Properties of New York/New Jersey Harbor Sediments

Sediments found in waterways around the world may contain toxic compounds of anthropogeilic origin that can harm the environment and human health. As a result, it is often necessary to remove them and find disposal methods that are environmentally and economically acceptable. Here, we report on results obtained in an experimental program to characterize the nature of the sediment contamination. The objective was to gain a better understanding of the properties of the sediments to develop better methods for understanding the fate and transport of the contaminants and for improving methods for their removal from the sediments. Our investigations made use of x-ray facilities at the Brookhaven National Synchrotron Light Source (NSLS) and the European Synchrotron Radiation Facility (ESRF) at Grenoble, France. The experiments included: measurements of the microstructure of the sediments using computed microtomography, x-ray absorption, and fluorescence microscopy with resolutions as low as 0.2 micrometers to obtain information on the relationships of organic and mineral components of the sediments and on the distribution of contaminants on the surfaces of the sediment grains, investigation of functional groups of chemical compounds using x-ray absorption near-edge spectroscopy (XANES) and Fourier Transform Infrared Spectroscopy (FTIR). Scanning electron microscopy (SEM) and electron probe measurements were made to ascertain the morphology of the sediment surfaces and the distribution of metals on individual sediment grains

Geometric formulation of the uncertainty principle

A geometric approach to formulate the uncertainty principle between quantum observables acting on an N-dimensional Hilbert space is proposed. We consider the fidelity between a density operator associated with a quantum system and a projector associated with an observable, and interpret it as the probability of obtaining the outcome corresponding to that projector. We make use of fidelity-based metrics such as angle, Bures, and root infidelity to propose a measure of uncertainty. The triangle inequality allows us to derive a family of uncertainty relations. In the case of the angle metric, we recover the Landau-Pollak inequality for pure states and show, in a natural way, how to extend it to the case of mixed states in arbitrary dimension. In addition, we derive and compare alternative uncertainty relations when using other known fidelity-based metrics.publishedVersionFil: Bosyk, Gustavo Martín. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Física La Plata; Argentina.Fil: Bosyk, Gustavo Martín. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Departamento de Física; Argentina.Fil: Osán, Tristán Martín. Universidad Nacional de Córdoba. Facultad de Matemática, Astronomía y Física; Argentina.Fil: Osán, Tristán Martín. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Lamberti, Pedro Walter. Universidad Nacional de Córdoba. Facultad de Matemática, Astronomía y Física; Argentina.Fil: Lamberti, Pedro Walter. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina.Fil: Portesi, Mariela. Consejo Nacional de Investigaciones Científicas y Técnicas. Instituto de Física La Plata; Argentina.Fil: Portesi, Mariela. Universidad Nacional de La Plata. Facultad de Ciencias Exactas. Departamento de Física; Argentina.Otras Ciencias Física

An IAEA Multi-technique X-ray Spectrometry End-station at Elettra Sincrotrone Trieste: Benchmarking Results and Interdisciplinary Applications

The International Atomic Energy Agency (IAEA) jointly with the Elettra Sincrotrone Trieste (EST) operates a multipurpose X-ray spectrometry endstation at the X-ray Fluorescence beamline (10.1L). The facility has been available to external users since the beginning of 2015 through the peer-review process of EST. Using this collaboration framework, the IAEA supports and promotes synchrotron-radiation-based research and training activities for various research groups from the IAEA Member States, especially those who have limited previous experience and resources to access a synchrotron radiation facility. This paper aims to provide a broad overview about various analytical capabilities, intrinsic features and performance figures of the IAEA X-ray spectrometry endstation through the measured results. The IAEA-EST endstation works with monochromatic X-rays in the energy range 3.7-14keV for the Elettra storage ring operating at 2.0 or 2.4GeV electron energy. It offers a combination of different advanced analytical probes, e.g. X-ray reflectivity, X-ray absorption fine-structure measurements, grazing-incidence X-ray fluorescence measurements, using different excitation and detection geometries, and thereby supports a comprehensive characterization for different kinds of nanostructured and bulk materials.A broad overview of the various analytical capabilities, intrinsic features and performance figures of the IAEA X-ray spectrometry endstation operated at the X-ray Fluorescence beamline of Elettra Sincrotrone Trieste is given, and different applications are demonstrated to familiarize the user community with the applicable intersdisciplinary research.Fil: Karydas, A.. International Atomic Energy Agency; Austria. National Centre for Scientific Research "Demokritos"; GreciaFil: Czyzycki, M.. International Atomic Energy Agency; Austria. AGH University of Science and Technology. Faculty of Physics and Applied Computer Science ; PoloniaFil: Leani, Juan Jose. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Córdoba. Instituto de Física Enrique Gaviola. Universidad Nacional de Córdoba. Instituto de Física Enrique Gaviola; Argentina. International Atomic Energy Agency; AustriaFil: Migliori, A.. International Atomic Energy Agency; Austria. Nuclear Spectrometry And Appications Lab, Iaea. Onu; AustriaFil: Osán, J.. Hungarian Academy of Sciences Centre for Energy Research; Hungría. International Atomic Energy Agency; AustriaFil: Bogovac, M.. International Atomic Energy Agency; AustriaFil: Wrobel, P.. AGH University of Science and Technology. Faculty of Physics and Applied Computer Science ; PoloniaFil: Vakula, N.. International Atomic Energy Agency; AustriaFil: Padilla Alvarez, R.. International Atomic Energy Agency; AustriaFil: Menk, Ralf Hendrik. Elettra-Sincrotrone Trieste SCpA di Interesse Nazionale; Italia. University of Saskatchewan; CanadáFil: Gol, M. G.. Iranian Light Source Facility; IránFil: Antonelli, M.. Istituto Nazionale di Fisica Nucleare; Italia. Elettra-Sincrotrone Trieste SCpA di Interesse Nazionale; ItaliaFil: Tiwari, M. K.. Raja Ramanna Centre for Advanced Technology; IndiaFil: Caliri, C.. Istituto Nazionale di Fisica Nucleare; ItaliaFil: Vogel Mikuš, K.. Jozef Stefan Institute; Eslovenia. University of Ljubljana; EsloveniaFil: Darby, I.. Elettra-Sincrotrone Trieste SCpA di Interesse Nazionale; Italia. International Atomic Energy Agency; AustriaFil: Kaiser, R.. International Atomic Energy Agency; Austri

