Human cachexia induces changes in mitochondria, autophagy and apoptosis in the skeletal muscle

Cachexia is a wasting syndrome characterized by the continuous loss of skeletal muscle mass due to imbalance between protein synthesis and degradation, which is related with poor prognosis and compromised quality of life. Dysfunctional mitochondria are associated with lower muscle strength and muscle atrophy in cancer patients, yet poorly described in human cachexia. We herein investigated mitochondrial morphology, autophagy and apoptosis in the skeletal muscle of patients with gastrointestinal cancer-associated cachexia (CC), as compared with a weight-stable cancer group (WSC). CC showed prominent weight loss and increased circulating levels of serum C-reactive protein, lower body mass index and decreased circulating hemoglobin, when compared to WSC. Electron microscopy analysis revealed an increase in intermyofibrillar mitochondrial area in CC, as compared to WSC. Relative gene expression of Fission 1, a protein related to mitochondrial fission, was increased in CC, as compared to WSC. LC3 II, autophagy-related (ATG) 5 and 7 essential proteins for autophagosome formation, presented higher content in the cachectic group. Protein levels of phosphorylated p53 (Ser46), activated caspase 8 (Asp384) and 9 (Asp315) were also increased in the skeletal muscle of CC. Overall, our results demonstrate that human cancer-associated cachexia leads to exacerbated muscle-stress response that may culminate in muscle loss, which is in part due to disruption of mitochondrial morphology, dysfunctional autophagy and increased apoptosis. To the best of our knowledge, this is the first report showing quantitative morphological alterations in skeletal muscle mitochondria in cachectic patients

Biomimetics of microducts in three-dimensional bacterial nanocellulose biomaterials for soft tissue regenerative medicine

The demand for solid organs is increasing worldwide, regenerative medicine aims to develop organs that can replace their human counterparts. In this regard, this study describes a novel biomimetic-based methodology for the incorporation of microducts in 3D bacterial nanocellulose (BNC-3D) biomaterials. Although BNC is a biomaterial that has been used as a scaffold for cell culture purposes, it does not have the microduct structure that solid organs required to maintain cell viability. This study aims to biomimicry the microduct structure (blood vessels) in BNC using a corroded porcine kidney in epoxy resin during BNC synthesis. The resin mold was incorporated into the biological process of producing BNC-3D. After the BNC fermentation, the resin was removed using a novel method (acid hydrolysis) to expose the blood vessels constructs. BNC-3D and BNC-3D with microducts (BNC-3DM) were analyzed using electronic microscopy, infrared analysis, thermogravimetric and biological analysis. Results show that biomaterials biomimicry the blood vessels of the reference organ, moreover, the BNC chemical and morphological properties of BNC was not affected in the biomimetic process. Regarding cell behavior, cell viability was not affected by the incorporation of the microducts, and it was proven that viable cells adhere to the microducts surface, reproducing their shape and migrate into the biomaterial up to 245 mu m for 8 days of culture. To conclude, the data demonstrate the potential of biomimetic in BNC for regenerative medicine, in which the microducts transport fluids (blood, nutrients, and waste products) from and to engineered solid organs via animal counterparts. Graphic abstract The graphical abstract represents the structural modification of bacterial nanocellulose (BNC) with the inclusion of microducts and microporosities. Furthermore, it represents the usefulness of the microducts in future applications, where, they can be used for nutrients inlet to feed the cells and to remove the wastes from the developed tissue, same as do the blood vessels. [GRAPHICS]

Prospection and identification of grapevine varieties cultivated in north Portugal and northwest Spain

A broad prospection of grapevine plants was carried out in northwest Spain and north of Portugal during the period from 2002 to 2009. It included zones located in Galicia as well as in the provinces of León, Zamora and Salamanca in Spain and the region delimited by the right side of the Douro river and the spanish border in Portugal. A total of 669 accessions were sampled, studied and identified, both by using the six microsatellite loci included in the OIV descriptors list, plus ampelographic characters. As a result of the study a total of 53 different grapevine varieties were identified. Most of them correspond to minor varieties that are present in the zone. In many cases the same variety was detected in both countries, although denominated with different names that are synonymous. The molecular markers that were analyzed are those included in the OIV 801 to 806 descriptors, and correspond to the following loci: VVS2, VVMD5, VVMD7, VVMD27, ssrVrZAG62 and ssrVrZAG79. Allele sizes of the studied varieties are recorded. Relationships among these varieties seem to be possible. Recommended priority names for the studied varieties both in Spain and in Portugal are listed, in order to avoid misidentifications and reduce the incidence of homonymies.

