Distributions of Nobel Metal Pd and Pt in Mesoporous Silica

Mesoporous silicananostructures have been synthesized and loaded with Pd and Pt catalytic noble metals. It is found that Pd forms small nanoclusters (3–5 nm) on the surface of the mesoporous structure whereas Pt impregnation results in the inclusion of Pt nanostructures within the silica hexagonal pores (from nanoclusters to nanowires). It is observed that these materials have high catalyticproperties for CO–CH4CO–CH4CO–CH4 combustion, even in a thick film form. In particular, results indicate that the Pt and Pd dispersed in mesoporous silica are catalytically active as a selective filter for gas sensors

Distributions of Noble Metal Pd and Pt in Mesoporous Silica

Mesoporous silica nanostructures have been synthesized and loaded with Pd and Pt catalytic noble metals. It is found that Pd forms small nanoclusters (3–5 nm) on the surface of the mesoporous structure whereas Pt impregnation results in the inclusion of Pt nanostructures within the silica hexagonal pores (from nanoclusters to nanowires). It is observed that these materials have high catalytic properties for CO–CH4 combustion, even in a thick film form. In particular, results indicate that the Pt and Pd dispersed in mesoporous silica are catalytically active as a selective filter for gas sensors

Surface States in Template Synthesized Tin Oxide Nanoparticles

Tin–oxide nanoparticles with controlled narrow size distributions are synthesized while physically encapsulated inside silica mesoporous templates. By means of ultraviolet-visible spectroscopy, a redshift of the optical absorbance edge is observed. Photoluminescence measurements corroborate the existence of an optical transition at 3.2 eV. The associated band of states in the semiconductor gap is present even on template-synthesized nanopowders calcined at 800 °C, which contrasts with the evolution of the gap states measured on materials obtained by other methods. The gap states are thus considered to be surface localized, disappearing with surface faceting or being hidden by the surface-to-bulk ratio decrease

Synthesis of Tin Oxide Nanostructures with Controlled Particle Size Using Mesoporous Frameworks

Tin oxide nanostructures with controlled narrow particle size distribution were synthesized inside silica mesoporous templates. In this way, particle growth was blocked by physically corseting the tin compound inside the silica frameworks, the pore diameter of which determines the final tin oxide crystallite size distribution. Template structures were subsequently eliminated by chemical methods to collect the unsupported semiconductor nanoparticles. Thus obtained tin oxed nanopowders, with particle sizes in the range between 6 and 10 nm, were structurally, chemically, and electically characterized. The results are compared with those obtained from the characterization of larger crystallite materials

High-power nitrided TiO2 carbon felt as the negative electrode for all-vanadium redox flow batteries

This work describes the design of an electrode with enhanced performance applied to all-vanadium redox flow batteries (VRFBs). This new electrode consists of a structural porous carbon felt decorated with TiO2 rutile nanoparticles, which has been nitrided using ammonolysis at 900 °C. An outstanding charge and mass transfer over the electrode-electrolyte interface was observed as a consequence of the synergetic effect of N- and O-functionalization over carbon felt (CF) and the partial formation of TiN (metallic conductor) phase. Moreover, this material has not only improved in terms of catalysis towards the V3+/V2+ redox reaction (k0 = 1.6 × 10−3 cm s−1), but also inhibited the hydrogen evolution reaction (HER), which is one of the main causes of imbalances that lead to battery failure. This led to an impressive high-power peak output value up to 700 mW cm−2, as well as work at high current density in galvanostatic conditions (i.e. 150 mA cm−2), exhibiting low ohmic losses (overpotential) and great redox single cell reversibility, with a superior energy efficiency of 71%. An inexpensive, earth abundant and scalable synthesis method to boost VRFBs technology based on nitrided CF@TiO2 is presented, being able to overcome certain constrains, and therefore to achieve high energy and power densities

Copper oxide nanowires prepared by thermal oxidation for chemical sensing

n/

Efeitos de doses e formas de aplicação de reguladores de crescimento em uvas sem sementes, cv. BRS Clara, em região tropical.

