110 research outputs found
NAUTILUS-DTU10 MW Floating Offshore Wind Turbine at Gulf of Maine: Public numerical models of an actively ballasted semisubmersible
This study presents two numerical multiphysics models of the NAUTILUS-10 floating support structure mounting the DTU10 MW Reference Wind Turbine at Gulf of Maine site, and analyses its dynamics. With the site conditions and the FAST model of the onshore turbine as the starting point, the floating support structure: tower, floating substructure with its corresponding active ballast system and station keeping system, was designed by NAUTILUS. The numerical models were developed and the onshore DTU wind energy controller was tuned to avoid the resonance of the operating FOWT by TECNALIA, in the framework of H2020 LIFES50+ project. This concept and its subsystems are fully characterised throughout this paper and implemented in opensource code, FAST v8.16. Here, the mooring dynamics are solved using MoorDyn, and the hydrodynamic properties are computed using HydroDyn. Viscous effects, not captured by radiation-diffraction theory, are modelled using two different approaches: (1) through linear and quadratic additional hydrodynamic damping matrices and (2) by means of Morison elements. A set of simulations (such as, decay, wind only and broadband irregular waves tests) were carried out with system identification purposes and to analyse the differences between the two models presented. Then, a set of simulations in stochastic wind and waves were carried out to characterise the global response of the FOWT.European Union Horizon2020
programme under the agreement H2020-LCE-2014-1-640741, LIFES50+ projec
Hydrodynamic identification of NAUTILUS FOWT platform from small scale tests
A small-scale tank test campaign of the NAUTILUS offshore wind floating semisub-mersible platform was held at the Ifremer Deep Water Basin within the framework of the MaRINET 2 project. The support structure consists in four stabilized columns on a square pontoon supporting a generic 8-MW wind turbine. The tests were carried out at 1:36 Froude scale in parked conditions, and the mooring system was modelled as a set of aerial mooring springs providing a nonlinear stiffness. The hydrodynamic characterization of the floater from experimental data was tackled by using traditional techniques in naval architecture), as well as approaches derived from operational modal analysis in the frequency domain, such as the Sub Space Identification—Covariance (SSI-COV) method. The validity of this approach and its potential application to the identification of such kind of structures is discussed against the results of a more traditional technique based on the fitting of decay tests
B-cell regeneration profile and minimal residual disease status in bone marrow of treated multiple myeloma patients
© 2021 by the authors.B-cell regeneration during therapy has been considered as a strong prognostic factor in multiple myeloma (MM). However, the effects of therapy and hemodilution in bone marrow (BM) B-cell recovery have not been systematically evaluated during follow-up. MM (n = 177) and adult (≥50y) healthy donor (HD; n = 14) BM samples were studied by next-generation flow (NGF) to simultaneously assess measurable residual disease (MRD) and residual normal B-cell populations. BM hemodilution was detected in 41 out of 177 (23%) patient samples, leading to lower total B-cell, B-cell precursor (BCP) and normal plasma cell (nPC) counts. Among MM BM, decreased percentages (vs. HD) of BCP, transitional/naïve B-cell (TBC/NBC) and nPC populations were observed at diagnosis. BM BCP increased after induction therapy, whereas TBC/NBC counts remained abnormally low. At day+100 postautologous stem cell transplantation, a greater increase in BCP with recovered TBC/NBC cell numbers but persistently low memory B-cell and nPC counts were found. At the end of therapy, complete response (CR) BM samples showed higher CD19− nPC counts vs. non-CR specimens. MRD positivity was associated with higher BCP and nPC percentages. Hemodilution showed a negative impact on BM B-cell distribution. Different BM B-cell regeneration profiles are present in MM at diagnosis and after therapy with no significant association with patient outcome.This work has been supported by the International Myeloma Foundation-Black Swan Research Initiative, the