Near-infrared and Mid-infrared Spectroscopy with the Infrared Camera (IRC) for AKARI

The Infrared Camera (IRC) is one of the two instruments on board the AKARI satellite. In addition to deep imaging from 1.8-26.5um for the pointed observation mode of the AKARI, it has a spectroscopic capability in its spectral range. By replacing the imaging filters by transmission-type dispersers on the filter wheels, it provides low-resolution (lambda/d_lambda ~ 20-120) spectroscopy with slits or in a wide imaging field-of-view (approximately 10'X10'). The IRC spectroscopic mode is unique in space infrared missions in that it has the capability to perform sensitive wide-field spectroscopic surveys in the near- and mid-infrared wavelength ranges. This paper describes specifications of the IRC spectrograph and its in-orbit performance.Comment: 13 pages, 7 figures, accepted for publication on PAS

Conceptual design of a wide-field near UV transient survey in a 6U CubeSat

A conceptual design of a wide-field near UV transient survey in a 6U CubeSat is presented. Ultraviolet is one of the frontier in the transient astronomy. To open up the discovery region, we are developing a 6U CubeSat for transient exploration. The possible targets will be supernova shock-breakouts, tidal disruption events, and the blue emission from NS-NS mergers in very early phase. If we only focused on nearby/bright sources, the required detection limit is around 20 mag (AB). To avoid the background and optical light, we chose a waveband of 230-280 nm. As an imaging detector, we employ a delta-doped back-illuminated CMOS. In addition to delta doping, the multi-layer coating directly deposited on the detector enables both a high in-band UV QE and the ultra-low optical rejection ratio. Taking into account these specifications, even an 8 cm telescope can achieve the detection limit of 20 magAB. The expected FoV is larger than 60 deg^2

PETREL: Platform for Extra and Terrestrial Remote Examination with LCTF

A small satellite ”PETREL” for UV astronomy and remote sensing with ”tunable” multi-spectral cameras conducted by an academia-industrial collaboration is presented. This project was originally proposed by an astronomer who desired a satellite for exploration of explosive objects in ultraviolet. To avoid the earthshine the astronomical observations are scheduled only in the nighttime. To utilize the daytime more electively we conceived a plan of ”satellite sharing” with the industrial collaborators, that can also reduce the developing cost drastically. The daytime mission is spectroscopy that is one of the potential fields in terms of data business, because that can provide chemical and biological information on the surface of the earth. We employ multi-spectral cameras making use of liquid crystal tunable filters (LCTFs) that enable adaptive observations at the optimized wave-bands for each targets. In 2020, this remote-sensing project and ultraviolet astronomy mission were accepted as a small satellite project of JAXA’s Innovative Satellite Technology Demonstration program and as an ISAS/JAXA’s small-scale program, respectively. This satellit

Conceptual design of a wide-field near UV transient survey in a 6U CubeSat

A conceptual design of a wide-field near UV transient survey in a 6U CubeSat is presented. Ultraviolet is one of the frontier in the transient astronomy. To open up the discovery region, we are developing a 6U CubeSat for transient exploration. The possible targets will be supernova shock-breakouts, tidal disruption events, and the blue emission from NS-NS mergers in very early phase. If we only focused on nearby/bright sources, the required detection limit is around 20 mag (AB). To avoid the background and optical light, we chose a waveband of 230-280 nm. As an imaging detector, we employ a delta-doped back-illuminated CMOS. In addition to delta doping, the multi-layer coating directly deposited on the detector enables both a high in-band UV QE and the ultra-low optical rejection ratio. Taking into account these specifications, even an 8 cm telescope can achieve the detection limit of 20 magAB. The expected FoV is larger than 60 deg^2