O objetivo deste trabalho foi avaliar o efeito do uso dos reguladores vegetais, ácido giberélico e tidiazuron, no tamanho de bagas da cultivar BRS Clara em Região Tropical. Os experimentos foram conduzidos em 2006 e 2007, na Estação Experimental de Viticultura Tropical, em Jales-SP, região noroeste do Estado de São Paulo, em plantas da cv. BRS Clara. Foram testadas diferentes concentrações de GA3 aplicadas isoladamente, combinadas com Crop Set ou tidiazuron, em aplicações únicas ou sequênciais (2 e 4 vezes). As avaliações foram feitas por ocasião da maturação das uvas, considerando-se a massa fresca dos cachos, dos engaços e das bagas, determinadas por meio de balança analítica; o comprimento e o diâmetro médio das bagas, utilizando-se de paquímetro; e o teor de sólidos solúveis (SS), por meio de refratômetro manual. Os experimentos foram conduzidos em delineamento experimental de blocos casualizados, representados por uma planta, com 15 repetições, no ano de 2006, e 10 repetições, no ano de 2007. Os dados foram submetidos à análise de variância e, para a comparação das médias dos tratamentos, foi utilizado o teste Skott Nott, ao nível de 5% de probabilidade. Observou-se que o uso dos reguladores promoveu o crescimento das bagas na cultivar BRS Clara em todos os tratamentos, diferindo da testemunh

Synthesis and gas-sensing properties of pd-doped SnO2 nanocrystals. A case study of a general methodology for doping metal oxide nanocrystals

Pd-modified SnO2 nanocrystals, with a Pd/Sn nominal atomic ratio of 0.025, were prepared by injecting SnO2 sols and a Pd precursor solution into tetradecene and dodecylamine at 160 degrees C. Two different doping procedures were investigated: in co-injection, a Pd acetylacetonate solution in chloroform was mixed with the SnO2 sol before the injection; in sequential injection, the Pd solution was injected separately after the SnO2 sol. The obtained suspensions were heated at the resulting 80 degrees C temperature, then the product was collected by centrifugation and dried at 80 degrees C. When using co-injection, in the dried products PdO and Pd nanoparticles were observed by high-resolution transmission electron microscopy. Only SnO2 nanocrystals were observed in dried products prepared by sequential injection. After heat-treatment at 500 degrees C, no Pd species were observed for both doping procedures. Moreover, X-ray photoelectron spectroscopy showed that, in both the doping procedures, after heat-treatment Pd is distributed only into the SnO2 nanocrystal structure. This conclusion was reinforced by the measurement of the electrical properties of Pd-doped nanocrystals, showing a remarkable increase of the electrical resistance if compared with pure SnO2 nanocrystals. This result was interpreted as Pd insertion as a dopant inside the cassiterite lattice of tin dioxide. The addition of Pd resulted in a remarkable improvement of the gas-sensing properties, allowing the detection of carbon monoxide concentrations below 50 ppm and of very low concentrations (below 25 ppm) of other reducing gases such as ethanol and acetone

Assessment of modular construction for safety-related structures at advanced nuclear power plants

Modular construction techniques have been successfully used in a number of industries, both domestically and internationally. Recently, the use of structural modules has been proposed for advanced nuclear power plants. The objective in utilizing modular construction is to reduce the construction schedule, reduce construction costs, and improve the quality of construction. This report documents the results of a program which evaluated the proposed use of modular construction for safety-related structures in advanced nuclear power plant designs. The program included review of current modular construction technology, development of licensing review criteria for modular construction, and initial validation of currently available analytical techniques applied to concrete-filled steel structural modules. The program was conducted in three phases. The objective of the first phase was to identify the technical issues and the need for further study in order to support NRC licensing review activities. The two key findings were the need for supplementary review criteria to augment the Standard Review Plan and the need for verified design/analysis methodology for unique types of modules, such as the concrete-filled steel module. In the second phase of this program, Modular Construction Review Criteria were developed to provide guidance for licensing reviews. In the third phase, an analysis effort was conducted to determine if currently available finite element analysis techniques can be used to predict the response of concrete-filled steel modules