EuroFlow Consortium (grant LSHB-CT-2006-018708); Centro de Investigación Biomédica en Red de Cáncer (CIBER-ONC; Instituto de Salud Carlos III, Ministerio de Economía y Competitividad, Madrid, Spain and FONDOS FEDER), numbers: CB16/12/00400, CB16/12/00233, CB16/12/00369, CB16/12/00489 and CB16/12/00480; grant from Bilateral Cooperation Program between Coordenação de Aperfeiçoamento de Pessoal de Nível Superior-CAPES (Brasília/Brazil) and Dirección General de Políticas Universitárias (DGPU)-Ministério de Educación, Cultura y Deportes (Madrid/Spain) number DGPU 311/15; Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro of Brazil (FAPERJ) numbers: E26/110.105/2014 and E26/102.191/2013; grant from Conselho Nacional de Desenvolvimento Científico e Tecnológico of Brazil (CNPQ), number: 400194/2014-7. R.M.d.P. was supported by a grant from Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES/DGPU), number: 000281/2016-06 and CAPES/PROEX 641/2018, Brazil; Fundação de Amparo à Pesquisa do Estado do Rio de Janeiro of Brazil (FAPERJ) number: E01/200/537/2018
Lysine-based surfactants in nanovesicle formulations: the role of cationic charge position and hydrophobicity in in vitro cytotoxicity and intracellular delivery
Understanding nanomaterial interactions within cells is of increasing importance for assessing their toxicity and cellular transport. Here, we developed nanovesicles containing bioactive cationic lysine-based amphiphiles, and assessed whether these cationic compounds increase the likelihood of intracellular delivery and modulate toxicity. We found different cytotoxic responses among the formulations, depending on surfactant, cell line and endpoint assayed. The induction of mitochondrial dysfunction, oxidative stress and apoptosis were the general mechanisms underlying cytotoxicity. Fluorescence microscopy analysis demonstrated that nanovesicles were internalized by HeLa cells, and evidenced that their ability to release endocytosed materials into cell cytoplasm depends on the structural parameters of amphiphiles. The cationic charge position and hydrophobicity of surfactants determine the nanovesicle interactions within the cell and, thus, the resulting toxicity and intracellular behavior after cell uptake of the nanomaterial. The insights into some toxicity mechanisms of these new nanomaterials contribute to reducing the uncertainty surrounding their potential health hazards
Temperature dependence of plankton community metabolism in the subtropical and tropical oceans
Here we assess the temperature dependence of the metabolic rates (gross primary production
(GPP), community respiration (CR), and the ratio GPP/CR) of oceanic plankton communities. We compile
data from 133 stations of the Malaspina 2010 Expedition, distributed among the subtropical and tropical
Atlantic, Pacific, and Indian oceans. We used the in vitro technique to measured metabolic rates during 24 h
incubations at three different sampled depths: surface, 20%, and 1% of the photosynthetically active
radiation measured at surface. We also measured the % of ultraviolet B radiation (UVB) penetrating at surface
waters. GPP and CR rates increased with warming, albeit different responses were observed for each sampled
depth. The overall GPP/CR ratio declined with warming. Higher activation energies (Ea) were derived for
both processes (GPPChla = 0.97; CRChla = 1.26; CRHPA = 0.95 eV) compared to those previously reported. The
Indian Ocean showed the highest Ea (GPPChla = 1.70; CRChla = 1.48; CRHPA = 0.57 eV), while the Atlantic
Ocean showed the lowest (GPPChla = 0.86; CRChla = 0.77; CRHPA = 0.13 eV). We believe that the difference
between previous assessments and the ones presented here can be explained by the overrepresentation of
Atlantic communities in the previous data sets. We found that UVB radiation also affects the temperature
dependence of surface GPP, which decreased rather than increased under high levels of UVB. Ocean
warming, which causes stratification and oligotrophication of the subtropical and tropical oceans, may lead
to reduced surface GPP as a result of increased penetration of UVB radiation.En prens
The Evolution of Compact Binary Star Systems
We review the formation and evolution of compact binary stars consisting of
white dwarfs (WDs), neutron stars (NSs), and black holes (BHs). Binary NSs and
