5,895 research outputs found
Aplicación de EOMs y arcillas naturales para la eliminación de MCPD y EG de aceites comestibles
The aim of this study was to investigate the removal of 3-monochloropropane-1,2-diol (3-MCPD) and glycidyl esters (GEs) from edible oils by using Metal Organic Frameworks (MOF) and natural clays. First, the model oil was treated with adsorbents and titanium (IV) butoxide-terephthalate MOF (Ti-MOF) and kaolin were selected as the best performing MOF along with natural clay, respectively, for the removal of 3-MCPD and GEs. The effects of treatment conditions were also investigated, 6.0% adsorbent level, 120 min treatment time and 95 ºC temperature were determined to be the best treatment parameters. Finally, palm oil samples were treated with Ti-MOF and kaolin under the selected conditions and removal of 3-MCPD and GEs was obtained at up to 27% and 58%, respectively. In conclusion, MOFs and natural clays showed good potential for the removal of 3-MCPD and GEs, and the efficiency of the treatment can be improved by modifying the adsorbents.El objetivo de este estudio fue investigar la eliminación de 3-monocloropropano-1,2-diol (3-MCPD) y ésteres de glicidilo (EG) de aceites comestibles mediante el uso de estructuras orgánicas metálicas (EOMs) y arcillas naturales. El aceite modelo se trató en primer lugar con adsorbentes, se seleccionaron titanium (IV) tereftalato de butóxido (Ti-EOM) y caolín como EOM y arcilla natural, respectivamente, para el mejor rendimiento en la eliminación de 3-MCPD y EG. También se investigaron los efectos de las condiciones de tratamiento y se seleccionaron como los mejores parámetros un nivel de adsorbente de 6,0%, un tiempo de tratamiento de 120 min y temperatura de tratamiento de 95ºC. Finalmente, las muestras de aceite de palma se trataron con Ti-EOM y caolín en las condiciones seleccionadas y se obtuvo una eliminación de 3-MCPD y EG de hasta 27% y 58%, respectivamente. En conclusión, los EOMs y las arcillas naturales mostraron un buen potencial para la eliminación de 3-MCPD y EG, y la eficiencia del tratamiento se puede mejorar modificando los adsorbentes
Caracterización integral de las propiedades fisicoquímicas, térmicas, composicionales y sensoriales del aceite de semilla de rosa mosqueta prensado en frío
In this study, cold-pressed rosehip seed oil was fully characterized. Acidity and oxidation levels were near the limit values or slightly exceeded them and improvement in the storage conditions was suggested. The oil started to crystallize at -45.25 °C, and melt at -25.56 °C. Linoleic acid (51.1%), β-sitosterol (84.6%), γ-tocopherol (773.76 µg/g) and rosmarinic acid (31.38 µg/g) were determined as major fatty acid, sterol, tocopherol and phenolic compound, respectively. For the first time, aromatic volatile compounds and sensory descriptive terms were determined for cold-pressed rosehip seed oil. Sixty-seven volatile compounds were detected and L-limonene was found to be a major volatile compound. According to the sensory analysis, timber/kindling and raw vegetable tastes/aromas were found to be relatively dominant. Consequently, it is thought that rosehip seeds can be used as a raw material for edible and nutritionally-rich cold-pressed oil production and/or as source oil for functional food preparations.En este estudio se caracterizó completamente el aceite de semilla de rosa mosqueta prensado en frío. Los niveles de acidez y oxidación estaban cerca de los valores límite o los excedían ligeramente y se sugirió mejorar las condiciones de almacenamiento. El aceite comenzó a cristalizar a -45,25°C y a fundirse a -25,56°C. Se determinó el ácido linoleico (51,1%), β-sitosterol (84,6%), γ-tocoferol (773,76 µg/g) y ácido rosmarínico (31,38 µg/g) como principal ácido graso, esterol, tocoferol y compuesto fenólico, respectivamente. Por primera vez, se determinaron compuestos aromáticos volátiles y términos descriptivos sensoriales para el aceite de semilla de rosa mosqueta prensado en frío. Se detectaron sesenta y siete compuestos volátiles y se descubrió que el L-limoneno era un compuesto volátil importante. Según el análisis sensorial, se encontró que los sabores/aromas de madera/astillas y vegetales crudos eran relativamente dominantes. En consecuencia, se cree que las semillas de rosa mosqueta pueden usarse como materia prima para la producción de aceite prensado en frío comestible y nutritivo y/o como aceite fuente para preparaciones de alimentos funcionales
Recommended from our members
Rational Design of Pore Size and Functionality in a Series of Isoreticular Zwitterionic Metal-Organic Frameworks
