Escheat in Washington

Since the income of the state is dependent upon the income of the inhabitants, whatever diminishes their income also diminishes that of the state. Thus during times of depression when the people are unemployed and property becomes depreciated in value the income of the state, largely based upon taxation, becomes to that ,extent lessened. Therefore, when the taxes become insufficient, the tendency is to look to other sources of revenue which during prosperous times are often overlooked. One of these sources of revenue is escheat. There have been two recent decisions upon the subject in Washington. In the Allen case it was held that the award of a claim for funeral and interment by the court was not res adjudicata, and, that the party having died intestate and without heirs, the supervisor of inheritance and escheat could, upon final hearing, object to the claim, upon which the court must determine the reasonableness of such claim

LIQUID AIR INTERFACE CORROSION TESTING FOR FY2010

An experimental study was undertaken to investigate the corrosivity to carbon steel of the liquid-air interface of dilute simulated radioactive waste solutions. Open-circuit potentials were measured on ASTM A537 carbon steel specimens located slightly above, at, and below the liquid-air interface of simulated waste solutions. The 0.12-inch-diameter specimens used in the study were sized to respond to the assumed distinctive chemical environment of the liquid-air interface, where localized corrosion in poorly inhibited solutions may frequently be observed. The practical inhibition of such localized corrosion in liquid radioactive waste storage tanks is based on empirical testing and a model of a liquid-air interface environment that is made more corrosive than the underlying bulk liquid due to chemical changes brought about by absorbed atmospheric carbon dioxide. The chemical changes were assumed to create a more corrosive open-circuit potential in carbon in contact with the liquid-air interface. Arrays of 4 small specimens spaced about 0.3 in. apart were partially immersed so that one specimen contacted the top of the meniscus of the test solution. Two specimens contacted the bulk liquid below the meniscus and one specimen was positioned in the vapor space above the meniscus. Measurements were carried out for up to 16 hours to ensure steady-state had been obtained. The results showed that there was no significant difference in open-circuit potentials between the meniscus-contact specimens and the bulk-liquid-contact specimens. With the measurement technique employed, no difference was detected between the electrochemical conditions of the meniscus versus the bulk liquid. Stable open-circuit potentials were measured on the specimen located in the vapor space above the meniscus, showing that there existed an electrochemical connection through a thin film of solution extending up from the meniscus. This observation supports the Hobbs-Wallace model of the development of the pitting susceptibility of carbon steel in alkaline solutions

VAPOR SPACE AND LIQUID/AIR INTERFACECORROSION TESTS

The phenomena of vapor space corrosion and liquid/air interface corrosion of carbon steel in simulated liquid waste environments have been investigated. Initial experiments have explored the hypothesis that vapor space corrosion may be accelerated by the formation of a corrosive electrolyte on the tank wall by a process of evaporation of relatively warmer waste and condensation of the vapor on the relatively cooler tank wall. Results from initial testing do not support the hypothesis of electrolyte transport by evaporation and condensation. The analysis of the condensate collected by a steel specimen suspended over a 40 C simulated waste solution showed no measurable concentrations of the constituents of the simulated solution and a decrease in pH from 14 in the simulant to 5.3 in the condensate. Liquid/air interface corrosion was studied as a galvanic corrosion system, where steel at the interface undergoes accelerated corrosion while steel in contact with bulk waste is protected. The zero-resistance-ammeter technique was used to measure the current flow between steel specimens immersed in solutions simulating (1) the high-pH bulk liquid waste and (2) the expected low-pH meniscus liquid at the liquid/air interface. Open-circuit potential measurements of the steel specimens were not significantly different in the two solutions, with the result that (1) no consistent galvanic current flow occurred and (2) both the meniscus specimen and bulk specimen were subject to pitting corrosion

Jet quenching pattern at LHC in PYQUEN model

The first LHC data on high transverse momentum hadron and dijet spectra in PbPb collisions at center-of-mass energy 2.76 TeV per nucleon pair are analyzed in the frameworks of PYQUEN jet quenching model. The presented studies for the nuclear modification factor of high-pT hadrons and the imbalance in dijet transverse energy support the supposition that the intensive wide-angular ("out-of-cone") medium-induced partonic energy loss is seen in central PbPb collisions at the LHC.Comment: 5 pages including 4 figures as EPS-files; prepared using LaTeX package for publication in the European Physical Journal

MEM-BRAIN gas separation membranes for zero-emission fossil power plants

The aim of the MEM-BRAIN project is the development and integration of gas separation membranes for zero-emission fossil power plants. This will be achieved by selective membranes with high permeability for CO2, O2 or H2, so that high-purity CO2 is obtained in a readily condensable form. The project is being implemented by the “MEM-BRAIN” Helmholtz Alliance consisting of research centres, universities and industrial partners.\ud \ud The MEM-BRAIN project focuses on the development, process engineering, system integration and energy systems analysis of different gas separation membranes for the different CO2 capture process routes in fossil power plants

