27 research outputs found

    Electrolytic Hydrogen Production From Renewable Source, Storage and Reconversion in Fuel Cells: The System of the “Mediterranea” University of Reggio Calabria

    Get PDF
    AbstractNowadays a redesign of cities, amid the others from an energetic point of view, is taking place. It increasingly addresses the smart city model, an organic system in which infrastructures, services and technology are organized in order to achieve friendly and livable cities, combining in a single urban model environment protection, energy efficiency and economic sustainability.In smart cities buildings are nZEB and equipped with domotics applications, energy grids are smart, transports are electric, lighting is high-efficiency, hydrogen is used for energy storage, ecc. As concerns this latter, in the last periods hydrogen has increasingly shown to be particularly fit as an energetic carrier, being not pollutant, versatile, allowing production at all scales and, compared to electric battery, not requiring time consuming recharging. Anyway, due to the present relevant starting funds of its technology, its quick, effective penetration into the market still requires the necessary economic breakthroughs.Within this frame, in the paper a system aimed at hydrogen production through electrolysis from renewable source (provided by both PV and wind generators), its storage and reconversion in fuel cells is presented. The system is installed at the Mediterranea University of Reggio Calabria. Particularly, in the paper the global process taking place in the system is described, evaluating the hourly hydrogen stored amount, the power autonomy provided and the global efficiency of the process

    A Case-Study Plant for a Sustainable Redevelopment of Buildings Based on Storage and Reconversion of Hydrogen Generated by Using Solar Energy

    Get PDF
    In todays process of decarbonisation and transition to a green economy based on distributed and sustainable energy production, hydrogen is considered the most promising energy carrier, thanks to its multiple properties. It is clean, versatile and has a high combustion efficiency and more importantly, renewable energy could be used as a primary source for hydrogen production near the end use point, making full use of local energy potential. Nevertheless, the current cost of its technology still requires further research and development, necessary to obtain its rapid and effective launch onto the market. Moreover, hydrogen storage and distribution infrastructures, fundamental to make it usable and competitive, are currently lacking.In this framework, the paper analyses a photovoltaic (PV) system, equipped with hydrogen storage and reconversion subsystems. The technological plant is basically aimed to be easily integrated into buildings for their sustainable redevelopment. At this stage, the presented case study was designed to supply a part of electrical needs of the Mediterranea University of Reggio Calabria.In brief, starting from the PV generation of electricity, hydrogen is obtained through electrolytic production, which is stored and then reconverted into electricity by using fuel cells. The study clearly meets the main goals of the 2030 Agenda for sustainable development. Un caso studio di impianto per la riqualificazione sostenibile degli edifici basato sullo stoccaggio e sulla riconversione dell’idrogeno prodotto usando l’energia solareNell'odierno processo di decarbonizzazione e transizione verso un'economia verde basata sulla produzione di energia distribuita e sostenibile, l'idrogeno è considerato il vettore energetico più promettente, grazie alle sue molteplici proprietà: è pulito, versatile e ha un'alta efficienza di combustione. In particolare, l'energia rinnovabile potrebbe essere utilizzata come fonte primaria per la produzione di idrogeno vicino al punto di utilizzo finale, sfruttando appieno il potenziale energetico locale. Tuttavia, l'attuale costo della sua tecnologia richiede ancora ulteriori ricerche e sviluppi, necessari per ottenere la sua rapida ed efficace penetrazione nel mercato. Inoltre, al momento le infrastrutture di stoccaggio e distribuzione dell'idrogeno, fondamentali per renderlo utilizzabile e competitive, sono ancora lacunose.In questo scenario, il lavoro analizza un sistema fotovoltaico (PV), dotato di sottosistemi di stoccaggio e riconversione dell'idrogeno. L'impianto tecnologico è pensato per essere facilmente integrato negli edifici per una loro riqualificazione sostenibile; in questa fase, il caso di studio testato era finalizzato alla alimentazione di una parte delle utenze elettriche dell'Università Mediterranea di Reggio Calabria. In breve, a partire dalla generazione fotovoltaica di elettricità, l'idrogeno viene ottenuto attraverso la produzione elettrolitica, immagazzinato e poi riconvertito in elettricità utilizzando le celle a combustibile. Lo studio è chiaramente in linea con i principali obiettivi dell'Agenda 2030 per uno sviluppo sostenibile.In todays process of decarbonisation and transition to a green economy based on distributed and sustainable energy production, hydrogen is considered the most promising energy carrier, thanks to its multiple properties. It is clean, versatile and has a high combustion efficiency and more importantly, renewable energy could be used as a primary source for hydrogen production near the end use point, making full use of local energy potential. Nevertheless, the current cost of its technology still requires further research and development, necessary to obtain its rapid and effective launch onto the market. Moreover, hydrogen storage and distribution infrastructures, fundamental to make it usable and competitive, are currently lacking.In this framework, the paper analyses a photovoltaic (PV) system, equipped with hydrogen storage and reconversion subsystems. The technological plant is basically aimed to be easily integrated into buildings for their sustainable redevelopment. At this stage, the presented case study was designed to supply a part of electrical needs of the Mediterranea University of Reggio Calabria.In brief, starting from the PV generation of electricity, hydrogen is obtained through electrolytic production, which is stored and then reconverted into electricity by using fuel cells. The study clearly meets the main goals of the 2030 Agenda for sustainable development. Un caso studio di impianto per la riqualificazione sostenibile degli edifici basato sullo stoccaggio e sulla riconversione dell’idrogeno prodotto usando l’energia solareNell'odierno processo di decarbonizzazione e transizione verso un'economia verde basata sulla produzione di energia distribuita e sostenibile, l'idrogeno è considerato il vettore energetico più promettente, grazie alle sue molteplici proprietà: è pulito, versatile e ha un'alta efficienza di combustione. In particolare, l'energia rinnovabile potrebbe essere utilizzata come fonte primaria per la produzione di idrogeno vicino al punto di utilizzo finale, sfruttando appieno il potenziale energetico locale. Tuttavia, l'attuale costo della sua tecnologia richiede ancora ulteriori ricerche e sviluppi, necessari per ottenere la sua rapida ed efficace penetrazione nel mercato. Inoltre, al momento le infrastrutture di stoccaggio e distribuzione dell'idrogeno, fondamentali per renderlo utilizzabile e competitive, sono ancora lacunose.In questo scenario, il lavoro analizza un sistema fotovoltaico (PV), dotato di sottosistemi di stoccaggio e riconversione dell'idrogeno. L'impianto tecnologico è pensato per essere facilmente integrato negli edifici per una loro riqualificazione sostenibile; in questa fase, il caso di studio testato era finalizzato alla alimentazione di una parte delle utenze elettriche dell'Università Mediterranea di Reggio Calabria. In breve, a partire dalla generazione fotovoltaica di elettricità, l'idrogeno viene ottenuto attraverso la produzione elettrolitica, immagazzinato e poi riconvertito in elettricità utilizzando le celle a combustibile. Lo studio è chiaramente in linea con i principali obiettivi dell'Agenda 2030 per uno sviluppo sostenibile