The isoreticular expansion and functionalization of charged-polarized porosity has been systematically explored by the rational design of 11 isostructural zwitterionic metal-organic frameworks (ZW-MOFs). This extended series of general structural composition {[M3F(L1)3(L2)1.5]·guests}n was prepared by employing the solvothermal reaction of Co and Ni tetrafluoroborates with a binary ligand system composed of zwitterionic pyridinium derivatives and traditional functionalized ditopic carboxylate auxiliary ligands (HL1·Cl = 1-(4-carboxyphenyl)-4,4′-bipyridinium chloride, Hcpb·Cl; or 1-(4-carboxyphenyl-3-hydroxyphenyl)-4,4′-bipyridinium chloride, Hchpb·Cl; and H2L2 = benzene-1,4-dicarboxylic acid, H2bdc; 2-aminobenzene-1,4-dicarboxylic acid, H2abdc; 2,5-dihydroxy-1,4-benzenedicarboxylic acid, H2dhbdc; biphenyl-4,4′-dicarboxylic acid, H2bpdc; or stilbene-4,4′-dicarboxylic acid, H2sdc). Single-crystal structure analyses revealed cubic crystal symmetry (I-43m, a = 31-36 Å) with a 3D pore system of significant void space (73-81%). The pore system features three types of pores being systematically tunable in size ranging from 17.4 to 18.8 Å (pore I), 8.2 to 12.8 Å (pore II), and 4.8 to 10.4 Å (pore III) by the choice of auxiliary ligands. All members of this series have noninterpenetrating structures and exhibit robust architectures, as evidenced by their permanent porosity and high thermal stability (up to 300 °C). The structural integrity and specific surface areas could be systematically optimized using supercritical CO2 exchange methods for framework activation resulting in BET surface areas ranging from 1250 to 2250 m2/g. Most interestingly, as a structural landmark, we found the pore surfaces lined with charge gradients employed by the pyridinium ligands. This key feature results in significant adsorption of carbon dioxide and methane which is attributed to polarization effects. With this contribution we pioneer the reticulation of pyridinium building blocks into extended zwitterionic networks in which specific properties can be targeted
Data and evidence challenges facing place-based policing
PURPOSE: The purpose of this paper is to use an evaluation of a micro-place-based hot-spot policing implementation to highlight the potential issues raised by data quality standards in the recording and measurement of crime data and police officer movements. DESIGN/METHODOLOGY/APPROACH: The study focusses on an area of London (UK) which used a predictive algorithm to designate micro-place patrol zones for each police shift over a two-month period. Police officer movements are measured using GPS data from officer-worn radios. Descriptive statistics regarding the crime data commonly used to evaluate this type of implementation are presented, and simple analyses are presented to examine the effects of officer patrol duration (dosage) on crime in micro-place hot-spots. FINDINGS: The results suggest that patrols of 10-20 minutes in a given police shift have a significant impact on reducing crime; however, patrols of less than about 10 minutes and more than about 20 minutes are ineffective at deterring crime. RESEARCH LIMITATIONS/IMPLICATIONS: Due to the sparseness of officer GPS data, their paths have to be interpolated which could introduce error to the estimated patrol dosages. Similarly, errors and uncertainty in recorded crime data could have substantial impact on the designation of micro-place interventions and evaluations of their effectiveness. ORIGINALITY/VALUE: This study is one of the first to use officer GPS data to estimate patrol dosage and places particular emphasis on the issue of data quality when evaluating micro-place interventions
Synthesis and NMR Elucidation of Novel Pentacycloundecane-Derived Peptides
Herein we report the synthesis and NMR elucidation of five novel pentacycloundecane (PCU)-derived short peptides as potential HIV protease inhibitors. 1H and 13C spectral analysis show major overlapping of methine resonance of the PCU ‘cage’ thereby making it extremely difficult to assign the NMR signals. Attachment of short peptides to the cage at position C-8/C-11 results in conformational differences of the peptide side chains due to diastereomeric interactions between the cage skeleton and the chiral side chains. The use of two-dimensional NMR techniques proved to be highly effective in the elucidation of such systems.Keywords: 1H NMR, 13C NMR, 2D NMR, PCU diol diaminoacid, HIV protease inhibitors PDF and supplementary file attached
Making a case for community screening services: findings from a medical outreach in Ibadan, Nigeria