Determination of low-<i>Z</i> elements in individual environmental particles using windowless EPMA

The determination of low-Z elements such as carbon, nitrogen, and oxygen in atmospheric aerosol particles is of interest in studying environmental pollution. Conventional electron probe microanalysis technique has a limitation for the determination of the low-Z elements, mainly because the Be window in an energy-dispersive X-ray (EDX) detector hinders the detection of characteristic X-rays from light elements. The feasibility of low-Z element determination in individual particles using a windowless EDX detector is investigated. To develop a method capable of identifying chemical species of individual particles, both the matrix and the geometric effects of particles have to be evaluated. X-rays of low-Z elements generated by an electron beam are so soft that important matrix effects, mostly due to X-ray absorption, exist even within particles in the micrometer size range. Also, the observed radiation, especially that of light elements, experiences different extents of absorption, depending on the shape and size of the particles. Monte Carlo calculation is applied to explain the variation of observed X-ray intensities according to the geometric and chemical compositional variation of individual particles, at different primary electron beam energies. A comparison is carried out between simulated and experimental data, collected for standard individual particles with chemical compositions as generally observed in marine and continental aerosols. Despite the many fundamental problematic analytical factors involved in the observation of X-rays from low-Z elements, the Monte Carlo calculation proves to be quite reliable to evaluate those matrix and geometric effects. Practical aspects of the Monte Carlo calculation for the determination of light elements in individual particles are also considered

Effects of UO3 on the Structure, Thermal and Chemical Stability of Borosilicate Glass Matrix

The glass matrix of composition: 55SiO2-10B2O3-25Na2O-5BaO-5ZrO2 was incorporated with 10 to 40 wt.% of UO3 by melt quenching technique. Neutron diffraction and Reverse Monte Carlo simulations revealed that the borosilicate network consists of SiO4, BO3 and BO4 units; upon adding 10 % UO3 the B-O coordination increases from 3.08 to 3.86 and subsequently decreases with a further in increase in UO3 content. X-ray absorption near edge and Extended X-ray absorption studies revealed that U exist in 5+ and 6+ oxidation states with U-O coordination numbers of 8 and 6 respectively. The thermal stability decreases and weight losses increases with the addition of UO3 in the glass matrix, the sample with 30 wt.% UO3 has thermal stability comparable to that of matrix glass and exhibits lowest dissolution rate in water. Nanoindentation measurements showed that the microstructure of sample with 30 wt.% UO3 is 11% weaker than that of the matrix glass

Glass/Steel/Clay Interactions in a Simulated Radioactive Waste Geological Disposal System

Deep geological storage is the accepted solution for the final disposal of high level radioactive waste therefore, it is necessary to study the host rock of the planned Hungarian waste repository and the materials involved in the engineered barriers. The main goal was to understand the characteristics and stability of the glass/steel/claystone system, from the structural properties of the vitrified waste (borosilicate glasses) to the clay response in the repository. Repository conditions were applied during the experiments to understand the chemical evolution of the system. A triplicate setup was kept at 80°C for 3, 7 and 12 months and post-mortem characterization was performed. No alteration products were observed with scanning electron microscopy energy dispersive X-ray spectroscopy measurements on the surface of the glass and Fe or in the clay after the end of the experimental period. Based on the elemental analysis of the leachates, the released amount of B, K, Si and K increases over time, while that of Ca and Mg decreases. The concentrations of Cl- and SO42- did not change significantly. Ca- and Mg-silicate precipitation was observed by X-ray photoelectron spectroscopy at the surface range of the borosilicate glasses due to the effect of the synthetic porewater treatment