Power of Feedback-Induced Beta Oscillations Reflect Omission of Rewards: Evidence From an EEG Gambling Study

The functional role of high beta oscillations (20–35 Hz) during feedback processing has been suggested to reflect unexpected gains. Using a novel gambling task that separates gains and losses across blocks and directly compares reception of monetary rewards to a ‘no-reward/punishment’ condition with equal probability we aimed to further investigate the role of beta oscillations. When contrasting different feedback conditions across rewards, we found that a late low beta component (12–20 Hz) had increased in power during the omission of rewards relative to the reception of rewards, while no differences were observed during the loss domain. These findings may indicate that late low beta oscillations in the context of feedback processing may respond to omission of gains relative to other potential outcomes. We speculate that late low beta oscillations may operate as a learning mechanism that signals the brain to make future adequate decisions. Overall, our study provides new insights for the role of late low beta oscillations in reward processing

RNA sequencing of single cells obtained from immunolabeled tumor sections: the first experience

We performed laser microdissection-assisted RNA sequencing of single cells of breast tumo

Different morphological structures of breast tumors demonstrate individual drug resistance gene expression profiles

AIM

ITO Thin Films for Low-Resistance Gas Sensors

This research was funded by the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP08856540). The research was carried out with the support of a grant under the Decree of the Government of the Russian Federation No. 220 of 9 April 2010 (Agreement No. 075-15-2022-1132 of 1 July 2022). In addition, this research was partly performed at the Institute of Solid State Physics, University of Latvia (ISSP UL). ISSP UL, as the Centre of Excellence, has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD01-2016-2017-Teaming Phase2 under Grant Agreement No. 739508, project CAMART2.Indium tin oxide thin films were deposited by magnetron sputtering on ceramic aluminum nitride substrates and were annealed at temperatures of 500 °C and 600 °C. The structural, optical, electrically conductive and gas-sensitive properties of indium tin oxide thin films were studied. The possibility of developing sensors with low nominal resistance and relatively high sensitivity to gases was shown. The resistance of indium tin oxide thin films annealed at 500 °C in pure dry air did not exceed 350 Ohms and dropped by about 2 times when increasing the annealing temperature to 100 °C. Indium tin oxide thin films annealed at 500 °C were characterized by high sensitivity to gases. The maximum responses to 2000 ppm hydrogen, 1000 ppm ammonia and 100 ppm nitrogen dioxide for these films were 2.21 arbitrary units, 2.39 arbitrary units and 2.14 arbitrary units at operating temperatures of 400 °C, 350 °C and 350 °C, respectively. These films were characterized by short response and recovery times. The drift of indium tin oxide thin-film gas-sensitive characteristics during cyclic exposure to reducing gases did not exceed 1%. A qualitative model of the sensory effect is proposed. © 2022 by the authors. --//-- Published under the CC BY 4.0 license.Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP08856540); ISSP UL, as the Centre of Excellence, has received funding from the European Union’s Horizon 2020 Framework Programme H2020-WIDESPREAD01-2016-2017-Teaming Phase2 under Grant Agreement No. 739508, project CAMART2

The formation of highly dispersed zinc oxide powder during combustion of zinc nitrate with glycine mixture and its application for photocatalytic phenol decomposition

The paper presents the results of a detailed study of the process and products of combustion during self-propagating high-temperature synthesis (SHS) of ZnO zinc oxide powder from mixtures of such common reagents as oxidizer zinc nitrate and reducing agent (fuel) glycine, as well as the application of synthesized highly dispersed submicron and nanosized ZnO powder for the phenol photocatalytic decomposition under the action of ultraviolet irradiation. An aqueous solution of a mixture of reagents (the SHS-S process or Solution Combustion Synthesis – SCS) and the gel from a mixture of initial dry reagents formed when they were moistened due to hygroscopicity (the SHS-G process or Gel Combustion Synthesis – GCS) were combusted. The authors studied the phase and chemical compositions, the structure of the combustion product, and the effect of calcination in an oxidizing air medium and grinding in drum ball and planetary-centrifugal mills, as well as in mortar, on them and their photocatalythic activity. The study showed that calcination considerably increases the photocatalytic activity of combustion products due to a significant decrease in carbon impurity in the unburned fuel remains, and grinding in mills reduces the photocatalytic activity due to iron contamination and coarsening of ZnO particle agglomerates. The difference between the photocatalytic activity of the SHS-G and SHS-S products in the phenol decomposition is evident only at the initial stage of ultraviolet irradiation, after which this difference disappears. The authors discuss the direction of further research to increase significantly the photocatalytic activity of zinc oxide synthesized during combustion to use it effectively for the phenol decomposition under the action of visible light

Modelling human choices: MADeM and decision‑making

Research supported by FAPESP 2015/50122-0 and DFG-GRTK 1740/2. RP and AR are also part of the Research, Innovation and Dissemination Center for Neuromathematics FAPESP grant (2013/07699-0). RP is supported by a FAPESP scholarship (2013/25667-8). ACR is partially supported by a CNPq fellowship (grant 306251/2014-0)