Controlling the quality factor of a tuning-fork resonance between 9 K and 300 K for scanning-probe microscopy

We study the dynamic response of a mechanical quartz tuning fork in the temperature range from 9 K to 300 K. Since the quality factor Q of the resonance strongly depends on temperature, we implement a procedure to control the quality factor of the resonance. We show that we are able to dynamically change the quality factor and keep it constant over the whole temperature range. This procedure is suitable for applications in scanning probe microscopy.Comment: 5 pages, 6 figure

Formation, Manipulation, and Elasticity Measurement of a Nanometric Column of Water Molecules

Nanometer-sized columns of condensed water molecules are created by an atomic-resolution force microscope operated in ambient conditions. Unusual stepwise decrease of the force gradient associated with the thin water bridge in the tip-substrate gap is observed during its stretch, exhibiting regularity in step heights (~0.5 N/m) and plateau lengths (~1 nm). Such "quantized" elasticity is indicative of the atomic-scale stick-slip at the tip-water interface. A thermodynamic-instability-induced rupture of the water meniscus (5-nm long and 2.6-nm wide) is also found. This work opens a high-resolution study of the structure and the interface dynamics of a nanometric aqueous column.Comment: 4 pages, 3 figure

Local probing of ionic diffusion by electrochemical strain microscopy: spatial resolution and signal formation mechanisms

Electrochemical insertion-deintercalation reactions are typically associated with significant change of molar volume of the host compound. This strong coupling between ionic currents and strains underpins image formation mechanisms in electrochemical strain microscopy (ESM), and allows exploring the tip-induced electrochemical processes locally. Here we analyze the signal formation mechanism in ESM, and develop the analytical description of operation in frequency and time domains. The ESM spectroscopic modes are compared to classical electrochemical methods including potentiostatic and galvanostatic intermittent titration (PITT and GITT), and electrochemical impedance spectroscopy (EIS). This analysis illustrates the feasibility of spatially resolved studies of Li-ion dynamics on the sub-10 nanometer level using electromechanical detection.Comment: 49 pages, 17 figures, 4 tables, 3 appendices, to be submitted to J. Appl. Phys

Dynamic Behavior in Piezoresponse Force Microscopy

Frequency dependent dynamic behavior in Piezoresponse Force Microscopy (PFM) implemented on a beam-deflection atomic force microscope (AFM) is analyzed using a combination of modeling and experimental measurements. The PFM signal comprises contributions from local electrostatic forces acting on the tip, distributed forces acting on the cantilever, and three components of the electromechanical response vector. These interactions result in the bending and torsion of the cantilever, detected as vertical and lateral PFM signals. The relative magnitudes of these contributions depend on geometric parameters of the system, the stiffness and frictional forces of tip-surface junction, and operation frequencies. The dynamic signal formation mechanism in PFM is analyzed and conditions for optimal PFM imaging are formulated. The experimental approach for probing cantilever dynamics using frequency-bias spectroscopy and deconvolution of electromechanical and electrostatic contrast is implemented.Comment: 65 pages, 15 figures, high quality version available upon reques

Robust plasmon waveguides in strongly-interacting nanowire arrays

Arrays of parallel metallic nanowires are shown to provide a tunable, robust, and versatile platform for plasmon interconnects, including high-curvature turns with minimum signal loss. The proposed guiding mechanism relies on gap plasmons existing in the region between adjacent nanowires of dimers and multi-wire arrays. We focus on square and circular silver nanowires in silica, for which excellent agreement between both boundary element method and multiple multipolar expansion calculations is obtained. Our work provides the tools for designing plasmon-based interconnects and achieving high degree of integration with minimum cross talk between adjacent plasmon guides.Comment: 4 pages, 5 figure

P/2010A2 LINEAR - I: An impact in the Asteroid Main Belt

Comet P/2010A2 LINEAR is a good candidate for membership with the Main Belt Comet family. It was observed with several telescopes (ESO NTT, La Silla; Gemini North, Mauna Kea; UH 2.2m, Mauna Kea) from 14 Jan. until 19 Feb. 2010 in order to characterize and monitor it and its very unusual dust tail, which appears almost fully detached from the nucleus; the head of the tail includes two narrow arcs forming a cross. The immediate surroundings of the nucleus were found dust-free, which allowed an estimate of the nucleus radius of 80-90m. A model of the thermal evolution indicates that such a small nucleus could not maintain any ice content for more than a few million years on its current orbit, ruling out ice sublimation dust ejection mechanism. Rotational spin-up and electrostatic dust levitations were also rejected, leaving an impact with a smaller body as the favoured hypothesis, and ruling out the cometary nature of the object. The impact is further supported by the analysis of the tail structure. Finston-Probstein dynamical dust modelling indicates the tail was produced by a single burst of dust emission. More advanced models, independently indicate that this burst populated a hollow cone with a half-opening angle alpha~40degr and with an ejection velocity v_max ~ 0.2m/s, where the small dust grains fill the observed tail, while the arcs are foreshortened sections of the burst cone. The dust grains in the tail are measured to have radii between a=1-20mm, with a differential size distribution proportional to a^(-3.44 +/- 0.08). The dust contained in the tail is estimated to at least 8x10^8kg, which would form a sphere of 40m radius. Analysing these results in the framework of crater physics, we conclude that a gravity-controlled crater would have grown up to ~100m radius, i.e. comparable to the size of the body. The non-disruption of the body suggest this was an oblique impact.Comment: 15 pages, 11 figures, in pres

Damping of optomechanical disks resonators vibrating in air

We report on miniature GaAs disk optomechanical resonators vibrating in air in the radiofrequency range. The flexural modes of the disks are studied by scanning electron microscopy and optical interferometry, and correctly modeled with the elasticity theory for annular plates. The mechanical damping is systematically measured, and confronted with original analytical models for air damping. Formulas are derived that correctly reproduce both the mechanical modes and the damping behavior, and can serve as design tools for optomechanical applications in fluidic environment

Testing the Standard Model and Schemes for Quark Mass Matrices with CP Asymmetries in B Decays

The values of $\sin (2 \alpha)$ and $\sin (2 \beta)$, where $\alpha$ and $\beta$ are angles of the unitarity triangle, will be readily measured in a B factory (and maybe also in hadron colliders). We study the standard model constraints in the $\sin (2 \alpha) - \sin (2 \beta)$ plane. We use the results from recent analyses of $f_B$ and $\tau_b|V_{cb}|^2$ which take into account heavy quark symmetry considerations. We find $\sin (2 \beta) \geq 0.15$ and most likely \sin (2 \beta) \roughly{>} 0.6, and emphasize the strong correlations between $\sin (2 \alpha)$ and $\sin (2 \beta)$. Various schemes for quark mass matrices allow much smaller areas in the $\sin (2 \alpha) - \sin (2 \beta)$ plane. We study the schemes of Fritzsch, of Dimopoulos, Hall and Raby, and of Giudice, as well as the ``symmetric CKM'' idea, and show how CP asymmetries in B decays will crucially test each of these schemes.Comment: 11 pages and 4 postscript figures available on request, LaTeX, WIS-92/52/Jun-PH, LBL-3256

Gravitational Smearing of Minimal Supersymmetric Unification Predictions

A short and mean paper.Comment: 10 pages total + 1 postscript figure (included), revised: all lines are TRULY < 70 characters long (try it!); LBL-32905, UCB-PTH-92/3