PETREL for Astrophysics and Carbon Business

A multi-purpose 50kg class microsatellite hosting astrophysical mission and earth remote sensing, PETREL , will be launched in 2023. In the night side, PETREL observe the ultra-violet sky with a wide-field telescope covering 50 deg^2 for surveying transient objects related to supernovae, tidal disruption events, and gravitational wave events. Our UV telescope can detect the early phase UV emission from a neutron star merger occurred within 150 Mpc. In addition to the satellite observation, PETREL sends a detection alert including the coordinate and brightness of the UV transient to the ground via the real time communication network within several minutes after detection to conduct follow-up observations with the collaborating ground based observatories over the world. In the day side, PETREL observes the surface of the earth by using the tunable multi-spectral cameras and a ultra-compact hyperspectral camera. Our potential targets are the tropical forests (Green Carbon) and coastal zones (Blue Carbon) in the tropical areas to evaluating the global biological carbon strages. For this purpose PETREL will conduct multiple scale mapping collaborating with drones and small aircraft not only satellite. The obtained data will be used for academical research and for business applications. The technical difficulty of this satellite is that carries out multi-purpose with different requirements, such as astronomical observations which requires a quite high attitude stability and the earth observations requiring a high pointing accuracy, with limited resources. If it is possible, a novel small satellite system or a business style can be realized that can share the payload with academia and industry. PETREL has been adopted as Innovative Satellite Technology Demonstration Program No.3 led by JAXA, and development is underway with the aim of launching in FY2023

Development of Flight Slit-Jaw Optics for Chromospheric Lyman-Alpha SpectroPolarimeter

In sounding rocket experiment CLASP, I have placed a slit a mirror-finished around the focal point of the telescope. The light reflected by the mirror surface surrounding the slit is then imaged in Slit-jaw optical system, to obtain the a-ray Lyman secondary image. This image, not only to use the real-time image in rocket flight rocket oriented direction selection, and also used as a scientific data showing the spatial structure of the Lyman alpha emission line intensity distribution and solar chromosphere around the observation area of the polarimetric spectroscope. Slit-jaw optical system is a two off-axis mirror unit part including a parabolic mirror and folding mirror, Lyman alpha transmission filter, the optical system magnification 1x consisting camera. The camera is supplied from the United States, and the other was carried out fabrication and testing in all the Japanese side. Slit-jaw optical system, it is difficult to access the structure, it is necessary to install the low place clearance. Therefore, influence the optical performance, the fine adjustment is necessary optical elements are collectively in the form of the mirror unit. On the other hand, due to the alignment of the solar sensor in the US launch site, must be removed once the Lyman alpha transmission filter holder including a filter has a different part from the mirror unit. In order to make the structure simple, stray light measures Aru to concentrate around Lyman alpha transmission filter. To overcome the difficulties of performing optical alignment in Lyman alpha wavelength absorbed by the atmosphere, it was planned 'following four steps in order to reduce standing time alignment me. 1. is measured in advance refractive index at Lyman alpha wavelength of Lyman alpha transmission filter (121.567nm), to prepare a visible light Firuwo having the same optical path length in the visible light (630nm).2. The mirror structure CLASP before mounting unit standing, dummy slit and camera standing prescribed position in leading frame is, to complete the internal alignment adjustment. 3. CLASP structure F mirror unit and by attaching the visible light filter, as will plague the focus is carried out in standing position adjustment visible flight products camera. 4. Replace the Lyman alpha transmission filter, it is confirmed by Lyman alpha wavelength (under vacuum) the requested optical performance have come. Currently, up to 3 of the steps completed, it was confirmed in the visible light optical performance that satisfies the required value sufficiently extended. Also, put in Slit-jaw optical system the sunlight through the telescope of CLASP, it is also confirmed that and that stray light rejection no vignetting is in the field of view meets request standing

Development of Flight Slit-Jaw Optics for Chromospheric Lyman-Alpha SpectroPolarimeter