Light elements in stars with exoplanets

It is well known that stars orbited by giant planets have higher abundances of heavy elements when compared with average field dwarfs. A number of studies have also addressed the possibility that light element abundances are different in these stars. In this paper we will review the present status of these studies. The most significant trends will be discussed.Comment: 10 pages, 6 figures. Submitted to the proceedings of IAU symposium 268: Light elements in the universe

Potential risk of Artemia sp as a transmission vector of lymphocystis disease virus (LCDV)

4 páginas, 1 figura. XI Congreso Nacional de Acuicultura (Vigo, 24-28 septiembre 2007). Ed. Antonio Cerviño Eiroa, Alejandro Guerra Díaz y Carmen Pérez Acosta.[EN] Cysts and naupliis of Artemia sp. were analysed. Specific nested-PCR revealed lymphocystis disease virus (LCDV) genome. Infective viral particle has been observed by CPE development in inoculated cell cultures. Viral genome was found by in situ hybridization in nauplii and adults of natural infected artemia, as in nauplii of bath challenged artemia. No morphological damages have been observed. Artemia is a bio-accumulator of fish pathogens, with a possible role as environmental reservoir of fish pathogens. These results have shown the risk of artemia as a source of viral pathogens to fish larvae.[ES] En el presente trabajo se han realizado estudios virológicos en distintos lotes de quistes comerciales de artemias utilizados como alimento de larvas de peces marinos en piscifactorías. Mediante nested-PCR se ha detectado genoma del virus de linfocistis (LCDV) en homogeneizados de quistes y nauplios de artemia. La existencia de partículas víricas infectivas en estos homogeneizados se ha demostrado mediante la aparición de efectos citopáticos en cultivos celulares. Los ensayos de hibridación in situ han demostrado la existencia del LCDV en artemias infectadas naturalmente, así como en artemias inoculadas mediante baño, sin observarse alteraciones morfológicas. Las artemias actúan por tanto como bioacumuladores, pudiendo desempeñar un papel importante como reservorios ambientales de patógenos de peces. Estos resultados ponen de manifiesto el riesgo potencial de las artemias como fuente de patógenos víricos en estadios larvarios.Irene Cano es contratada postdoctoral en el ICMAN.CSIC dentro del Fondo social europeo- I3P-CSIC, en el marco del proyecto AGL2006-17777-C03-02/ACU (IP: Carmen Sarasquete).Peer reviewe

Relationship between Determinants of Health, Equity, and Dimensions of Health Literacy in Patients with Cardiovascular Disease

Background: Health literacy (HL) has been linked to empowerment, use of health services, and equity. Evaluating HL in people with cardiovascular health problems would facilitate the development of suitable health strategies care and reduce inequity. Aim: To investigate the relationship between different dimensions that make up HL and social determinants in patients with cardiovascular disease. Methods: Observational, descriptive, cross-sectional study in patients with cardiovascular disease, aged 50-85 years, accessing primary care services in Valencia (Spain) in 2018-2019. The Health Literacy Questionnaire was used. Results: 252 patients. Age was significantly related with the ability to participate with healthcare providers (p = 0.043), ability to find information (p = 0.022), and understanding information correctly to know what to do (p = 0.046). Level of education was significant for all HL dimensions. Patients without studies scored lower in all dimensions. The low- versus middle-class social relationship showed significant results in all dimensions. Conclusions: In patients with cardiovascular disease, level of education and social class were social determinants associated with HL scores. Whilst interventions at individual level might address some HL deficits, inequities in access to cardiovascular care and health outcomes would remain unjustly balanced unless structural determinants of HL are taken into account

