renal transplantation. However, when allocated to serology-matched recipients, kidney transplantation from donors with hepatitis B may result in excellent short-term outcome. Many concerns may arise in the long-term outcome, and studies must address the evaluation of the progression of liver disease and the rate of reactivation of liver disease in the recipients. Accurate selection and matching of both donor and recipient and correct post-transplant management are needed to achieve satisfactory long-term outcomes

Real-time urban seismic network and structural monitoring by means of accelerometric sensors: Application to the historic buildings of Catania (Italy)

A real-time urban seismic network for seismic and structural health monitoring is being installed in the city of Catania (Sicily, Italy). The 27 monitoring stations, specifically designed and assembled, equipped with a low-noise 3-axial MEMS accelerometer, are located in 23 high exposure and vulnerability buildings. In this paper we present the characteristics of the monitoring station and of the network. In case of strong seismic events, the system will provide shake maps to the emergency management centre, and will allow to assess the health conditions of the monitored buildings. The network is conceived to be further expandable over the whole historical city centre of the city of Catania.PublishedMilan, Italy1IT. Reti di monitoraggi