Geology and Geochemistry of the Ship Creek and Monashka Creek reservoirs, Southcentral Alaska

Graywacke from the Ship Creek watershed, dissolves incongruently in distilled water. The dissolution appears to follow a first-order rate law which in integrated form is: k = -2.303/t log No-Q/No where No is the concentration in ppm of Ca, Mg, Na or K in the graywacke, Q is the total quantity of these ions leached in time t(days), k is the rate constant in days-1. Experimentally derived rate constants for the dissolution of graywacke in distilled water at 5oC are log k+2CA, -4.128 day-1; log k+2Mg, -6.174 day-1; log k+Na, -5.800 day-1; and log k+K, -5.249 day-1. The above constants are for 40 to +100 mesh graywacke. A surface area correction term must be inserted in the above equation if it is applied to a different size fraction. Using the above equation and rate constants, the chemical composition of a water in contact with graywacke was calculated. With the exception of magnesium, the agreement between the calculated composition and that of Ship Creek water was good. Assuming that the groundwater in the Ship Creek watershed contacts about 1.5X104cm2 graywacke per liter, 120 to 360 days are required at 5oC to produce the concentration of ions observed in Ship Creek. Release of exchangeable H+ from the soil mat to the reservoir water will not significant1y lower the pH of the water. Leaching of heavy metals from sulfides contained in the bedrock of the two watersheds does not pose a water quality hazard. Lineaments in the bedrock at Monashka Creek may provide channels through which water may seep from the reservoir. These are not expected to pose a problem in retaining water in the reservoir, but they may result in small, new springs down grade from the reservoir.The work upon which this report is based was supported by funds provided by the United States Department of the Interior, Office of Water Resources Research and Technology, as authorized by the Water Resources Research Act of 1964, Public Law 88-379, as amended. (Project A-045-ALAS

Long range order in the classical kagome antiferromagnet: effective Hamiltonian approach

Following Huse and Rutenberg [Phys. Rev. B 45, 7536 (1992)], I argue the classical Heisenberg antiferromagnet on the kagom\'e lattice has long-range spin order of the $\sqrt{3}\times\sqrt{3}$ type (modulo gradual orientation fluctuations of the spins' plane). I start from the effective quartic Hamiltonian for the soft (out of plane) spin fluctuation modes, and treat as a perturbation those terms which depend on the discrete coplanar state. Soft mode correlations, which become the coefficients of a discrete effective Hamiltonian, are estimated analytically.Comment: 4pp, no figures. Converted to PRB format, extensive revisions/some reorderings to improve clarity; some cut

Critical joints in large composite aircraft structure

A program was conducted at Douglas Aircraft Company to develop the technology for critical structural joints of composite wing structure that meets design requirements for a 1990 commercial transport aircraft. The prime objective of the program was to demonstrate the ability to reliably predict the strength of large bolted composite joints. Ancillary testing of 180 specimens generated data on strength and load-deflection characteristics which provided input to the joint analysis. Load-sharing between fasteners in multirow bolted joints was computed by the nonlinear analysis program A4EJ. This program was used to predict strengths of 20 additional large subcomponents representing strips from a wing root chordwise splice. In most cases, the predictions were accurate to within a few percent of the test results. In some cases, the observed mode of failure was different than anticipated. The highlight of the subcomponent testing was the consistent ability to achieve gross-section failure strains close to 0.005. That represents a considerable improvement over the state of the art

Shock and vibration tests of a SNAP-8 NaK pump

The pump used for reactor cooling in the SNAP 8 space power system was subjected to the expected vehicle launch vibration, and shock loading in accordance with the SNAP 8 environmental specification. Subsequent disassembly revealed damage to the thrust bearing pins, which should be redesigned and strengthened. The unit was operational, however, when run in a test loop after reassembly

Flow properties of a series of experimental thermoplastic polymides

The softening temperature to degradation temperature range of the polymers was about 440 to 650 K. All of the polymers retained small amounts of solvent as indicated by an increase in T(sub g) as the polymers were dried. The flow properties showed that all three polymers had very high apparent viscosities and would require high pressures and/or high temperatures and/or long times to obtain adequate flow in prepregging and molding. Although none was intended for such application, two of the polymers were combined with carbon fibers by solution prepregging. The prepregs were molded into laminates at temperatures and times, the selection of which was guided by the results from the flow measurements. These laminates had room temperature short beam shear strength similar to that of carbon fiber laminates with a thermosetting polyimide matrix. However, the strength had considerable scatter, and given the difficult processing, these polymides probably would not be suitable for continuous fiber composites

Localization transitions in non-Hermitian quantum mechanics

We study the localization transitions which arise in both one and two dimensions when quantum mechanical particles described by a random Schr\"odinger equation are subjected to a constant imaginary vector potential. A path-integral formulation relates the transition to flux lines depinned from columnar defects by a transverse magnetic field in superconductors. The theory predicts that the transverse Meissner effect is accompanied by stretched exponential relaxation of the field into the bulk and a diverging penetration depth at the transition.Comment: 4 pages (latex) with 3 figures (epsf) embedded in the text using the style file epsf.st

Probing the Role of the Barrier Layer in Magnetic Tunnel Junction Transport

Magnetic tunnel junctions with a ferrimagnetic barrier layer have been studied to understand the role of the barrier layer in the tunneling process - a factor that has been largely overlooked until recently. Epitaxial oxide junctions of highly spin polarized La0.7Sr0.3MnO3 and Fe3O4 electrodes with magnetic NiMn2O4 (NMO) insulating barrier layers provide a magnetic tunnel junction system in which we can probe the effect of the barrier by comparing junction behavior above and below the Curie temperature of the barrier layer. When the barrier is paramagnetic, the spin polarized transport is dominated by interface scattering and surface spin waves; however, when the barrier is ferrimagnetic, spin flip scattering due to spin waves within the NMO barrier dominates the transport.Comment: 10 pages, 3 figure

Study and development of acoustic treatment for jet engine tailpipes

A study and development program was accomplished to attenuate turbine noise generated in the JT3D turbofan engine. Analytical studies were used to design an acoustic liner for the tailpipe. Engine ground tests defined the tailpipe environmental factors and laboratory tests were used to support the analytical studies. Furnace-brazed, stainless steel, perforated sheet acoustic liners were designed, fabricated, installed, and ground tested in the tailpipe of a JT3D engine. Test results showed the turbine tones were suppressed below the level of the jet exhaust for most far field polar angles

The effect of neuronal conditional knock-out of peroxisome proliferator-activated receptors in the MPTP mouse model of Parkinson's disease

This study was supported by Parkinson’s Disease Foundation (IRGP 09-11 (P.T.)), the Royal Society (2006/R1 (P.T.)), the Wellcome Trust (WT080782MF (P.T.)), the Biotechnology and Biological Sciences Research Council (P.T. and H.L.M.), the National Institutes of Health (DK057978) (R.M.E.), and by grants from the Leona M. and Harry B. Helmsley Charitable Trust (R.M.E.), the Glenn Foundation for Medical Research (R.M.E.), and the Ellison Medical Foundation (R.M.E.). R.M.E. is an investigator at the Howard Hughes Medical Institute and March of Dimes Chair in Molecular and Developmental Biology at the Salk Institute. The authors would like to thank Lynne J. Hocking, University of Aberdeen, for her assistance with the statistics. We are grateful to the staff of the Medical Research Facility for their help with the animal care and the microscopy core facility at the University of Aberdeen for the use of microscopy equipment.Peer reviewedPublisher PD