Graphene Gold Nanoparticle Hybrid Based Near Infrared Photodetector

This paper presents novel and simplistic approach towards the development of graphene based near infrared (NIR) photodetectors. The developed device comprises of Au nanoparticles integrated within the channel of the back-gated graphene field effect transistors. The introduction of Au nanoparticles enhanced response of the device under IR illumination due improved NIR absorption. Further, dynamic response of the device under IR illumination is presented. This study will trigger the development of novel hybrid graphene device for graphene based photodetectors in IR regime

Tuning Electrical Conductivity of CNT-PDMS Nanocomposites for Flexible Electronic Applications

This paper presents a study into the electrical conductivity of multi-wall carbon nanotube-polydimethylsiloxane (MWNT-PDMS) nanocomposite and their dependence on the filler concentration. It is observed that the electrical conductivity of the composites can be tailored by altering the filler concentration. Accordingly, the nanocomposites with filler weight ratio ranging from 1% to 8% were prepared and tested. Finally, the significance of results presented here for flexible pressure sensors and stretchable interconnects for electronic skin applications have been discussed

Local dynamics of topological magnetic defects in the itinerant helimagnet FeGe

Chiral magnetic interactions induce complex spin textures including helical and conical spin waves, as well as particle-like objects such as magnetic skyrmions and merons. These spin textures are the basis for innovative device paradigms and give rise to exotic topological phenomena, thus being of interest for both applied and fundamental sciences. Present key questions address the dynamics of the spin system and emergent topological defects. Here we analyze the micromagnetic dynamics in the helimagnetic phase of FeGe. By combining magnetic force microscopy, single-spin magnetometry, and Landau-Lifschitz-Gilbert simulations we show that the nanoscale dynamics are governed by the depinning and subsequent motion of magnetic edge dislocations. The motion of these topologically stable objects triggers perturbations that can propagate over mesoscopic length scales. The observation of stochastic instabilities in the micromagnetic structure provides new insight to the spatio-temporal dynamics of itinerant helimagnets and topological defects, and discloses novel challenges regarding their technological usage

Development of multi-depth probing 3D microelectrode array to record electrophysiological activity within neural cultures

Microelectrode arrays (MEAs) play a crucial role in investigating the electrophysiological activities of neuronal populations. Although two-dimensional neuronal cell cultures have predominated in neurophysiology in monitoring in-vitro the electrophysiological activity, recent research shifted toward culture using three-dimensional (3D) neuronal network structures for developing more sophisticated and realistic neuronal models. Nevertheless, many challenges remain in the electrophysiological analysis of 3D neuron cultures, among them the development of robust platforms for investigating the electrophysiological signal at multiple depths of the 3D neurons’ networks. While various 3D MEAs have been developed to probe specific depths within the layered nervous system, the fabrication of microelectrodes with different heights, capable of probing neural activity from the surface as well as from the different layers within the neural construct, remains challenging. This study presents a novel 3D MEA with microelectrodes of different heights, realized through a multi-stage mold-assisted electrodeposition process. Our pioneering platform allows meticulous control over the height of individual microelectrodes as well as the array topology, paving the way for the fabrication of 3D MEAs consisting of electrodes with multiple heights that could be tailored for specific applications and experiments. The device performance was characterized by measuring electrochemical impedance, and noise, and capturing spontaneous electrophysiological activity from neurospheroids derived from human induced pluripotent stem cells. These evaluations unequivocally validated the significant potential of our innovative multi-height 3D MEA as an avant-garde platform for in vitro 3D neuronal studies

An enhanced platform for cell electroporation: controlled delivery and electrodes functionalization

n/

Piezoelectric graphene field effect transistor pressure sensors for tactile sensing

This paper presents graphene field-effect transistor (GFET) based pressure sensors for tactile sensing. The sensing device comprises GFET connected with a piezoelectric metal-insulator-metal (MIM) capacitor in an extended gate configuration. The application of pressure on MIM generates a piezo-potential which modulates the channel current of GFET. The fabricated pressure sensor was tested over a range of 23.54–94.18 kPa, and it exhibits a sensitivity of 4.55 × 10−3 kPa−1. Further, the low voltage (∼100 mV) operation of the presented pressure sensors makes them ideal for wearable electronic applications

Flexible FETs using ultrathin Si microwires embedded in solution processed dielectric and metal layers

