Assembly and Characterization of SAMs Formed by the Adsorption of Alkanethiols on Zinc Selenide Substrates

Alkanethiols HS(CH2)nCH3 (n = 7, 11, 15, 17) and the hydroxy functional thiol HS(CH2)12OH are shown to adsorb from solution onto zinc selenide crystals and form well-organized monolayers. The chemisorption of these organosulfur compounds has been studied using transmission Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and surface wetting properties. FTIR indicates that the longer chain alkanethiols (n = 15, 17) form well-defined SAMs with crystalline-like conformations of the chains within the monolayers. As the chain length decreases, there is less conformational order present in the monolayers. The orientation of the largely trans-zigzag alkyl chains on the surface is at a slight tilt off the surface normal direction, as indicated by the dichroism of the infrared spectra and the chain-length-dependent scaling of the mass coverage of the SAM. The structural data obtained by XPS and FTIR are compatible with the inferences derived from measurements of surface wetting properties. The thickness of the SAM layers calculated using XPS is found to be comparable to the thickness of alkanethiol SAMs formed on gold and other metal surfaces. Changes in the surface of the ZnSe crystal because of chemisorption of the thiols are illustrated by data from AFM imaging. The feasibility of forming cohesive patterned monolayers by microcontact printing is also demonstrated

Effects of Surface Morphology on the Anchoring and Electrooptical Dynamics of Confined Nanoscale Liquid Crystalline Films

The orientation and dynamics of two 40-nm thick films of 4-n-pentyl-4‘-cyanobiphenyl (5CB), a nematic liquid crystal, have been studied using step-scan Fourier transform infrared spectroscopy (FTIR). The films are confined in nanocavities bounded by an interdigitated electrode array (IDA) patterned on a zinc selenide (ZnSe) substrate. The effects of the ZnSe surface morphology (specifically, two variations of nanometer-scale corrugations obtained by mechanical polishing) on the initial ordering and reorientation dynamics of the electric-field-induced Freedericksz transition are presented here. The interaction of the 5CB with ZnSe surfaces bearing a spicular corrugation induces a homeotropic (surface normal) alignment of the film confined in the cavity. Alternately, when ZnSe is polished to generate fine grooves along the surface, a planar alignment is promoted in the liquid crystalline film. Time-resolved FTIR studies that enable the direct measurement of the rate constants for the electric-field-induced orientation and thermal relaxation reveal that the dynamic transitions of the two film structures are significantly different. These measurements quantitatively demonstrate the strong effects of surface morphology on the anchoring, order, and dynamics of liquid crystalline thin films

Surface Effects on the Dynamics of Liquid Crystalline Thin Films Confined in Nanoscale Cavities

The dynamics of 4-n-pentyl-4\u27-cyanobiphenyl (5CB) nematic liquid crystalline thin films have been studied in real time using step-scan Fourier transform infrared spectroscopy (FTIR). In these studies, the liquid crystal was confined in a nanocavity defined and bounded by an interdigitated gold electrode array. The gold microstructures were microfabricated on a zinc selenide (IR-transparent) window. The 5CB interactions with the ZnSe substrate result in surface-induced ordering of the ultrathin layers (on the order of 40 nm). As the films increase in thickness, the nanoscale organization induced by the surface layer becomes a less significant contributor to the overall bulk structure of the sample. Time-resolved FTIR studies have enabled the measurement of rate constants for the orientation and relaxation of the thin films under an applied electric field as a direct function of confinement dimensions. Cell thicknesses ranging from 40 to 300 nm were studied. The measured rate behaviors demonstrate the strong effects of the interactions occurring between the surfaces of the ZnSe crystals and the 5CB on the dynamics of the liquid crystalline assembly. Time-resolved studies reveal kinetically inhomogeneous line shapes for thicker films while ultrathin films maintain kinetically homogeneous peaks, suggesting the development of liquid crystalline domains or other inhomogeneities over this length scale in the transition from the surface layer to bulk

Autonomous Light Management in Flexible Photoelectrochromic Films Integrating High Performance Silicon Solar Microcells

