1,838 research outputs found
Evaluation of Conducive Environment for Implementation of Quality Management System in an Organisation
The ISO 9000 quality management system (QMS) is a philosophy. It is a consistent and logical approach, which if implemented and practiced in day-to-day activities, with total support from senior management, can lead to doing things right, first time-every time. Many organisations adopt ISO 9000 system as a milestone in their quest for quality management programme. Effectiveness of a system depends on the attitude of employees who are responsible for its implementation. Therefore, it is essential to know the prevailing environment in an organisation. To measure the attitude of employees, a survey through a wel1-designed questionnaire can be used as an effective tool. The items of questionnaire are framed on the basis of requirements of QMS. Attitude of employees is measured on a five-point scale, for each answer. Agreement or disagreement (positive or negative) directly measures the attitude of an employee on the said aspect Data analysis is carried out for establishing the validity of individual score to the total score of items across, using product moment correlation formula. Based on analysis of data, a comprehensive programme can be worked out for correcting the deficiencies observed through the attitude survey. This can also be used as a base for measuring the improvement of QMS in an organisation
Squamous Cell Carcinoma in a Heel Ulcer in a Patient With Diabetes
A technique for measuring B-H curves of grain-oriented silicon steel along arbitrary directions has been developed. As the control of waveform is not necessary in this technique, it is possible to measure B-H curves up to high flux densities which are required for calculating flux distribution using the finite element method</p
NOS2-deficient mice with hypoxic necrotizing lung lesions predict outcomes of tuberculosis chemotherapy in humans
10.1038/s41598-017-09177-2Scientific Reports71885
Artemisinin-Resistant Malaria: Research Challenges, Opportunities, and Public Health Implications
Artemisinin-based combination therapies are the most effective drugs to treat Plasmodium falciparum malaria. Reduced sensitivity to artemisinin monotherapy, coupled with the emergence of parasite resistance to all partner drugs, threaten to place millions of patients at risk of inadequate treatment of malaria. Recognizing the significance and immediacy of this possibility, the Fogarty International Center and the National Institute of Allergy and Infectious Diseases of the U.S. National Institutes of Health convened a conference in November 2010 to bring together the diverse array of stakeholders responding to the growing threat of artemisinin resistance, including scientists from malarious countries in peril. This conference encouraged and enabled experts to share their recent unpublished data from studies that may improve our understanding of artemisinin resistance. Conference sessions addressed research priorities to forestall artemisinin resistance and fostered collaborations between field- and laboratory-based researchers and international programs, with the aim of translating new scientific evidence into public health solutions. Inspired by this conference, this review summarizes novel findings and perspectives on artemisinin resistance, approaches for translating research data into relevant public health information, and opportunities for interdisciplinary collaboration to combat artemisinin resistance
Individual and combined effects of transient drought and heat stress on carbon assimilation and seed filling in chickpea
High temperatures and decreased rainfall are detrimental to yield in chickpea (Cicer arietinum L.), particularly during grain filling. This study aimed to (i) assess the individual and combined effects of drought and heat stress on biochemical seed-filling processes, (ii) determine genotypic differences in heat and drought tolerance, and (iii) determine any cross-tolerance. Plants were grown outdoors in the normal growing season when temperatures during seed filling were 32-20°C; heat stress). Half of the pots were kept adequately watered throughout, but water was withheld from the others from the initiation of seed filling until the relative leaf water content reached 50% of the irrigated plants (drought stress); all plants were rewatered thereafter until seed maturit. Water was withheld for 13 days (normal sowing) and 7 days (late sowing), so soil moisture decreased by 54–57%. Tests on leaves and seeds were performed after the stress. Individual and combined stress damaged membranes, and decreased cellular oxidising ability, stomatal conductance, PSII function and leaf chlorophyll content; damage was greater under combined stress. Leaf Rubisco activity increased with heat stress, decreased with drought stress and decreased severely with combined stress. Sucrose and starch concentrations decreased in all seeds through reductions in biosynthetic enzymes; reductions were greater under combined stress. These effects were more severe in heat- and drought-sensitive genotypes compared with drought-tolerant genotypes. Drought stress had a greater effect than heat stress on yield and the biochemical seed-filling mechanisms. Drought- and heat-tolerant genotypes showed partial cross-toleranc
Effects of individual and combined heat and drought stress during seed filling on the oxidative metabolism and yield of chickpea (Cicer arietinum) genotypes differing in heat and drought tolerance
