Surface modification of HVOF thermal sprayed WC–CoCr coatings by laser treatment

In this work the affects of laser characteristics on microstructure and microhardness of high velocity oxygen fuel sprayed (HVOF) WC–CoCr coatings were investigated. The coating was deposited with a Sulzer Metco WokaJet™-400 kerosene fuel and the laser surface treatments were applied using CO2 laser with 10.6 μm wavelength. Large variations in surface properties were produced from variation in the laser processing parameters. In total, four levels of peak power (100, 200, 300 and 350 W), four levels of spot diameter (0.2, 0.4, 0.6 and 1 mm) and three levels of pulse repetition frequency (PRF) were investigated. An initial set of tests were followed by a more detailed 33 factorial design of experiments. Pulse repetition frequency and duty cycle were set in order to maintain the same overlap in the x and y directions for the raster scanned sample spot impact dimensions. Overlaps of 30% were used in the initial tests and 10% in the more detailed trials. The results have shown that care must be taken to keep the irradiance at a relatively low level compared to uncoated surfaces. High irradiance can in this case result in rough and porous surfaces. Lower levels of irradiance are shown to provide more uniform microstructures, reduced porosity and increased microhardness

Auditory verbal hallucinations and childhood trauma subtypes across the psychosis continuum:a cluster analysis

Introduction: A strong link between voice-hearing experience and childhood trauma has been established. The aim of this study was to identify whether there were unique clusters of childhood trauma subtypes in a sample across the clinical spectrum of auditory verbal hallucinations (AVH) and to examine clinical and phenomenological features across these clusters. Methods: Combining two independent international datasets (the Netherlands and Australia), childhood trauma subtypes were examined using hierarchical cluster analysis. Clinical and phenomenological characteristics were compared across emerging clusters using MANOVA and chi-squared analyses. Results: The total sample (n = 413) included 166 clinical individuals with a psychotic disorder and AVH, 122 non-clinical individuals with AVH and 125 non-clinical individuals without AVH. Three clusters emerged: (1) low trauma (n = 299); (2) emotion-focused trauma (n = 71); (3) multi-trauma (n = 43). The three clusters differed significantly on their AVH ratings of amount of negative content, with trend-level effects for loudness, degree of negative content and degree of experienced distress. Furthermore, perceptions of voices being malevolent, benevolent and resistance towards voices differed significantly. Conclusion: The data revealed different types of childhood trauma had different relationships between clinical and phenomenological features of voice-hearing experiences. Thus, implicating different mechanistic pathways and a need for tailored treatment approaches

Cellulosic films obtained from the treatment of sugarcane bagasse fibers with N -methylmorpholine- N -oxide (NMMO)

Ethanol/water organosolv pulping was used to obtain sugarcane bagasse pulp that was bleached with sodium chlorite. This bleached pulp was used to obtain cellulosic films that were further evaluated by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). A good film formation was observed when temperature of 74 °C and baths of distilled water were used, which after FTIR, TGA, and SEM analysis indicated no significant difference between the reaction times. The results showed this to be an interesting and promising process, combining the prerequisites for a more efficient utilization of agro-industrial residues.Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP), (CNPq), and Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES), Brazil; Fundação para a Ciência e a Tecnologia (FCT) and CEMU

Improving tribological properties of cast Al-Si alloys through application of wear-resistant thermal spray coatings

Flame Spray Thermal Spray coatings are low-cost, high-wear surface-treatment technologies. However, little has been reported on their potential effects on cast automotive aluminum alloys. The aim of this research was to investigate the tribological properties of as-sprayed NiCrBSi and WC/12Co Flame Spray coatings applied to two cast aluminum alloys: high-copper LM24 (AlSi8Cu3Fe), and low-copper LM25 (AlSi7Mg). Potential interactions between the mechanical properties of the substrate and the deposited coatings were deemed to be significant. Microstructural, microhardness, friction, and wear (pin-on-disk, microabrasion, Taber abrasion, etc.) results are reported, and the performance differences between coatings on the different substrates were noted. The coefficient of friction was reduced from 0.69-0.72 to 0.12-0.35. Wear (pin-on-disk) was reduced by a factor of 103-104, which was related to the high surface roughness of the coatings. Microabrasion wear was dependent on coating hardness and applied load. Taber abrasion results showed a strong dependency on the substrate, coating morphology, and homogeneity

Networks on Silicon: Combining Best-Effort and Guaranteed Services

We advocate a network on silicon (NOS) as a hardware architecture to implement communication between IP cores in future technologies, and as a software model in the form of a protocol stack to structure the programming of NOSs. We claim guaranteed services are essential. In the THEREAL NOS they pervade the NOS as a requirement for hardware design, and as foundation for software programming