    Pursuing softer urban mobility behaviors through game-based apps

    Get PDF
    Cities are currently engaged through their urban policies in pushing people towards less environmentally impacting mobility modalities: therefore, cycling and walking are strongly promoted, especially by means of new and wider limited traffic and no-cars zones. In this paper, the effectiveness of the new smartphones and appsbased technologies in modifying the mobility behaviors of citizens towards more sustainable choices has been investigated. Specifically, the potential of a smartphone app, directly involving citizens by means of a game rewarding the most sustainable trips, has been tested on a university commuters' group. These latter, starting from their current mobility situation, were challenged by an enhanced scenario characterized by more restrictive and sustainable targets. Promising results have been obtained suggesting that game–based tools could be effectively used as urban policy interventions intended to obtain a more sustainable mobilit

    DISTRETTI ENERGETICI: UNO STUDIO SU UN QUARTIERE DI UNA CITTÀ DELL’ITALIA MERIDIONALE

    Get PDF
    Nowadays the energy transition, which implies the design of a new energy supply and distribution model based on RES, is an urgent course of action. Not only is it crucial to tackle climate change issues but it is also an opportunity to generate new technical, economic and social development possibilities. In this framework, the implementation of new structures of collective and collaborative economy, such as energy districts and communities, is encouraged by the European Union's development programs as a crucial strategy to mitigate both climate change crisis and economic inequalities as well as socio-environmental injustices. With a view to providing a contribution to the studies addressing the effectiveness of these new energy management structures, especially in Mediterranean climates, this work proposes an analysis focused on a neighborhood of a city located in the Southern Italy. The results showed that the implementation of RES in an energy district perspective, according to the feasibility granted by the neighborhood features, allowed the balance between energy productivity and needs to be reached

    Two operative risk indicators as tools for negotiating contracts between curators of Museums and HVAC technical services providers

    Get PDF
    The purpose of Heating, Ventilating and Air-Conditioning (HVAC) systems in museums is to properlycontrol important microclimate parameters; such systems, in fact, apart from ensuring the visitors’ well-being, are requested to guarantee suitable indoor conditions for the proper conservation of the importantcultural goods hosted by museums. Hence, in case of disservice, or interruption due to maintenance inter-ventions, it is important to quantify the economic damage induced to exhibited and/or stored works ofart (or even to the building museum itself). Accordingly, it is essential to guarantee the shortest possibleperiod of disservice during which probable damages for the works of art could occur. Since curators arethe most relevant subjects committed to properly run the museum, also for what concerns the indoorenvironmental conditions, the aim of this work is to propose two new comprehensive operative damagerisk indicators to support curators in negotiating the stipulation of contracts with the external companiesin charge of the management of the HVAC system, in order to preserve the works of art. Particularly, theseindicators try to integrate, into the contracts, economic considerations related to the system’s disserviceperiod and/or planned interruptions. The feasibility of the proposed new indicators has been checked bymeans of an example application involving the “Museo Regionale” of Palermo (Italy)

    Modelling Indoor Radiative Heath Exchanges for Effective People Thermal Comfort and HVAC Design.