BHs are thought to be the primary astrophysical sources of gravitational waves
(GWs) within the frequency band of ground-based detectors, while compact
binaries of WDs are important sources of GWs at lower frequencies to be covered
by space interferometers (LISA). Major uncertainties in the current
understanding of properties of NSs and BHs most relevant to the GW studies are
discussed, including the treatment of the natal kicks which compact stellar
remnants acquire during the core collapse of massive stars and the common
envelope phase of binary evolution. We discuss the coalescence rates of binary
NSs and BHs and prospects for their detections, the formation and evolution of
binary WDs and their observational manifestations. Special attention is given
to AM CVn-stars -- compact binaries in which the Roche lobe is filled by
another WD or a low-mass partially degenerate helium-star, as these stars are
thought to be the best LISA verification binary GW sources.Comment: 105 pages, 18 figure
Effects of Multiple Extrusions on Structure-property Performance of Natural Fiber High-density Polyethylene Biocomposites
Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía
La fabricación de materiales compuestos de matriz cerámica reforzados con partículas metálicas han propiciado la formación de nuevos materiales conocidos como compuestos CERMETS, materiales que debido a sus elementos precursores poseen propiedades distintas a las de los materiales convencionales. En este trabajo se establece la ruta de fabricación de materiales compuestos cermets base 3Al2O3*2SiO2 reforzados con partículas metálicas de Ag a partir de la formación de la composición química en peso de polvos de 3Al2O3*2SiO2 / 1% Ag en busca de un aumento en la tenacidad a la fractura con respecto al cerámico base. La composición química de polvos es sometida a un proceso de mezcla molienda de alta energía en seco en un molino tipo planetario por 2 horas a 200 rpm. Los polvos posteriormente son conformados en muestras cilíndricas de 20 mm de diámetro y 3 mm de espesor mediante la aplicación de carga uniaxial en frío de 200 MPa. Las muestras son sinterizadas a 1500°C y 1600°C por una y dos horas en un horno de resistencia eléctrica en atmósfera controlada de gas nitrógeno. Los compuestos fabricados son analizados microestructuralmente por microscopia óptica y electrónica de barrido. Se determina la densidad y las propiedades mecánicas de dureza y tenacidad a la fractura, las dos últimas por el método de indentación. Los resultados muestran la viabilidad de fabricación de materiales compuestos cermets así como los cambios en la densidad, la dureza y la tenacidad a la fractura, con respecto al cerámico 3Al2O3*2SiO2 sin refuerzo metálico
Autoregulation in resistance training : addressing the inconsistencies
Autoregulation is a process that is used to manipulate training based primarily on the measurement of an individual's performance or their perceived capability to perform. Despite being established as a training framework since the 1940s, there has been limited systematic research investigating its broad utility. Instead, researchers have focused on disparate practices that can be considered specific examples of the broader autoregulation training framework. A primary limitation of previous research includes inconsistent use of key terminology (e.g., adaptation, readiness, fatigue, and response) and associated ambiguity of how to implement different autoregulation strategies. Crucially, this ambiguity in terminology and failure to provide a holistic overview of autoregulation limits the synthesis of existing research findings and their dissemination to practitioners working in both performance and health contexts. Therefore, the purpose of the current review was threefold: first, we provide a broad overview of various autoregulation strategies and their development in both research and practice whilst highlighting the inconsistencies in definitions and terminology that currently exist. Second, we present an overarching conceptual framework that can be used to generate operational definitions and contextualise autoregulation within broader training theory. Finally, we show how previous definitions of autoregulation fit within the proposed framework and provide specific examples of how common practices may be viewed, highlighting their individual subtleties
- …