Drought and heat stress are two major constraints that limit chickpea (Cicer arietinum L.) yield, particularly during seed filling. The present study aimed (i) to assess the individual and combined effects of drought and heat stress on oxidative metabolism during seed filling, and (ii) to determine any genetic variation in oxidative metabolism among genotypes differing in drought and heat tolerance and sensitivity. The plants were raised in outdoor conditions with two different times of sowing, one in November (normal-sown, temperatures 32°C−20°C (day–night) during seed filling). Plants were regularly irrigated to prevent any water shortage until the water treatments were applied. At both sowing times, the drought treatment was applied during seed filling (at ∼75% podding) by withholding water from half of the pots until the relative leaf water content (RLWC) of leaves on the top three branches reached 42–45%, whereas leaves in the fully irrigated control plants were maintained at RLWC 85–90%. Drought-stressed plants were then rewatered and maintained under fully irrigated conditions until maturity. Several biochemical parameters were measured on the leaves and seeds at the end of the stress treatments, and seed yield and aboveground biomass were measured at maturity. Individual and combined stresses damaged membranes, and decreased PSII function and leaf chlorophyll content, more so under the combined stress treatment. The levels of oxidative molecules (malondialdehyde (MDA) and H2O2) markedly increased compared with the control plants in all stress treatments, especially across genotypes in the combined heat + drought stress treatment (increases in leaves: MDA 5.4–8.4-fold and H2O2 5.1–7.1-fold; in seeds: MDA 1.9–3.3-fold and H2O2 3.8–7.9-fold). The enzymatic and non-enzymatic antioxidants related to oxidative metabolism increased under individual stress treatments but decreased in the combined heat + drought stress treatment. Leaves had higher oxidative damage than seeds, and this likely inhibited their photosynthetic efficiency. Yields were reduced more by drought stress than by heat stress, with the lowest yields in the combined heat + drought stress treatment. Heat- and drought-tolerant genotypes suffered less damage and had higher yields than the heat- and drought-sensitive genotypes under the individual and combined stress treatments, suggesting partial cross-tolerance in these genotypes. A drought-tolerant genotype ICC8950 produced more seed yield under the combined heat + drought stress than other genotypes, and this was associated with low oxidative damage in leaves and seeds
Transformation of ε-HBCD with the Sphingobium Indicum enzymes LinA1, LinA2 and LinATM, a triple mutant of LinA2
Hexabromocyclododecanes (HBCDs) were used as flame-retardants until their ban in 2013. Among the 16 stereoisomers known, ε-HBCD has the highest symmetry. This makes ε-HBCD an interesting substrate to study the selectivity of biotransformations. We expressed three LinA dehydrohalogenase enzymes in E. coli bacteria, two wild-type, originating from Sphingobium indicum B90A bacteria and LinATM, a triple mutant of LinA2, with mutations of L96C, F113Y and T133 M. These enzymes are involved in the hexachlorocyclohexane (HCH) metabolism, specifically of the insecticide γ-HCH (Lindane). We studied the reactivity of those eight HBCD stereoisomers found in technical HBCD. Furthermore, we compared kinetics and selectivity of these LinA variants with respect to ε-HBCD. LC-MS data indicate that all enzymes converted ε-HBCD to pentabromocyclododecenes (PBCDens). Transformations followed Michaelis-Menten kinetics. Rate constants kcat and enzyme specificities kcat/KM indicate that ε-HBCD conversion was fastest and most specific with LinA2. Only one PBCDen stereoisomer was formed by LinA2, while LinA1 and LinATM produced mixtures of two PBCDE enantiomers at three times lower rates than LinA2. In analogy to the biotransformation of (-)β-HBCD, with selective conversion of dibromides in R-S-configuration, we assume that 1E,5S,6R,9S,10R-PBCDen is the ε-HBCD transformation product from LinA2. Implementing three amino acids of the LinA1 substrate-binding site into LinA2 resulted in a triple mutant with similar kinetics and product specificity like LinA1. Thus, point-directed mutagenesis is an interesting tool to modify the substrate- and product-specificity of LinA enzymes and enlarge their scope to metabolize other halogenated persistent organic pollutants regulated under the Stockholm Convention
Journal Staff
We present the first measurements of the differential cross section d sigma/dp(T)(gamma) for the production of an isolated photon in association with at least two b-quark jets. The measurements consider photons with rapidities vertical bar y(gamma)vertical bar < 1.0 and transverse momenta 30 < p(T)(gamma) < 200 GeV. The b-quark jets are required to have p(T)(jet) > 15 GeVand vertical bar y(jet)vertical bar < 1.5. The ratio of differential production cross sections for gamma + 2 b-jets to gamma + b-jet as a function of p(T)(gamma) is also presented. The results are based on the proton-antiproton collision data at root s = 1.96 TeV collected with the D0 detector at the Fermilab Tevatron Collider. The measured cross sections and their ratios are compared to the next- to- leading order perturbative QCD calculations as well as predictions based on the k(T)- factorization approach and those from the sherpa and pythia Monte Carlo event generators
- …