14,365 research outputs found
Radio wave propagation experiments to probe the ionosphere
Ionospheric bias corrections associated with radio tracking of spacecraft depend on the following measuring techniques for integrated electron content: (1) Faraday rotation measurements from an earth synchronous satellite; (2) ranging measurements at two frequencies; and (3) group and phase velocity measurements obtained from tracking data. The extraction of the integrated electron content directly from tracking data is achieved by comparison of range-rate measurements based on Doppler shift with differentiated range measurements based on tone delay. This method is most desirable because the measured corrections pertain directly to the spacecraft whose orbit is being determined and can be used in near earth as well as deep space tracking data
Lunar far-side communication satellites
Data relay and tracking capability of lunar communication satellite
Orbit determination accuracies using satellite-to-satellite tracking
The uncertainty in relay satellite sate is a significant error source which cannot be ignored in the reduction of satellite-to-satellite tracking data. Based on simulations and real data reductions, it is numerically impractical to use simultaneous unconstrained solutions to determine both relay and user satellite epoch states. A Bayesian or least squares estimation technique with an a priori procedure is presented which permits the adjustment of relay satellite epoch state in the reduction of satellite-to-satellite tracking data without the numerical difficulties introduced by an ill-conditioned normal matrix
Satellite-to-satellite system and orbital error estimates
Satellite-to-satellite tracking and orbit computation accuracy is evaluated on the basis of data obtained from near earth spacecraft via the geostationary ATS-6. The near earth spacecraft involved are Apollo-Soyuz, GEOS-3, and NIMBUS-6. In addition ATS-6 is being tracked by a new scheme wherein a single ground transmitter interrogates several ground based transponders via ATS-6 to achieve the precision geostationary orbits essential in satellite-to-satellite orbit computation. Also one way Doppler data is being recorded aboard NIMBUS-6 to determine the position of meteorological platforms. Accuracy assessments associated with the foregoing mission related experiments are discussed
A new method for satellite orbit determination using an operational worldwide transponder network
The method utilizes computer programs developed for the forthcoming ATS-F/NIMBUS-F tracking and data relay experiment where the basic tracking measurements are multiple path round-trip propagation times and rates. This method of orbit computation has recently been successfully evaluated by tracking a geostationary satellite (ATS-3) using an existing VHF (150 MHz) network of automatic transponders. A master station sequentially interrogates each transponder via the ATS-3. The master site is located at Schenectady, N. Y. and four automatic transponders were located at Shannon, Reykajavik, Buenos Aires, and Seattle respectively. Data at hourly intervals were collected during a 24 hour period on April 18-19, 1973. After correcting this data for known systematic errors it was provided as input to an orbit determination program where all satellite motions during signal propagation are rigorously accounted for. The resulting estimated ATS-3 orbit yielded observational residuals on the order of 100 meters. By using more than one satellite the present scheme is further capable of accurately locating several stationary or mobile terminals as part of the overall orbital solution
Geodetic Earth Orbiting Satellite /GEOS-C/, Applications Technology Satellite /ATS-F/ tracking experiment
Design analysis of GEOS-C/ATS-F tracking experimen
The Conversion of Fundamental Tracking Data to Metric Form
Conversion of fundamental radar tracking data to metric for
Non-linear optomechanical measurement of mechanical motion
Precision measurement of non-linear observables is an important goal in all
facets of quantum optics. This allows measurement-based non-classical state
preparation, which has been applied to great success in various physical
systems, and provides a route for quantum information processing with otherwise
linear interactions. In cavity optomechanics much progress has been made using
linear interactions and measurement, but observation of non-linear mechanical
degrees-of-freedom remains outstanding. Here we report the observation of
displacement-squared thermal motion of a micro-mechanical resonator by
exploiting the intrinsic non-linearity of the radiation pressure interaction.
Using this measurement we generate bimodal mechanical states of motion with
separations and feature sizes well below 100~pm. Future improvements to this
approach will allow the preparation of quantum superposition states, which can
be used to experimentally explore collapse models of the wavefunction and the
potential for mechanical-resonator-based quantum information and metrology
applications.Comment: 8 pages, 4 figures, extensive supplementary material available with
published versio
Explanation of the computer listings of Faraday factors for INTASAT users
Using a simplified form of the Appleton-Hartree formula for the phase refractive index, a relationship was obtained between the Faraday rotation angle along the angular path and the total electron content along the vertical path, intersecting the angular at the height of maximum electron density. Using the second mean value theorem of integration, the function B cosine theta second chi was removed from under the integral sign and replaced by a 'mean' value. The mean value factors were printed on the computer listing for 39 stations receiving signals from the INTASAT satellite during the specified time period. The data is presented by station and date. Graphs are included to demonstrate the variation of the Faraday factor with local time and season, with magnetic latitude, elevation and azimuth angles. Other topics discussed include a description of the bent ionospheric model, the earth's magnetic field model, and the sample computer listing
Disorder Induced Stripes in d-Wave Superconductors
Stripe phases are observed experimentally in several copper-based high-Tc
superconductors near 1/8 hole doping. However, the specific characteristics may
vary depending on the degree of dopant disorder and the presence or absence of
a low- temperature tetragonal phase. On the basis of a Hartree-Fock decoupling
scheme for the t-J model we discuss the diverse behavior of stripe phases. In
particular the effect of inhomogeneities is investigated in two distinctly
different parameter regimes which are characterized by the strength of the
interaction. We observe that small concen- trations of impurities or vortices
pin the unidirectional density waves, and dopant disorder is capable to
stabilize a stripe phase in parameter regimes where homogeneous phases are
typically favored in clean systems. The momentum-space results exhibit
universal features for all coexisting density-wave solutions, nearly unchanged
even in strongly disordered systems. These coexisting solutions feature
generically a full energy gap and a particle-hole asymmetry in the density of
states.Comment: 28 pages, 8 figure
- …