Commercial smart window technologies for dynamic light and heat management in building and automotive environments traditionally rely on electrochromic (EC) materials powered by an external source. This design complicates building-scale installation requirements and substantially increases costs for applications in retrofit construction. Self-powered photoelectrochromic (PEC) windows are an intuitive alternative wherein a photovoltaic (PV) material is used to power the electrochromic device, which modulates the transmission of the incident solar flux. The PV component in this application must be sufficiently transparent and produce enough power to efficiently modulate the EC device transmission. Here, we propose Si solar microcells (μ-cells) that are i) small enough to be visually transparent to the eye, and ii) thin enough to enable flexible PEC devices. Visual transparency is achieved when Si μ-cells are arranged in high pitch (i.e. low-integration density) form factors while maintaining the advantages of a single-crystalline PV material (i.e., long lifetime and high performance). Additionally, the thin dimensions of these Si μ-cells enable fabrication on flexible substrates to realize these flexible PEC devices. The current work demonstrates this concept using WO₃ as the EC material and V₂O₅ as the ion storage layer, where each component is fabricated via sol-gel methods that afford improved prospects for scalability and tunability in comparison to thermal evaporation methods. The EC devices display fast switching times, as low as 8 seconds, with a modulation in transmission as high as 33%. Integration with two Si μ-cells in series (affording a 1.12 V output) demonstrates an integrated PEC module design with switching times of less than 3 minutes, and a modulation in transmission of 32% with an unprecedented EC:PV areal ratio

Micro-optical Tandem Luminescent Solar Concentrators

Traditional concentrating photovoltaic (CPV) systems utilize multijunction cells to minimize thermalization losses, but cannot efficiently capture diffuse sunlight, which contributes to a high levelized cost of energy (LCOE) and limits their use to geographical regions with high direct sunlight insolation. Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a light-trapping waveguide to concentrate light onto smaller cells. LSCs can absorb both direct and diffuse sunlight, and thus can operate as flat plate receivers at a fixed tilt and with a conventional module form factor. However, current LSCs experience significant power loss through parasitic luminophore absorption and incomplete light trapping by the optical waveguide. Here we introduce a tandem LSC device architecture that overcomes both of these limitations, consisting of a PLMA polymer layer with embedded CdSe/CdS quantum dot (QD) luminophores and InGaP micro-cells, which serve as a high bandgap absorber on top of a conventional Si photovoltaic. We experimentally synthesize CdSe/CdS QDs with exceptionally high quantum-yield (99%) and ultra-narrowband emission optimally matched to fabricated III-V InGaP micro-cells. Using a Monte Carlo ray-tracing model, we show the radiative limit power conversion efficiency for a module with these components to be 30.8% diffuse sunlight conditions. These results indicate that a tandem LSC-on-Si architecture could significantly improve upon the efficiency of a conventional Si photovoltaic module with simple and straightforward alterations of the module lamination steps of a Si photovoltaic manufacturing process, with promise for widespread module deployment across diverse geographical regions and energy markets

The Reactivity and Structural Dynamics of Supported Metal Nanoclusters Using Electron Microscopy, in situ X-Ray Spectroscopy, Electronic Structure Theories, and Molecular Dynamics Simulations.

The distinguishing feature of our collaborative program of study is the focus it brings to emergent phenomena originating from the unique structural/electronic environments found in nanoscale materials. We exploit and develop frontier methods of atomic-scale materials characterization based on electron microscopy (Yang) and synchrotron X-ray absorption spectroscopy (Frenkel) that are in turn coupled innately with advanced first principles theory and methods of computational modeling (Johnson). In the past year we have made significant experimental advances that have led to important new understandings of the structural dynamics of what are unquestionably the most important classes of heterogeneous catalysts—the materials used to both produce and mitigate the consequences of the use of liquid hydrocarbon fuels

Autonomous Light Management in Flexible Photoelectrochromic Films Integrating High Performance Silicon Solar Microcells