    No full text
    Radiative heat exchanges inside buildings are responsible of a relevant part of the thermal balance of people occupying such confined spaces and, in turn, of their thermal comfort sensations. Mean radiant temperature of the internal surfaces is supposed to affect considerably this balance but, usually, it is computed by means of too simplified relationships that significantly affect the comfort evaluations. These simplified approaches can be also accountable of a less effective design of HVAC systems. Unfortunately, an accurate evaluation of the mean radiant temperature, especially when high intensity sources are present in a given internal space, depends on the angle factors between human subjects and surrounding surfaces of the enclosure. Angle factors, on the other hand, are a direct function of the projected area factors. Presently, there is still a certain lack in the availability of simple and reliable methods capable of computing angle factors of people in assigned postures, particularly for buildings characterized by a complex geometry. On the base of experimental results, obtained by means of a photographic apparatus on purpose designed, a comprehensive algorithm is presented for assessing angle factors of people living or working in confined spaces, where heat high intensity sources are present, and sun among them. The algorithm, that is applicable to people in seated or standing postures, apart a more accurate evaluation of the indoor thermal comfort of people, allows a more effective design of heating, ventilating and air conditioning mechanical systems

    Greenhouse Gas Balance in the City of Reggio Calabria and Assessment of the Effects of Measures of Emission Reduction and Absorption

    No full text
    Climate change and its ascertained attribution to anthropic activity need to be tackled with extreme urgency and must not be postponed. The need to reduce greenhouse gas emissions require a change in the energy paradigm, mainly affecting the construction and mobility sectors. Countries need to move towards climate neutrality with a widespread adoption of innovative models, systems, and technologies, reducing dependence on non-renewable sources and increasing energy efficiency. Measures to be adopted to achieve the prefixed decarbonization targets should involve, in addition to central governments, local communities. In this paper, in order to contribute to the definition of mitigation measures by the local administration, the balance of emissions and removal of greenhouse gases, assessed following the IPCC guidelines, for an Italian city (Reggio Calabria) on the date of 1 January 2020 is presented. Several hypotheses concerning reduction measures to be applied to the building and transport sectors, together with absorption interventions, have been developed and we have analyzed the effectiveness of each of them and their global effects on 1 January 2030. The proposed measures allow a reduction of 17% of total emissions, indicating that to reach carbon neutrality in 2050, more incisive and wide range interventions are required

    Passive components for reducing environmental impacts of buildings:analysis of an experimental green roof

    No full text
    The reduction of the environmental impacts related to the building sector is a matter of outmost importance concerning the sustainable utilization of resources related to human activities. Such sector is in fact responsible for about 40% of both release of pollutants in the atmosphere and energy consumption. When trying to reduce buildings’ environmental impacts, as well as to limit their energy consumption, building envelope passive systems can be used. Amongst these, green roofs have been gaining global attention due to their benefits in terms of resilience and sustainability, in order to mitigate the unfavourable urbanization effects. Research on the green roof has been indeed increasingly raising in recent years. Although the subject of green roofs has been dealt with extensively from many different points of view, there are currently some limits on which improvements can be made. In particular, the aim of the present work is to consider a somewhat overlooked aspect regarding green roofs, which is the overall energyenvironmental impact of such building component. The present work reports the results of a case study conducted on a Sicilian building sited in the Department of Engineering of the University of Palermo, where the Life Cycle Assessment (LCA) methodology has been applied

    A generalized model of human body radiative heat exchanges for optimal design of indoor thermal comfort conditions

    No full text
    Human thermal sensation depends heavily on radiative exchanges between the human body and the surrounding environment. Because these exchanges play a crucial role in the thermal balance of the human body, about 35% of the process, human thermal sensation should draw the attention of planners when designing both indoor environments and equipment. The present study aims to contribute to this field by proposing a procedure for delineating the optimal comfort conditions for occupants in most of the articulate and realistic configurations of actual indoor environments. Specifically, this procedure enables accurate assessment of the radiant field surrounding a subject in a given indoor realistic environment and considers its variability with space and time along with the presence of high-intensity radiant sources. The proposed simulation tool contains a set of algorithms in which the degree of complexity depends on the level of accuracy for modelling the radiative heat transfer between the occupants and surrounding environment. The feasibility of these algorithms for designers and researchers has also been checked for a single room characterised by the presence of windows in two different exposures. This configuration implies a complex pattern of the sun entering the room, which in turn determines relevant spatial modifications of the indoor comfort thermal conditions. Such complex situations are effectively interpreted by the proposed model. This analysis provides useful indications for suitable design of layouts of the confined space and the size of an effective heating, ventilating, and air conditioning system to limit the discomfort felt inside the room
    corecore