Measurement of the invariant mass distributions for the pp -> ppeta' reaction at excess energy of Q = 16.4 MeV

The proton-proton and proton-eta' invariant mass distributions have been determined for the pp -> ppeta' reaction at an excess energy of Q = 16.4 MeV. The measurement was carried out using the COSY-11 detector setup and the proton beam of the cooler synchrotron COSY. The shapes of the determined invariant mass distributions are similar to those of the pp -> ppeta reaction and reveal an enhancement for large relative proton-proton momenta. This result, together with the fact that the proton-eta interaction is much stronger that the proton-eta' interaction, excludes the hypothesis that the observed enhancement is caused by the interaction between the proton and the meson

Kaon pair production close to threshold

The total cross section of the reaction pp->ppK+K- has been measured at excess energies Q=10 MeV and 28 MeV with the magnetic spectrometer COSY-11. The new data show a significant enhancement of the total cross section compared to pure phase space expectations or calculations within a one boson exchange model. In addition, we present invariant mass spectra of two particle subsystems. While the K+K- system is rather constant for different invariant masses, there is an enhancement in the pK- system towards lower masses which could at least be partially connected to the influence of the Lambda(1405) resonance.Comment: accepted for publication in Phys. Lett.

Beam profile investigation of the new collimator system for the J-PET detector

Jagiellonian Positron Emission Tomograph (J-PET) is a multi-purpose detector which will be used for search for discrete symmetries violations in the decays of positronium atoms and for investigations with positronium atoms in life-sciences and medical diagnostics. In this article we present three methods for determination of the beam profile of collimated annihilation gamma quanta. Precise monitoring of this profile is essential for time and energy calibration of the J-PET detector and for the determination of the library of model signals used in the hit-time and hit-position reconstruction. We have we have shown that usage of two lead bricks with dimensions of 5x10x20 cm^3 enables to form a beam of annihilation quanta with Gaussian profile characterized by 1 mm FWHM. Determination of this characteristic is essential for designing and construction the collimator system for the 24-module J-PET prototype. Simulations of the beam profile for different collimator dimensions were performed. This allowed us to choose optimal collimation system in terms of the beam profile parameters, dimensions and weight of the collimator taking into account the design of the 24 module J-PET detector.Comment: 14 pages, 9 figure

Eta physics at threshold

The production of eta and eta-prime mesons in elementary nucleon-nucleon collisions has been investigated at the synchrotrons CELSIUS, COSY and SATURNE. The magnitude and energy dependence of the total cross section as well as the occupation distribution of the phase space serve as observables for investigating the mechanisms underlying the production processes and the interaction of mesons with nucleons. The precise data on the eta and eta-prime creation via the pp --> pp eta(eta-prime) reactions allowed to settle the general features of the eta and eta-prime meson production and revealed the sensitivity of the mentioned observables to the nucleon-nucleon-meson final state interaction. The particular production properties, like for example the determination of the dominating exchange processes which lead to the excitation of the S_11 nucleon isobar in the case of eta creation, must be established by confrontation with other observables. The present status of this investigation with an emphasis on the results of the COSY-11 collaboration is briefly presented. The available data are interpreted in view of the production mechanism and the meson-nucleon interaction.Comment: 3 pages, 3 figures, Presented at Conference on Quarks and Nuclear Physics (QNP 2002), Julich, Germany, 9-14 Jun 200

Drift chamber with a c-shaped frame

We present the construction of a planar drift chamber with wires stretched between two arms of a c-shaped aluminium frame. The special shape of the frame allows to extendthe momentum acceptance of the COSY-11 detection system towards lower momenta without suppressing the high momentum particles. The proposed design allows for construction of tracking detectors covering small angles with respect to the beam, which can be installed and removed without dismounting the beam-pipe. For a three-dimensional track reconstruction a computer code was developed using a simple algorithm of hit preselection.Comment: submitted to Nucl. Instr. & Meth

A method to disentangle single- and multi-meson production in missing mass spectra from quasi-free pn --> pn X reactions