First complete Providencia rettgeri genome sequence, the NDM-1-producing clinical strain RB151

© 2017 Marquez-Ortiz et al. Providencia rettgeri is an opportunistic bacterial pathogen of clinical significance due to its association with urinary tract infections and multidrug resistance. Here, we report the first complete genome sequence of P. rettgeri. The genome of strain RB151 consists of a 4.8-Mbp chromosome and a 108-kbp blaNDM-1-positive plasmid

Modulated-laser source induction system for remote detection of infrared emissions of high explosives using laser-induced thermal emission

In a homeland security setting, the ability to detect explosives at a distance is a top security priority. Consequently, the development of remote, noncontact detection systems continues to represent a path forward. In this vein, a remote detection system for excitation of infrared emissions using a CO2 laser for generating laser-induced thermal emission (LITE) is a possible solution. However, a LITE system using a CO2 laser has certain limitations, such as the requirement of careful alignment, interference by the CO2 signal during detection, and the power density loss due to the increase of the laser image at the sample plane with the detection distance. A remote chopped-laser induction system for LITE detection using a CO2 laser source coupled to a focusing telescope was built to solve some of these limitations. Samples of fixed surface concentration (500 μg∕cm2) of 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) were used for the remote detection experiments at distances ranging between 4 and 8 m. This system was capable of thermally exciting and capturing the thermal emissions (TEs) at different times in a cyclic manner by a Fourier transform infrared (FTIR) spectrometer coupled to a gold-coated reflection optics telescope (FTIR-GT). This was done using a wheel blocking the capture of TE by the FTIR-GT chopper while heating the sample with the CO2 laser. As the wheel moved, it blocked the CO2 laser and allowed the spectroscopic system to capture the TEs of RDX. Different periods (or frequencies) of wheel spin and FTIR-GT integration times were evaluated to find dependence with observation distance of the maximum intensity detection, minimum signal-to-noise ratio, CO2 laser spot size increase, and the induced temperature incremen

Migration Routes of New World Sanderlings (Calidris alba)

We color-marked Sanderlings (Calidris alba Pallas) at 19 locations in 6 countries in the New World and coordinated a network of volunteers to locate banded individuals in migration over a five-year period. The observers reported 252 independent sightings of birds in countries different from the country of banding. Sanderlings that migrate north to the Arctic from Chile and Peru travel principally through the central corridor (Texas and northward) of the United States and Canada; smaller numbers follow the Pacific coast. A few migrate north from the Pacific coast of South America along the Atlantic coast of the United States. Southbound from the Arctic to coastal Chile and Peru, many individuals switch eastward to stopovers on the Atlantic coast, including birds that migrated north along the U.S. Pacific coast. Sanderlings banded in Brazil during the nonbreeding period appear only on the U.S. Atlantic coast in migration. Our results emphasize the individual nature of migration. We found considerable heterogeneity in migratory behavior among individuals that spend the nonbreeding season together on the same beaches. Individuals from widely separated nonbreeding sites often shared similar pathways. In this species and perhaps in others, no simple single migratory route connects breeding with nonbreeding regions

Optimizing the Compression Stress Relief Process for 7050AL Forgings

Structural components machined from aluminum forgings can exhibit distortion and poor dimensional quality due to residual stresses formed primarily during heat treatment. To alleviate these problems, mechanically stress-relieved tempers are used in which a small amount of plastic strain is introduced after solution heat treatment and prior to aging. For hand-forged billets and die forgings, this strain is introduced by compression. Process specifications for compression stress relief typically allow a range of strains, and this process variability can in turn lead to inconsistent forging performance in machining. In addition, since cold work is known to accelerate the aging response and decrease the peak strength in alloys such as 7050Al, it is important to control the compression stress relief process to achieve the stress relief while maintaining acceptable mechanical properties. The purpose of this investigation was to experimentally characterize the influence of compressive strain on the mechanical properties achieved after subsequent aging treatment in aluminum alloy 7050. We have also used finite element modeling of the residual stress state in a typical forging to predict optimum compression parameters for stress relief