Summary of emissions reduction technology programs

The NASA emissions reduction contract programs for EPA aircraft engine classes P2 (turboshaft engines), T1 (jet engines with thrust under 8000 lb), T4 (JT8D) engines), and T2 (jet engines with thrust over 8000 lb) are discussed. The most important aspects of these programs, the commonality of approaches used, the test results, and assessments regarding applications of the derived technology are summarized

Combustion technology overview

An overview of combustor technology developments required for use of broadened property fuels in jet aircraft is presented. The intent of current investigations is to determine the extent to which fuel properties can be varied, to obtain a data base of combustion - fuel quality effects, and to determine the trade-offs associated with broadened property fuels. Subcomponents of in-service combustors such as fuel injectors and liners, as well as air distributions and stoichiometry, are being altered to determine the extent to which fuel flexibility can be extended. Finally, very advanced technology consisting of new combustor concepts is being evolved to optimize the fuel flexibility of gas turbine combustors

GR models of the X-ray spectral variability of MCG--6-30-15

We study in detail the GR models of the X-ray spectral variability for various geometries of the X-ray source and with various relativistic effects being the dominant cause of spectral variability. The predicted properties are compared with the Suzaku observational data of the Seyfert 1 galaxy MCG--6-30-15. The data disfavor models with the X-ray source (1) moving vertically on the symmetry axis or (2) corotating with the disc and changing height not far above the disc surface. The most likely explanation for the observed variability is given by the model involving the X-ray source located at a very small, varying distance from a rapidly rotating black hole. This model predicts some enhanced variations in the red wing of the Fe line, which are not seen in the Suzaku observations. However, the enhanced variability of the red wing, while ruled out by the Suzaku data, is consistent with an excess RMS variability, between 5 and 6 keV, reported for some previous ASCA and XMM observations. We speculate that the presence or lack of such a feature is related to the change of the ionization state of the innermost part of the disc, however, investigation of such effects is currently not possible in our model (where a neutral disc is assumed). If the model, completed by description of ionization effects, proves to be fully consistent with the observational data, it will provide a strong indication that the central black hole in MCG--6-30-15 rotates rapidly, supporting similar conclusions derived from the Fe line profile.Comment: 15 pages, accepted for publication in A&

Small engine technology programs

Described here is the small engine technology program being sponsored at the Lewis Research Center. Small gas turbine research is aimed at general aviation, commuter aircraft, rotorcraft, and cruise missile applications. The Rotary Engine program is aimed at supplying fuel flexible, fuel efficient technology to the general aviation industry, but also has applications to other missions. The Automotive Gas Turbine (AGT) and Heavy-Duty Diesel Transport Technology (HDTT) programs are sponsored by DOE. The Compound Cycle Engine program is sponsored by the Army. All of the programs are aimed towards highly efficient engine cycles, very efficient components, and the use of high temperature structural ceramics. This research tends to be generic in nature and has broad applications. The HDTT, rotary technology, and the compound cycle programs are all examining approaches to minimum heat rejection, or 'adiabatic' systems employing advanced materials. The AGT program is also directed towards ceramics application to gas turbine hot section components. Turbomachinery advances in the gas turbine programs will benefit advanced turbochargers and turbocompounders for the intermittent combustion systems, and the fundamental understandings and analytical codes developed in the research and technology programs will be directly applicable to the system projects

Bulk motion Comptonization in black-hole accretion flows

We study spectra generated by Comptonization of soft photons by cold electrons radially free-falling onto a black hole. We use a Monte Carlo method involving a fully relativistic description of Comptonization in the Kerr space-time. In agreement with previous studies, we find that Comptonization on the bulk motion of free fall gives rise to power-law spectra with the photon index of Gamma >~ 3. In contrast to some previous studies, we find that these power-law spectra extend only to energies << 511 keV. We indicate several effects resulting in generic cutoffs of such spectra at several tens of keV, regardless of any specific values of physical parameters in the model. This inefficiency of producing photons with energies > 100 keV rules out bulk motion Comptonization as a main radiative process in soft spectral states of black-hole binaries. The normalization of the power law (below the cutoff) with respect to the peak of the blackbody emission of the surrounding disc is typically very low, except for models with an overlap between the disc and the plasma, in which case the spectra are very soft, Gamma >~ 4.Comment: 10 pages, 4 figures, revised version, accepted for publication in MNRA

Swirl can primary combustor

A swirl can full annulus combustor, operable over a wide range of exit average temperatures is used in a high performance gas turbine engine for advanced aircraft. A large number of swirl can modules are mounted in an array in each combustor

Swirl-can combustor segment

Combustor produces uniform circumferential and radial combustor exit temperature profiles and high combustion efficiency at high temperature loads. Absence of diluent air entry ports eliminates stress concentration points, low pressure fuel alleviates nozzle fouling, and abundant air at all burning stages reduces smoke

X-ray spectra of hot accretion flows

We study radiative properties of hot accretion flows in a general relativistic model with an exact treatment of global Comptonization, developed in our recent works. We note a strong dependence of electron temperature on the strength of magnetic field and we clarify that the underlying mechanism involves the change of the flow structure, with more strongly magnetised flows approaching the slab geometry more closely. We find that the model with thermal synchrotron radiation being the main source of seed photons agrees with the spectral index vs Eddington ratio relation observed in black hole transients below 1 per cent of the Eddington luminosity, LEdd, and models with a weak direct heating of electrons (small delta) are more consistent with observations. Models with large delta predict slightly too soft spectra, furthermore, they strongly overpredict electron temperatures at ~0.01 LEdd. The low-luminosity spectra, at <0.001 LEdd, deviate from a power-law shape in the soft X-ray range and we note that the first-scattering bump often resembles a thermal like component, with the temperature of a few hundred eV, superimposed on a power-law spectrum. The model with thermal Comptonization of thermal synchrotron radiation does not agree with well studied AGNs observed below ~0.01 LEdd, for which there is a substantial evidence for the lack of an inner cold disc. This indicates that the model of hot flows powering AGNs should be revised, possibly by taking into account an additional (but internal to the flow) source of seed photons.Comment: 16 pages, 10 figures, accepted in MNRA

Small gas turbine engine technology

Performance of small gas turbine engines in the 250 to 1,000 horsepower size range is significantly lower than that of large engines. Engines of this size are typically used in rotorcraft, commutercraft, general aviation, and cruise missile applications. Principal reasons for the lower efficiencies of a smaller engine are well known: component efficients are lower by as much as 8 to 10 percentage points because of size effects. Small engines are designed for lower cycle pressures and temperatures because of smaller blading and cooling limitations. The highly developed analytical and manufacturing techniques evolved for large engines are not directly transferrable to small engines. Thus, it was recognized that a focused effort addressing technologies for small engies was needed and could significantly impact their performance. Recently, in-house and contract studies were undertaken at the NASA Lewis Research Center to identify advanced engine cycle and component requirements for substantial performance improvement of small gas turbines for projected year 2000 applications. The results of both in-house research and contract studies are presented. In summary, projected fuel savings of 22 to 42 percent could be obtained. Accompanying direct operating cost reductions of 11 to 17 percent, depending on fuel cost, were also estimated. High payoff technologies are identified for all engine applications, and recent results of experimental research to evolve the high payoff technologies are described