This work presents a novel manufacturing route for obtaining high performance bendable field effect transistors (FET) by embedding silicon (Si) microwires (2.5 μm thick) in layers of solution-processed dielectric and metallic layers. The objective of this study is to explore heterogeneous integration of Si with polymers and to exploit the benefits of both microelectronics and printing technologies. Arrays of Si microwires are developed on silicon on insulator (SOI) wafers and transfer printed to polyimide (PI) substrate through a polydimethylsiloxane (PDMS) carrier stamp. Following the transfer printing of Si microwires, two different processing steps were developed to obtain top gate top contact and back gate top contact FETs. Electrical characterizations indicate devices having mobility as high as 117.5 cm2 V−1 s−1. The fabricated devices were also modeled using SILVACO Atlas. Simulation results show a trend in the electrical response similar to that of experimental results. In addition, a cyclic test was performed to demonstrate the reliability and mechanical robustness of the Si μ-wires on flexible substrates

Functionalized microelectrodes arrays with integrated microfluidic channels for single-site multiple

Nowadays, different chemical and physical transfection techniques are used to delivery biomolecules of interest (e.g. DNA, RNA, proteins) into cells. Among the physical methods, electroporation generates transient pores in the plasma membrane by applying electrical pulses to suspended cells. One of its main limitations is the lack of spatio-temporal control over the process: it does not allow to select single cells (desirable requirement especially in highly heterogeneous tissues), and to monitor the transfection results in real-time. To circumvent these disadvantages, alternative microscale approaches are increasingly required. This work presents an integrated platform consisting of a gold microelectrode array (MEA) for singlesite electroporation and fluidic channels for controlled delivery of bio-chemical entities . In order to improve the efficiency of electroporation, the gold electrodes were coated with a thin film of nanostructured of Titanium Dioxide

New materials and advances in making electronic skin for interactive robots

Flexible electronics has huge potential to bring revolution in robotics and prosthetics as well as to bring about the next big evolution in electronics industry. In robotics and related applications, it is expected to revolutionise the way with which machines interact with humans, real-world objects and the environment. For example, the conformable electronic or tactile skin on robot’s body, enabled by advances in flexible electronics, will allow safe robotic interaction during physical contact of robot with various objects. Developing a conformable, bendable and stretchable electronic system requires distributing electronics over large non-planar surfaces and movable components. The current research focus in this direction is marked by the use of novel materials or by the smart engineering of the traditional materials to develop new sensors, electronics on substrates that can be wrapped around curved surfaces. Attempts are being made to achieve flexibility/stretchability in e-skin while retaining a reliable operation. This review provides insight into various materials that have been used in the development of flexible electronics primarily for e-skin applications

Garbage in, garbage out: how reliable training data improved a virtual screening approach against SARS-CoV-2 MPro

Introduction: The identification of chemical compounds that interfere with SARS-CoV-2 replication continues to be a priority in several academic and pharmaceutical laboratories. Computational tools and approaches have the power to integrate, process and analyze multiple data in a short time. However, these initiatives may yield unrealistic results if the applied models are not inferred from reliable data and the resulting predictions are not confirmed by experimental evidence.Methods: We undertook a drug discovery campaign against the essential major protease (MPro) from SARS-CoV-2, which relied on an in silico search strategy –performed in a large and diverse chemolibrary– complemented by experimental validation. The computational method comprises a recently reported ligand-based approach developed upon refinement/learning cycles, and structure-based approximations. Search models were applied to both retrospective (in silico) and prospective (experimentally confirmed) screening.Results: The first generation of ligand-based models were fed by data, which to a great extent, had not been published in peer-reviewed articles. The first screening campaign performed with 188 compounds (46 in silico hits and 100 analogues, and 40 unrelated compounds: flavonols and pyrazoles) yielded three hits against MPro (IC50 ≤ 25 μM): two analogues of in silico hits (one glycoside and one benzo-thiazol) and one flavonol. A second generation of ligand-based models was developed based on this negative information and newly published peer-reviewed data for MPro inhibitors. This led to 43 new hit candidates belonging to different chemical families. From 45 compounds (28 in silico hits and 17 related analogues) tested in the second screening campaign, eight inhibited MPro with IC50 = 0.12–20 μM and five of them also impaired the proliferation of SARS-CoV-2 in Vero cells (EC50 7–45 μM).Discussion: Our study provides an example of a virtuous loop between computational and experimental approaches applied to target-focused drug discovery against a major and global pathogen, reaffirming the well-known “garbage in, garbage out” machine learning principle