2,295 research outputs found
Risk of cervical cancer is not increased in Chinese carrying homozygous arginine at codon 72 of p53
Homozygous arginine at codon 72 (HA72) of p53 was found in 22% of normal cervices and 30.0% of cervical cancers and no significant difference was detected between normal and cervical cancer with or without HPV 16/18. There was no correlation between HA72 and risk of cervical cancer in Chinese.link_to_subscribed_fulltex
Friction-stir welding of ultrafine grained austenitic 304L stainless steel produced by martensitic thermomechanical processing
An ultrafine grained 304L austenitic stainless steel was produced by martensitic thermomechanical processing and joined by applying Friction Stir Welding (FSW). The thermomechanical processing comprised a cold roll procedure up to 80% reduction followed by annealing. After FSW, different grain structures in different regions of the weld nugget were observed due to the asymmetry in the heat generation during the welding process. Grain growth was found to be the most predominant phenomena in the region just ahead of the rotating tool during the thermal cycle of FSW. A banded structure was observed in the advancing side of the weld nugget. TEM observations revealed that nanometric sigma phase precipitates were present both in the grain boundaries and inside the grains of this region. Shear textures were clearly identified in the weld center. The lack of rotated cube texture shows that the discontinuous dynamic recrystallization (DDRX) is not active in the final microstructure. Increasing the welding speed can reduce the final grain size of the weld nugget leading to higher hardness. Hardness is found to increase in the weld and this is not just a grain refinement effect, but also due to the presence of sub-boundaries and a high density of dislocations.postprin
The role of martensitic transformation on bimodal grain structure in ultrafine grained AISI 304L stainless steel
In the present study, metastable AISI 304L austenitic stainless steel samples were subjected to different cold rolling reductions from 70% to 93%, followed by annealing at 700 °C for 300 min to form ultrafine grained (UFG) austenite with different grain structures. Transmission electron microscopy (TEM) and nanoindentation were used to characterize the martensitic transformation, in order to relate it to the bimodal distribution of the austenite grain size after subsequent annealing. The results showed that the martensite morphology changed from lath type in the 60% rolled sample to a mixture of lath and dislocation-cell types in the higher rolling reductions. Calculation of the Gibbs free energy change during the reversion treatment showed that the reversion mechanism is shear controlled at the annealing temperature and so the morphology of the reverted austenite is completely dependent on the morphology of the deformation induced martensite. It was found that the austenite had a bimodal grain size distribution in the 80% rolled and annealed state and this is related to the existence of different types of martensite. Increasing the rolling reduction to 93% followed by annealing caused changing of the grain structure to a monomodal like structure, which was mostly covered with small grains of around 300 nm. The existence of bimodal austenite grain size in the 80% rolled and annealed 304L stainless steel led to the improvement of ductility while maintaining a high tensile strength in comparison with the 93% rolled and annealed sample.postprin
Recommended from our members
An Investigation of the Effects of Front-Line Employees\u27 Work-Family Conflict on Customer Satisfaction through Exhaustion and Emotional Displays
The present study investigates the distal effects of front-line employees\u27 work-family conflict on customer satisfaction. Based on data from 200 paired employee-customer interactions at six hotels, a Structural Equation Modeling was conducted to test the hypothesized model and the results supported most of our predictions. Specifically, participants\u27 FIW (family interfering with work) was positively linked to physical, emotional, and mental exhaustion, while WIF (work interfering with family) did not have such associations. Further, individuals with higher levels of physical exhaustion were more likely to manage their emotions by faking positive emotions and suppressing negative emotions, whereas participants with higher levels of emotional exhaustion were more likely to fake positive emotions. Although faking positive emotions enhances the employee\u27s role performance, such actions failed to enhance customer satisfaction. The current research extends our knowledge of work-family conflict on employee-customer interactions and suggests that hospitality organizations need to be aware of the critical effects of employees\u27 family affairs on work behaviors and ultimately on customer satisfaction
Fractography, elastic modulus and oxidation resistance of novel metal-intermetallic Ni/Ni 3Al multilayer films
Novel metal–intermetallic Ni/Ni3Al multilayer films are synthesized by a magnetron sputtering technique. The fractography, elastic modulus, and the oxidation resistance of the multilayer films are studied by a series of experimental tests. The scanning electron microscopy fractography of the films shows that both Ni and Ni3Al layers fracture with the appearance of ductile metal failure. No metal–intermetallic delamination appears in the multilayered films. Fluted dimpling in each Ni and Ni3Al layer is
evident and continuous, layer through layer, illustrating very good adherence among the constituent layers. Such adherence makes the toughness of the Ni layers capable of transferring into the Ni3Al layers. Young’s modulus of the Ni/Ni3Al film is found to be 226 and 253 ± 10 GPa by nanoindentation and laser acoustic techniques, respectively. The continuity of elastic modulus between the two phases is revealed by nanoindentation test. The modulus continuity indicates an excellent integration of the
constituent layers with similar crystal structure and close lattice constants. This integration makes the multilayers unsurpassed in comprehensive mechanical properties. Sheet resistance measurements show a good protective ability of the Ni/Ni3Al
multilayers during high temperature oxidation. X-ray photoelectron spectroscopy spectra suggest that crystallized Al2O3 /Ni scales formed during the deposition and subsequent annealing processes are apparently responsible for the stability of these
films under oxidative conditions. The appearance of the crystallized Al2O3 /Ni thin scales on the top of Ni3Al layers provides the Ni/Ni3Al multilayers good thermal oxidation resistance without lowering the fracture toughness.published_or_final_versio
- …