Commercial smart window technologies for dynamic light and heat management in building and automotive environments traditionally rely on electrochromic (EC) materials powered by an external source. This design complicates building-scale installation requirements and substantially increases costs for applications in retrofit construction. Self-powered photoelectrochromic (PEC) windows are an intuitive alternative wherein a photovoltaic (PV) material is used to power the electrochromic device, which modulates the transmission of the incident solar flux. The PV component in this application must be sufficiently transparent and produce enough power to efficiently modulate the EC device transmission. Here, we propose Si solar microcells (μ-cells) that are i) small enough to be visually transparent to the eye, and ii) thin enough to enable flexible PEC devices. Visual transparency is achieved when Si μ-cells are arranged in high pitch (i.e. low-integration density) form factors while maintaining the advantages of a single-crystalline PV material (i.e., long lifetime and high performance). Additionally, the thin dimensions of these Si μ-cells enable fabrication on flexible substrates to realize these flexible PEC devices. The current work demonstrates this concept using WO₃ as the EC material and V₂O₅ as the ion storage layer, where each component is fabricated via sol-gel methods that afford improved prospects for scalability and tunability in comparison to thermal evaporation methods. The EC devices display fast switching times, as low as 8 seconds, with a modulation in transmission as high as 33%. Integration with two Si μ-cells in series (affording a 1.12 V output) demonstrates an integrated PEC module design with switching times of less than 3 minutes, and a modulation in transmission of 32% with an unprecedented EC:PV areal ratio

Metal Core Bonding Motifs of Monodisperse Icosahedral Au13 and Larger Au Monolayer-Protected Clusters As Revealed by X-ray Absorption Spectroscopy and Transmission Electron Microscopy

The atomic metal core structures of the subnanometer clusters Au13[PPh3]4[S(CH2)11CH3]2Cl2 (1) and Au13[PPh3]4[S(CH2)11CH3]4 (2) were characterized using advanced methods of electron microscopy and X-ray absorption spectroscopy. The number of gold atoms in the cores of these two clusters was determined quantitatively using high-angle annular dark field scanning transmission electron microscopy. Multiple-scattering-path analyses of extended X-ray absorption fine structure (EXAFS) spectra suggest that the Au metal cores of each of these complexes adopt an icosahedral structure with a relaxation of the icosahedral strain. Data from microscopy and spectroscopy studies extended to larger thiolate-protected gold clusters showing a broader distribution in nanoparticle core sizes (183 ± 116 Au atoms) reveal a bulklike fcc structure. These results further support a model for the monolayer-protected clusters (MPCs) in which the thiolate ligands bond preferentially at 3-fold atomic sites on the nanoparticle surface, establishing an average composition for the MPC of Au180[S(CH2)11CH3]40. Results from EXAFS measurements of a gold(I) dodecanethiolate polymer are presented that offer an alternative explanation for observations in previous reports that were interpreted as indicating Au MPC structures consisting of a Au core, Au2S shell, and thiolate monolayer

Design Criteria for Micro-Optical Tandem Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) harness light generated by luminophores embedded in a light-trapping waveguide to concentrate onto smaller cells. LSCs can absorb both direct and diffuse sunlight, and thus can operate as flat plate receivers at a fixed tilt and with a conventional module form factor. However, current LSCs experience significant power loss through parasitic luminophore absorption and incomplete light trapping by the optical waveguide. Here, we introduce a tandem LSC device architecture that overcomes both of these limitations, consisting of a poly(lauryl methacrylate) polymer layer with embedded cadmium selenide core, cadmium sulfide shell (CdSe/CdS) quantum dot (QD) luminophores and an InGaP microcell array, which serves as high bandgap absorbers on the top of a conventional Si photovoltaic. We investigate the design space for a tandem LSC, using experimentally measured performance parameters for key components, including the InGaP microcell array, CdSe/CdS QDs, and spectrally selective waveguide filters. Using a Monte Carlo ray-tracing model, we compute the power conversion efficiency for a tandem LSC module with these components to be 29.4% under partially diffuse illumination conditions. These results indicate that a tandem LSC-on-Si architecture could significantly improve upon the efficiency of a conventional Si photovoltaic cell