Transport Theoretical Description of Collisional Energy Loss in Infinite Quark-Gluon Matter

We study the time evolution of a high-momentum gluon or quark propagating through an infinite, thermalized, partonic medium utilizing a Boltzmann equation approach. We calculate the collisional energy loss of the parton, study its temperature and flavor dependence as well as the the momentum broadening incurred through multiple interactions. Our transport calculations agree well with analytic calculations of collisional energy-loss where available, but offer the unique opportunity to address the medium response as well in a consistent fashion.Comment: 12 pages, updated with additional references and typos correcte

CONTAINER MATERIALS, FABRICATION AND ROBUSTNESS

The multi-barrier 3013 container used to package plutonium-bearing materials is robust and thereby highly resistant to identified degradation modes that might cause failure. The only viable degradation mechanisms identified by a panel of technical experts were pressurization within and corrosion of the containers. Evaluations of the container materials and the fabrication processes and resulting residual stresses suggest that the multi-layered containers will mitigate the potential for degradation of the outer container and prevent the release of the container contents to the environment. Additionally, the ongoing surveillance programs and laboratory studies should detect any incipient degradation of containers in the 3013 storage inventory before an outer container is compromised

Multimodal imaging in acute retinal ischemia: spectral domain OCT, OCT-angiography and fundus autofluorescence

AIM: To describe retinal findings of various imaging modalities in acute retinal ischemia. METHODS: Fluorescein angiography (FA), spectral domain optical coherence tomography (SD-OCT), OCT-angiography (OCT-A) and fundus autofluorescence (FAF) images of 13 patients (mean age 64y, range 28-86y) with acute retinal ischemia were evaluated. Six suffered from branch arterial occlusion, 2 had a central retinal artery occlusion, 2 had a combined arteriovenous occlusions, 1 patient had a retrobulbar arterial compression by an orbital haemangioma and 2 patients showed an ocular ischemic syndrome. RESULTS: All patients showed increased reflectivity and thickening of the ischemic retinal tissue. In 10 out of 13 patients SD-OCT revealed an additional highly reflective band located within or above the outer plexiform layer. Morphological characteristics were a decreasing intensity with distance from the fovea, partially segmental occurrence and manifestation limited in time. OCT-A showed a loss of flow signal in the superficial and deep capillary plexus at the affected areas. Reduced flow signal was detected underneath the regions with retinal edema. FAF showed areas of altered signal intensity at the posterior pole. The regions of decreased FAF signal corresponded to peri-venous regions. CONCLUSION: Multimodal imaging modalities in retinal ischemia yield characteristic findings and valuable diagnostic information. Conventional OCT identifies hyperreflectivity and thickening and a mid-retinal hyperreflective band is frequently observed. OCT-A examination reveals demarcation of the ischemic retinal area on the vascular level. FAF shows decreased fluorescence signal in areas of retinal edema often corresponding to peri-venous regions

LOCALIZED CORROSION OF AUSTENITIC STAINLESS STEELEXPOSED TO MIXTURES OF PLUTONIUM OXIDE AND CHLORIDE SALTS

Laboratory corrosion tests were conducted to investigate the corrosivity of moist plutonium oxide/chloride (PuO{sub 2}/Cl-) salt mixtures on 304L and 316L stainless steel coupons. The tests exposed flat coupons for pitting evaluation and 'teardrop' stressed coupons for stress corrosion cracking (SCC) evaluation at room temperature to various mixtures of PuO{sub 2} and chloride-bearing salts for periods up to 500 days. The two flat coupons were placed so that the solid oxide/salt mixture contacted about one half of the coupon surface. One teardrop coupon was placed in contact with solid mixture; the second teardrop was in contact with the headspace gas only. The mixtures were loaded with nominally 0.5 wt % water under a helium atmosphere. Observations of corrosion ranged from superficial staining to pitting and SCC. The extent of corrosion depended on the total salt concentration and on the composition of the salt. The most significant corrosion was found in coupons that were exposed to 98 wt % PuO{sub 2}, 2 wt % chloride salt mixtures that contained calcium chloride. SCC was observed in two 304L stainless steel teardrop coupons exposed in solid contact to a mixture of 98 wt % PuO{sub 2}, 0.9 wt % NaCl, 0.9 wt % KCl, and 0.2 wt % CaCl{sub 2}. The cracking was associated with the heat-affected zone of an autogenous weld that ran across the center of the coupon. Cracking was not observed in coupons exposed to the headspace gas, nor in coupons exposed to other mixtures with either 0.92 wt% CaCl{sub 2} or no CaCl{sub 2}. The corrosion results point to the significance of the interaction between water loading and the concentration of the hydrating salt CaCl{sub 2} in the susceptibility of austenitic stainless steels to corrosion