1,766 research outputs found

    Superlattice barrier varactors

    Get PDF
    SBV (Single Barrier Varactor) diodes have been proposed as alternatives to Schottky barrier diodes for harmonic multiplier applications. However, these show a higher current than expected. The excess current is due to X valley transport in the barrier. We present experimental results showing that the use of a superlattice barrier and doping spikes in the GaAs depletion regions on either side of the barrier can reduce the excess current and improve the control of the capacitance vs. voltage characteristic. The experimental results consist of data taken from two types of device structures. The first test structure was used to study the performance of AlAs/GaAs superlattice barriers. The wafer was fabricated into 90 micron diameter mesa diodes and the resulting current vs. voltage characteristics were measured. A 10 period superlattice structure with a total thickness of approximately 400 A worked well as an electron barrier. The structure had a current density of about one A/sq cm at one volt at room temperature. The capacitance variation of these structures was small because of the design of the GaAs cladding layers. The second test structure was used to study cladding layer designs. These wafers were InGaAs and InAlAs layers lattice matched to an InP substrate. The layers have n(+) doping spikes near the barrier to increase the zero bias capacitance and control the shape of the capacitance vs. voltage characteristic. These structures have a capacitance ratio of 5:1 and an abrupt change from maximum to minimum capacitance. The measurements were made at 80 K. Based on the information obtained from these two structures, we have designed a structure that combines the low current density barrier with the improved cladding layers. The capacitance and current-voltage characteristics from this structure are presented

    Nonlinear effects in the black hole ringdown: absorption-induced mode excitation

    Get PDF
    Gravitational-wave observations of black hole ringdowns are commonly used to characterize binary merger remnants and to test general relativity. These analyses assume linear black hole perturbation theory, in particular that the ringdown can be described in terms of quasinormal modes even for times approaching the merger. Here we investigate a nonlinear effect during the ringdown, namely how a mode excited at early times can excite additional modes as it is absorbed by the black hole. This is a third-order secular effect: the change in the black-hole mass causes a shift in the mode spectrum, so that the original mode is projected onto the new ones. Using nonlinear simulations, we study the ringdown of a spherically-symmetric scalar field around an asymptotically anti-de Sitter black hole, and we find that this "absorption-induced mode excitation" (AIME) is the dominant nonlinear effect. We show that this effect takes place well within the nonadiabatic regime, so we can analytically estimate it using a sudden mass-change approximation. Adapting our estimation technique to asymptotically-flat Schwarzschild black holes, we expect AIME to play a role in the analysis and interpretation of current and future gravitational wave observations

    Hydrodynamic motion of guiding elements within a magnetic switchyard in fast ignition conditions

    Get PDF
    Magnetic collimation via resistivity gradients is an innovative approach to electron beam control for the cone-guided fast ignition variant of inertial confinement fusion. This technique uses a resistivity gradient induced magnetic field to collimate the electron beam produced by the high-intensity laser–plasma interaction within a cone-guided fast ignition cone-tip. A variant of the resistive guiding approach, known as the “magnetic switchyard,” has been proposed which uses shaped guiding elements to direct the electrons toward the compressed fuel. Here, the 1D radiation-hydrodynamics code HYADES is used to investigate and quantify the gross hydrodynamic motion of these magnetic switchyard guiding elements in conditions relevant to their use in fast ignition. Movement of the layers was assessed for a range of two-layer material combinations. Based upon the results of the simulations, a scaling law is found that enables the relative extent of hydrodynamic motion to be predicted based upon the material properties of the switchyard, thereby enabling optimization of material-combination choice on the basis of reducing hydrodynamic motion. A multi-layered configuration, more representative of an actual switchyard, was also simulated in which an outer Au layer is employed to tamp the motion of the outermost guiding element of the switchyard

    Development, implementation and evaluation of a clinical research engagement and leadership capacity building program in a large Australian health care service

    Full text link
    BACKGROUND: Health professionals need to be integrated more effectively in clinical research to ensure that research addresses clinical needs and provides practical solutions at the coal face of care. In light of limited evidence on how best to achieve this, evaluation of strategies to introduce, adapt and sustain evidence-based practices across different populations and settings is required. This project aims to address this gap through the co-design, development, implementation, evaluation, refinement and ultimately scale-up of a clinical research engagement and leadership capacity building program in a clinical setting with little to no co-ordinated approach to clinical research engagement and education. METHODS/DESIGN: The protocol is based on principles of research capacity building and on a six-step framework, which have previously led to successful implementation and long-term sustainability. A mixed methods study design will be used. Methods will include: (1) a review of the literature about strategies that engage health professionals in research through capacity building and/or education in research methods; (2) a review of existing local research education and support elements; (3) a needs assessment in the local clinical setting, including an online cross-sectional survey and semi-structured interviews; (4) co-design and development of an educational and support program; (5) implementation of the program in the clinical environment; and (6) pre- and post-implementation evaluation and ultimately program scale-up. The evaluation focuses on research activity and knowledge, attitudes and preferences about clinical research, evidence-based practice and leadership and post implementation, about their satisfaction with the program. The investigators will evaluate the feasibility and effect of the program according to capacity building measures and will revise where appropriate prior to scale-up. DISCUSSION: It is anticipated that this clinical research engagement and leadership capacity building program will enable and enhance clinically relevant research to be led and conducted by health professionals in the health setting. This approach will also encourage identification of areas of clinical uncertainty and need that can be addressed through clinical research within the health setting