Background: Currently, population based medical check up is yet to be explored as a veritable tool for assessing the burden of on-communicable diseases in Nigeria. Objectives: This study aimed to assess the prevalence of selected lifestyle related diseases during a free medical rally in an urban community. Methods: General medical examinations of all participants at a free medical rally in a middle class community in Ibadan, Oyo State was conducted. Body Mass Index (BMI), blood pressure and random blood sugar measurements were done using standardised instruments. BMI classification for children was done using the CDC guidelines for males and females aged 2-20 years. Results: Of the 302 participants examined, 33.1% were males and 32.1% were less than 18 years. Of those aged 2 to 20 years, 22.9% were underweight, while 5.2% were overweight/ obese. In adults 3.6% were underweight and 43.2% were overweight/ obese. Adults were significantly more likely to be overweight/obese (P<0.001). Prevalence of high blood pressure was 29.3% and 9.4% of adults had elevated random blood glucose levels. A higher proportion of obese people (P=0.259), males (P= 0.327) and those older than 40 years (P<0.001) had elevated blood pressure. A weak correlation (spearman rho= 0.3) was found between blood pressure and BMI (P<0.001) and also between BMI and blood sugar level (spearman rho= 0.2) P=0.05. Conclusion: There is a need for greater emphasis on community based screening programmes to aid early diagnosis and treatment of non communicable diseases in the country
Thermal modeling of a Ni-H2 battery cell
The nickel-hydrogen secondary battery has many desirable features which make it attractive for satellite power systems. It can provide a significant improvement over the energy density of present spacecraft nickel-cadnium batteries, combined with longer life, tolerance to overcharge and possibility of state-of-charge indication. However, to realize these advantages, accurate thermal modeling of nickel-hydrogen cells is required in order to properly design the battery pack so that it operates within a specified temperature range during the operation. Maintenance of a low operating temperature and a uniform temperature profile within the cell will yield better reliability, improved cycle life and better charge/discharge efficiencies. This research has the objective of developing and testing a thermal model which can be used to characterize battery operation. Primarily, temperature distribution with the heat generation rates as a function of position and time will be evaluated for a Ni-H2 cell in the three operating modes: (1) charge cycle, (2) discharge cycle, and (3) overcharge condition, if applicable. Variables to be examined include charging current, discharge rates, state of charge, pressure and temperature. Once the thermal model has been developed, this resulting model will predict the actual operating temperature and temperature gradient for the specific cell geometry to be used
Nosocomial hepatitis C virus infection in a renal transplantation center
AbstractNosocomial hepatitis C virus (HCV) infections were recorded in the renal transplantation unit of the university hospital. There were cases of acute HCV infection with aggressive clinical courses diagnosed from a positive HCV RNA test in the early post-transplantation period and which remained anti-HCV negative. Their anti-HCV seronegativity was attributed to them having acquired HCV under intense immunosuppressive therapy and suggested that the aggressive clinical course could be due to the deficient immune response resulting in an inability to limit viral replication. There were also donors diagnosed as having acute HCV infection in the early post-operative period. Genotyping and sequence analysis for HCV were performed on the isolates of eight of these patients who were consecutively transplanted and of three donors whose recipients were infected with HCV prior to transplantation, and who acquired acute HCV infection after transplantation. Of the eight recipients in the first group three were genotype 1a, three were genotype 1b, one wasgenotype 3a, and the last one was genotype 4 according to Simmond's classification. Of the three donor-recipient couples both the HCV isolates from one couple were genotyped as 1b and the phylogenetic analysis indicated that the patients were infected with a common variant of HCV, but the genotypesof HCV isolates from the other couples were different. Recipients were genotype 1b and the donors were genotype 1a in these couples. Genotype results of the first group and donor-recipient couples, and sequence analysis of genotype 1b and 1a isolates, showed that the source of infection was not a unique strain and there were multiple breaks in universal precautions while managing these patients
- …