Photoassisted Degradation of a Herbicide Derivative, Dinoseb, in Aqueous Suspension of Titania

The titanium dioxide (TiO2) photoassisted degradation of herbicide dinoseb has been examined in aqueous suspensions under UV light irradiation. The degradation kinetics were studied under various conditions such as substrate concentration, type of catalyst, catalyst dosage, pH, and light intensity as well as in presence of electron acceptors such as hydrogen peroxide, potassium bromate, and potassium persulphate under continuous air purging, and the degradation rates were found to be strongly influenced by these parameters. The Degussa P25 was found to be more efficient photocatalyst as compared to other photocatalysts tested. Dinoseb was found to degrade efficiently in acidic pH and all the electron acceptors studied enhanced the degradation rate. The results manifested that the photocatalysis of dinoseb followed pseudo-first-order kinetics. A qualitative study of the degradation products generated during the process was performed by GC-MS, and a degradation mechanism was proposed

Four- and five-component molecular solids: crystal engineering strategies based on structural inequivalence

A synthetic strategy is described for the co-crystallization of four-and five-component molecular crystals, based on the fact that if any particular chemical constituent of a lower cocrystal is found in two different structural environments, these differences may be exploited to increase the number of components in the solid. 2-Methylresorcinol and tetramethylpyrazine are basic template molecules that allow for further supramolecular homologation. Ten stoichiometric quaternary cocrystals and one quintinary cocrystal with some solid solution character are reported. Cocrystals that do not lend themselves to such homologation are termed synthetic dead ends

Quaternary cocrystals: combinatorial synthetic strategies based on long-range synthon Aufbau modules (LSAM)

A synthetic strategy is outlined whereby a binary cocrystal may be developed in turn into a ternary and finally into a quaternary cocrystal. The strategy hinges on the concept of the long-range synthon Aufbau module (LSAM) which is a large supramolecular synthon containing more than one type of intermolecular interaction. Modulation of these interactions may be possible with the use of additional molecular components so that higher level cocrystals are produced. We report six quaternary cocrystals here. All are obtained as nearly exclusive crystallization products when four appropriate solid compounds are taken together in solution for crystallization

Strategy and Methodology in the Synthesis of Multicomponent Molecular Solids: The Quest for Higher Cocrystals

Crystal engineering is the art and science of making crystals by design. Crystallization is inherently a purifying phenomenon. Bringing together more than one organic compound into the same crystal always needs deliberate action. Cocrystals are important because they offer a route to the controlled modulation of crystal properties. The route to cocrystal synthesis was opened up with the heterosynthon concept, which considers the complementary recognition of chemical groups from different molecules. Using this concept, binary cocrystals of enormous variety have been generated, even as crystal engineering has evolved into a form of solid-state supramolecular synthesis. Introducing a third component (a component is somewhat arbitrarily defined as an organic substance that is a solid at room temperature, mostly with the idea of excluding solvates) in a stoichiometric manner requires substantially greater effort and a careful balance of intermolecular interactions-their strengths, directional properties, and distance falloff characteristics. The first systematic ternary cocrystal synthesis was reported around 15 years ago. Drawing in a fourth component in stoichiometric amounts is exceedingly difficult, and we reported such syntheses in 2016. To date, a limited number of ternary cocrystals have been realized (around 120 in all, with a half from our group) and an even smaller number of quaternary cocrystals (around 30, all from our group, barring one). It is impressive that our experiments largely yielded the intended higher cocrystal (three- or four-component) with very small traces of contaminating binaries and pure compounds. A fifth or sixth component may be brought into the solid in the manner of a solid solution in that these components are situated at one of the sites of the quaternary cocrystal. To date, five components have not been included stoichiometrically within the same crystal. This is still an open challenge. The merit in synthesizing (higher) cocrystals is that one can systematically engineer property modularity: Each component is associated with a distinct property. This is important in the pharmaceutical industry, where each component can, in principle, confer a different, desirable property-drug action, solubility, or permeability. However, difficult synthetic targets are also addressed in chemistry simply because they are there. The intellectual satisfaction in making something that is very difficult to make renders the enterprise worthwhile in itself, and new chemistry usually gets uncovered in the process. The development of synthetic organic chemistry can undoubtedly be credited to various reliable methods for chemical transformations, and many difficult total syntheses were achieved by employing these methods over two centuries of research. In contrast, supramolecular synthesis (of multicomponent cocrystals and other assemblies) is in no way at a similar level of sophistication because the subject is still relatively young. Our group and others have reported the synthesis of many higher cocrystals with reliable, reproducible, and robust design strategies. There is a general perception that the isolation of some of these cocrystals is a matter of luck! The crux of this Account is that far from being a serendipitous matter, higher cocrystals may only be made with a judicious combination of strategy and methodology-the essence of synthesis

Solar Photocatalytic Decolorization of Two Azo Dye Derivatives, Acid Red 17 and Reactive Red 241 in Aqueous Suspension