In sounding rocket experiment CLASP, I have placed a slit a mirrorfinished around the focal point of the telescope. The light reflected by the mirror surface surrounding the slit is then imaged in Slitjaw optical system, to obtain the alpharay Lyman secondary image. This image, not only to use the realtime image in rocket flight rocket oriented direction selection, and also used as a scientific data showing the spatial structure of the Lyman alpha emission line intensity distribution and solar chromosphere around the observation area of the polarimetric spectroscope. Slitjaw optical system is a two offaxis mirror unit part including a parabolic mirror and folding mirror, Lyman alpha transmission filter, the optical system magnification 1x consisting camera. The camera is supplied from the United States, and the other was carried out fabrication and testing in all the Japanese side. Slitjaw optical system, it is difficult to access the structure, it is necessary to install the low place clearance. Therefore, influence the optical performance, the fine adjustment is necessary optical elements are collectively in the form of the mirror unit. On the other hand, due to the alignment of the solar sensor in the US launch site, must be removed once the Lyman alpha transmission filter holder including a filter has a different part from the mirror unit. In order to make the structure simple, stray light measures Aru to concentrate around Lyman alpha transmission filter. To overcome the difficulties of performing optical alignment in Lyman alpha wavelength absorbed by the atmosphere, it was planned following four steps in order to reduce standing time alignment me. 1: is measured in advance refractive index at Lyman alpha wavelength of Lyman alpha transmission filter (121.567nm), to prepare a visible light Firuwo having the same optical path length in the visible light (630nm). 2: The mirror structure CLASP before mounting unit standing, dummy slit and camera standing prescribed position in leading frame is, to complete the internal alignment adjustment. 3: CLASP structure F mirror unit and by attaching the visible light filter, as will plague the focus is carried out in standing position adjustment visible flight products camera. 4: Replace the Lyman alpha transmission filter, it is confirmed by Lyman alpha wavelength (under vacuum) the requested optical performance have come. Currently, up to 3 of the steps completed, it was confirmed in the visible light optical performance that satisfies the required value sufficiently extended. Also, put in Slitjaw optical system the sunlight through the telescope of CLASP, it is also confirmed that and that stray light rejection no vignetting is in the field of view meets request standing

Psycho-physiological effects of naps during night shifts on morning types and evening types

Abstract: Psycho-Physiological Effects of Naps during Night Shifts on Morning Types and Evening Types: Hidemaro TAKEYAMA, et al. Department of Hygiene and Occupational Health, Nagoya City University, Medical School-An experimental study was carried out under simulated shift-work schedules to examine the effects of a nighttime nap on task performances and psycho-physiological functions on morningness (M-types) and eveningness (E-types) subjects. Sixty male students, classified as M-types or E-types by the Japanese version morningnesseveningness questionnaire, were recruited for this study. Five moderate M-types and eight moderate E-types were selected. Their MEQ scores were 32-41 (average 36.9) in E-types and 60-64 (average 62.4) in M-types, respectively. Experiment periods were simulated shift schedules of 9 consecutive days consisting of 2 d shifts (working 8:00-16:00), 3 night shifts (working 22:00-8:00) and 3 d shifts. They carried out two series of experiments. In one series the subjects took a nap from 2:00 to 4:00. In the other series they did not take a nap during the night shift. In order to minimize the effect of the previous experiments, a rest period of more than one week was inserted between the nap-condition and the no-nap condition experiments. During the shifts, the subjects repeatedly performed two kinds of tasks: typing figures listed randomly on sheets into a computer for 20 min; and after a 5 min break performing mental arithmetic with two adjacent figures, listed randomly on the sheets, for 15 min. During the breaks, psychophysiological functions and questionnaires on subjective feelings of fatigue and index of the state of anxiety were examined. Throughout the experiments, heart rate variability was also recorded with a portable recorder to evaluate autonomic nerve activity. Task performances decreased and subjective feelings of fatigue and anxiety scores increased in proportion to the length of time worked in both M-types and E-types who had no nap. Received Aug 27, 2001; Accepted Dec 21, 2001 Correspondence to: H. Takeyama, Department of Hygiene and Occupational Health, Nagoya City University, Medical School, Nagoya, In M-types, these changes were significantly suppressed by the nap on the first night of duty. Parasympathetic nerve activity for M-types estimated from heart rate variability between 4:00 and 6:00 under nap conditions decreased significantly compared with that under nonap conditions. Overall changes for E-types, however, were smaller than those for M-types in terms of task performance and psycho-physiological parameters. The present study suggested that taking a nighttime nap was an effective way to reduce adverse effects due to first nocturnal work, especially for M-types. (J Occup Health 2002; 44: 89-98