The separation of contributions from multi- and single-meson production in the missing mass spectrum of the quasi-free pn --> pnX reaction constitutes a~challenging task when the reaction is studied close to threshold. This is especially true if the resolution of the mass determination is comparable with the excess energy and if the investigated signal appears close to the kinematical limit. In this article we outline a method which permits the extraction of the signal originating from the creation of a single meson without the necessity of conducting model-dependent simulations. For the pd --> pnXp(spectator) reactions, the method allows one to combine events corresponding to multi-meson production at various excess energies with respect to the pn --> pn meson process, and hence leads to an increase of the statistics needed for the determination of the shape of the multi-meson background. As an example of the application of the method, we demonstrate that the evaluation of the data from the pd --> pnXp(sp) process according to the described technique enables one to extract a signal of the pn --> pn eta reaction whose shape is consistent with expectations, supporting the correctness and usefulness of the method introduced.Comment: 14 pages, 10 figure

Phenomenology of pp->pp eta reaction close to threshold

The recent high statistics measurement of the pp -> pp eta reaction at an excess energy Q=15.5 MeV has been analysed by means of partial wave decomposition of the cross section. Guided by the dominance of the final state 1S0 pp interaction (FSI), we keep only terms involving the FSI enhancement factor. The measured p-p and p-eta effective mass spectra can be well reproduced by lifting the standard on-shell approximation in the enhancement factor and by allowing for a linear energy dependence in the leading 3P0->1S0,s partial wave amplitude. Higher partial waves seem to play only a marginal role

Measurement of the dp -->3He eta reaction near threshold

Total and differential cross sections for the dp --> 3He eta reaction have been measured near threshold for 3He center-of-mass momenta in the range from 17.1 MeV/c to 87.5 MeV/c. The data were taken during a slow ramping of the COSY internal deuteron beam scattered on a proton target detecting the 3He ejectiles with the COSY-11 facility. The forward-backward asymmetries of the differential cross sections deviate clearly from zero for center-of-mass momenta above 50 MeV/c indicating the presence of higher partial waves in the final state. Below 50 MeV/c center-of-mass momenta a fit of the final state enhancement factor to the data of the total cross sections results in the 3He eta scattering length of a = |2.9 +/- 0.6| + i (3.2 +/- 0.4) fm

Time resolution of the plastic scintillator strips with matrix photomultiplier readout for J-PET tomograph

Recent tests of a single module of the Jagiellonian Positron Emission Tomography system (J-PET) consisting of 30 cm long plastic scintillator strips have proven its applicability for the detection of annihilation quanta (0.511 MeV) with a coincidence resolving time (CRT) of 0.266 ns. The achieved resolution is almost by a factor of two better with respect to the current TOF-PET detectors and it can still be improved since, as it is shown in this article, the intrinsic limit of time resolution for the determination of time of the interaction of 0.511 MeV gamma quanta in plastic scintillators is much lower. As the major point of the article, a method allowing to record timestamps of several photons, at two ends of the scintillator strip, by means of matrix of silicon photomultipliers (SiPM) is introduced. As a result of simulations, conducted with the number of SiPM varying from 4 to 42, it is shown that the improvement of timing resolution saturates with the growing number of photomultipliers, and that the 2 x 5 configuration at two ends allowing to read twenty timestamps, constitutes an optimal solution. The conducted simulations accounted for the emission time distribution, photon transport and absorption inside the scintillator, as well as quantum efficiency and transit time spread of photosensors, and were checked based on the experimental results. Application of the 2 x 5 matrix of SiPM allows for achieving the coincidence resolving time in positron emission tomography of $\approx$ 0.170 ns for 15 cm axial field-of-view (AFOV) and $\approx$ 0.365 ns for 100 cm AFOV. The results open perspectives for construction of a cost-effective TOF-PET scanner with significantly better TOF resolution and larger AFOV with respect to the current TOF-PET modalities.Comment: To be published in Phys. Med. Biol. (26 pages, 17 figures

Determination of the eta'-proton scattering length in free space

Taking advantage of both the high mass resolution of the COSY-11 detector and the high energy resolution of the low-emittance proton-beam of the Cooler Synchrotron COSY we determine the excitation function for the pp --> pp eta' reaction close-to-threshold. Combining these data with previous results we extract the scattering length for the eta'-proton potential in free space to be Re(a_{p eta'}) = 0+-0.43 fm and Im(a_{p eta'}) = 0.37(+0.40)(-0.16) fm.Comment: 5 pages, 3 figures, accepted for publication in Phys. Rev. Let