The photocatalytic decolorization approach using sunlight has potential applications in the treatment of effluents from textile dye industries. With this aim, the decolorization of two representative commercially used textile azo dye derivatives such as AR17 and RR241 have been investigated under sunlight and atmospheric oxygen in aqueous suspension of titanium dioxide by monitoring the change in concentration using UV-Vis. Spectrophotometry. A detailed decolorization kinetics of both dye derivatives have been investigated under variety of conditions such as type of TiO2 powders (Anatase/Anatase-rutile mixture), catalyst dose, substrate concentration, pH and electron acceptors (H2O2 and KBrO3). The highest decolorization rate for dye derivative AR17 and RR241 were observed at pH 7.5 and 6.0, respectively. The photocatalyst Degussa P25 having 80:20 anatase:rutile mixture was found to be better for the decolorization of both the dyes as compared to two other photocatalysts tested. The decolorization rate was enhanced in the presence of electron acceptors such as H2O2 and KBrO3. Results demonstrated that the decolorization of dyes under sunlight is strongly influenced by different parameters investigated in this paper

Heterogeneous photocatalysed degradation of an insecticide derivative acetamiprid in aqueous suspensions of semiconductor

The photocatalytic degradation of an insecticide derivative, acetamiprid has been investigated in aqueous suspensions of titanium dioxide (TiO2) as a function of irradiation time under a variety of conditions using UV-Vis and HPLC analysis techniques. The degradation kinetics were studied under different conditions such as types of TiO2, catalyst and substrate concentration, reaction pH and in the presence of electron acceptors like hydrogen peroxide (H2O2), potassium bromate (KBrO3), and potassium persulphate (K2S2O8) besides molecular oxygen (O-2). The degradation rates were found to be strongly influenced by all the above parameters. The photocatalyst, Degussa P25 was found to be more efficient as compared to other TiO2 powders used under these studies. The model compound was found to degrade more efficiently in alkaline pH and all electron acceptors enhanced the degradation rate. GC/MS analysis of the irradiated samples indicated the formation of several by-products. A probable mechanism for the formation of by-products has been proposed. (C) 2010 Elsevier B.V. All rights reserved

Fabrication of novel Ag3PO4/BiOBr heterojunction with high stability and enhanced visible-light-driven photocatalytic activity

Herein, we report a facile and effective method to enhance the photocatalytic activity of bismuth oxybromide (BiOBr) semiconductor through the fabrication of heterojunction with Ag3PO4. The as synthesized Ag3PO4/BiOBr microspheres were characterized with transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD) and UV-vis diffuse reflectance spectroscopy (DRS). The new Ag3PO4/BiOBr heterojunctions exhibited wide absorption in the visible-light region and compared to pure BiOBr and Ag3PO4 samples displayed exceptionally high photocatalytic activity for the degradation of typical organic pollutants such as Rhodamine B (RhB) and phenol. The optimal Ag/Bi weight ratio in Ag3PO4/BiOBr microsphere (AB7) was found to be 0.7. The enhanced photocatalytic activity was related to the efficient separation of electron-hole pairs derived from matching band potentials between BiOBr and Ag3PO4 which results into the generation of natural energy bias at heterojunction and subsequent transfer of photoinduced charge carriers. Moreover, the synthesized samples exhibited almost no loss of activity even after 6 recycling runs indicating their high photocatalytic stability. Considering the facile and environment friendly route for the synthesis of Ag3PO4/BiOBr hybrids with enhanced visible-light induced photocatalytic activity, it is possible to widely apply these hybrids in various fields such as waste water treatment. (C) 2015 Elsevier B.V. All rights reserved

Combinatorial crystal synthesis of ternary solids based on 2-methylresorcinol

Cocrystallization experiments of 2-methylresorcinol with several N-bases were performed to identify selective and preferred crystallization routes in relevant structural landscapes. These preferred supramolecular synthon-based crystallization routes were further enhanced by using carefully chosen coformer combinations to synthesize stoichiometric ternary solids. The exercise consists of modular selection and amplification of supramolecular synthons from single through two-to three-component molecular solids, and is equivalent to solid state combinatorial synthesis

Ag2S sensitized mesoporous Bi2WO6 architectures with enhanced visible light photocatalytic activity and recycling properties

To harvest solar energy more efficiently, novel Ag2S/Bi2WO6 heterojunctions were synthesized by a hydrothermal route. This novel photocatalyst was synthesized by impregnating Ag2S into a Bi2WO6 semiconductor by a hydrothermal route without any surfactants or templates. The as prepared structures were characterized by multiple techniques such as X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmet-Teller (BET) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectrometry (EDS), UV-vis diffuse reflection spectroscopy (DRS) and photoluminescence (PL). The characterization results suggest mesoporous hierarchical spherical structures with a high surface area and improved photo response in the visible spectrum. Compared to bare Bi2WO6, Ag2S/Bi2WO6 exhibited much higher photocatalytic activity towards the degradation of dye Rhodamine B (RhB). Although silver based catalysts are easily eroded by photogenerated holes, the Ag2S/Bi2WO6 photocatalyst was found to be highly stable in the cyclic experiments. Based on the results of BET, Pl and DRS analysis, two possible reasons have been proposed for the enhanced visible light activity and stability of this novel photocatalyst: (1) broadening of the photoabsorption range and (2) efficient separation of photoinduced charge carriers which does not allow the photoexcited electrons to accumulate on the conduction band of Ag2S and hence prevents the photocorrosion