    Measured g factors and the tidal-wave description of transitional nuclei near A = 100

    Get PDF
    The transient-field technique has been used in both conventional kinematics and inverse kinematics to measure the g factors of the 2+ states in the stable even isotopes of Ru, Pd and Cd. The statistical precision of the g(2+) values has been significantly improved, allowing a critical comparison with the tidal-wave version of the cranking model recently proposed for transitional nuclei in this region.Comment: Accepted for publication in Physical Review C, April 201

    The First Detections of the Extragalactic Background Light at 3000, 5500, and 8000A (II): Measurement of Foreground Zodiacal Light

    Get PDF
    We present a measurement of the absolute surface brightness of the zodiacal light (3900-5100A) toward a fixed extragalactic target at high ecliptic latitude based on moderate resolution (~1.3A per pixel) spectrophotometry obtained with the du Pont 2.5m telescope at Las Campanas Observatory in Chile. This measurement and contemporaneous Hubble Space Telescope data from WFPC2 and FOS comprise a coordinated program to measure the mean flux of the diffuse extragalactic background light (EBL). The zodiacal light at optical wavelengths results from scattering by interplanetary dust, so that the zodiacal light flux toward any extragalactic target varies seasonally with the position of the Earth. This measurement of zodiacal light is therefore relevant to the specific observations (date and target field) under discussion. To obtain this result, we have developed a technique that uses the strength of the zodiacal Fraunhofer lines to identify the absolute flux of the zodiacal light in the multiple-component night sky spectrum. Statistical uncertainties in the result are 0.6% (1 sigma). However, the dominant source of uncertainty is systematic errors, which we estimate to be 1.1% (1 sigma). We discuss the contributions included in this estimate explicitly. The systematic errors in this result contribute 25% in quadrature to the final error in our coordinated EBL measurement, which is presented in the first paper of this series.Comment: Accepted for publication in ApJ, 22 pages using emulateapj.sty, version with higher resolution figures available at http://www.astro.lsa.umich.edu/~rab/publications.html or at http://nedwww.ipac.caltech.edu/level5/Sep01/Bernstein2/frames.htm

    InGaAs/InP hot electron transistors grown by chemical beam epitaxy

    Full text link
    In this letter, we report on the dc performance of chemical beam epitaxy grown InGaAs/InP hot electron transistors (HETs). The highest observed differential ÎČ (dIC/dIB) is over 100. The HETs have Pd/Ge/Ti/Al shallow ohmic base contacts with diffusion lengths less than 300 Å. Furthermore, we also demonstrated ballistic transport of electrons in an InGaAs/InP HET by obtaining an energy distribution of electrons with ∌60 meV full width at half maximum. The measured conduction band discontinuity of InGaAs/InP is 250.3 meV, which is 39.8% of the band gap difference.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/70748/2/APPLAB-61-2-189-1.pd

    Preparedness of Australian and British nurses and midwives about domestic violence and abuse

    Get PDF
    BACKGROUND: Domestic violence and abuse (DVA) is a major health problem that affects individuals across the world. Nurses, midwives and healthcare providers need to be confident and competent in identifying and responding to DVA. AIMS: To measure current levels of knowledge, opinions and preparedness towards DVA and how it is managed by registered nurses and midwives residing in Australia and the UK. METHODS: A cross-sectional study design was used. Data were collected using the Physician Readiness to Manage Intimate Partner Violence Survey (PREMIS) measuring the perceived preparation and knowledge, actual knowledge, opinions and practice issues. Australian data were collected in 2018 and UK data were collected in 2017-2018. Descriptive and inferential statistics were used to analyse the data and differences in knowledge and attitudes of British and Australian nurses. FINDINGS: Nurses and midwives (n = 368; 130 from Australia; 238 from the UK) responded to the survey. Minimal previous DVA training was reported by the participants. Participants had minimal knowledge about DVA, though had a positive attitude towards engaging with women experiencing DVA. DISCUSSION: Most participants felt unprepared to ask relevant questions about DVA and had inadequate knowledge about available resources. Australian participants scored better than British participants; however, the mean difference in all aspects remained statistically insignificant. CONCLUSION: Australian and British nurses and midwives have a positive attitude towards women experiencing DVA; however, the knowledge and skills to support women experiencing DVA are limited. IMPLICATIONS FOR NURSING POLICY: Nursing institutions should develop strategic policies regarding mandatory preparation and training of nurses for domestic violence assessment and management
    • 

    corecore