Intimate partner violence and utilization of maternal health care services in Addis Ababa, Ethiopia

published_or_final_versio

Evaluation of the tear strength, compressive resistance, and surface hardness of three commercially available bite registration materials: an in vitro study

Background: For making a successful prosthesis, it is essential to achieve harmony between the maxillomandibular relationship. The precision and occlusal quality of the prosthesis partly depends on interocclusal bite registration material. Interocclusal bite registration material plays an important role in recording and transferring of existing patient’s occlusal records. The procedure used to record and transfer interocclusal relation should be performed with the utmost care and understanding to prevent clinical error. Aim: This study aimed to evaluate the tear strength, compressive resistance and surface hardness of three commercially available bite registration materials. Material and Methods: Three types of commercially available bite registration materials, Bis-acrylate (BA), Polyvinylsiloxane (PVS), and Polyether (PE), were made in Dumbbell and cylindrical shaped samples to evaluate the tear strength and compressive resistance, respectively and were analysed using the universal testing machine. The surface hardness was assessed using a microhardness tester. The obtained data were subjected to statistical analysis using SPSS 16.0 version (Chicago, Inc., USA). ANOVA/Kruskal-Wallis test was used to compare study parameters among the groups. Tukey’s posthoc test was used for inter-group comparisons. Results: Bis-Acrylate exhibited the greatest tear strength, followed by Polyvinylsiloxane and Polyether showed the least tear strength. More compressive resistance was observed in Polyether followed by Bis-Acrylate and lowest in Polyvinylsiloxane. A similar pattern was seen in the surface hardness among the three materials. Conclusion: Bis-acrylate showed greater tear strength and surface hardness, and it can be considered a better bite registration material

Invisible Diaspora?:English Ethnicity in the United States before 1920

The article presents an examination into the English population of the United States during the 19th and early 20th centuries, examining their ethnic identity as a diaspora community. Introductory details are given noting the relative lack of attention given to English Americans as an ethnic group. Topics addressed include reasons behind the invisibility of the English immigrant identity in the U.S., the existence of English ethnic organizations, and an overview of their activities

Solidification Enhancement in a Triple-Tube Latent Heat Energy Storage System Using Twisted Fins

Copyright: © 2021 by the authors. This work evaluates the influence of combining twisted fins in a triple-tube heat exchanger utilised for latent heat thermal energy storage (LHTES) in three-dimensional numerical simulation and comparing the outcome with the cases of the straight fins and no fins. The phase change material (PCM) is in the annulus between the inner and the outer tube, these tubes include a cold fluid that flows in the counter current path, to solidify the PCM and release the heat storage energy. The performance of the unit was assessed based on the liquid fraction and temperature profiles as well as solidification and the energy storage rate. This study aims to find suitable and efficient fins number and the optimum values of the Re and the inlet temperature of the heat transfer fluid. The outcomes stated the benefits of using twisted fins related to those cases of straight fins and the no-fins. The impact of multi-twisted fins was also considered to detect their influences on the solidification process. The outcomes reveal that the operation of four twisted fins decreased the solidification time by 12.7% and 22.9% compared with four straight fins and the no-fins cases, respectively. Four twisted fins improved the discharging rate by 12.4% and 22.8% compared with the cases of four straight fins and no-fins, respectively. Besides, by reducing the fins’ number from six to four and two, the solidification time reduces by 11.9% and 25.6%, respectively. The current work shows the impacts of innovative designs of fins in the LHTES to produce novel inventions for commercialisation, besides saving the power grid.Jiangsu Provincial Basic Research Program (Natural Science Fund); Natural Science Research Project of Jiangsu Province Colleges and Universities; Philosophy and Social Science Project of Jiangsu Province Colleges and Universitie

Design of a Load Frequency Controller Based on an Optimal Neural Network

Data Availability Statement: Not applicable.A load frequency controller (LFC) is a crucial part in the distribution of a power system network (PSN) to restore its frequency response when the load demand is changed rapidly. In this paper, an artificial neural network (ANN) technique is utilised to design the optimal LFC. However, the training of the optimal ANN model for a multi-area PSN is a major challenge due to its variations in the load demand. To address this challenge, a particle swarm optimization is used to distribute the nodes of a hidden layer and to optimise the initial neurons of the ANN model, resulting in obtaining the lower mean square error of the ANN model. Hence, the mean square error and the number of epochs of the ANN model are minimised to about 9.3886 × 10−8 and 25, respectively. To assess this proposal, a MATLAB/Simulink model of the PSN is developed for the single-area PSN and multi-area PSN. The results show that the LFC based on the optimal ANN is more effective for adjusting the frequency level and improves the power delivery of the multi-area PSN comparison with the single-area PSN. Moreover, it is the most reliable for avoiding the fault condition whilst achieving the lowest time multiplied absolute error about 3.45 s when compared with the conventional ANN and PID methods.Funding: This research received no external funding

Natural Convection Effect on Solidification Enhancement in a Multi-Tube Latent Heat Storage System: Effect of Tubes’ Arrangement

Copyright: © 2021 by the authors. The solidification process in a multi-tube latent heat energy system is affected by the natural convection and the arrangement of heat exchanger tubes, which changes the buoyancy effect as well. In the current work, the effect of the arrangement of the tubes in a multi-tube heat exchanger was examined during the solidification process with the focus on the natural convection effects inside the phase change material (PCM). The behavior of the system was numerically analyzed using liquid fraction and energy released, as well as temperature, velocity and streamline profiles for different studied cases. The arrangement of the tubes, considering seven pipes in the symmetrical condition, are assumed at different positions in the system, including uniform distribution of the tubes as well as non-uniform distribution, i.e., tubes concentrated at the bottom, middle and the top of the PCM shell. The model was first validated compared with previous experimental work from the literature. The results show that the heat rate removal from the PCM after 16 h was 52.89 W (max) and 14.85 W (min) for the cases of uniform tube distribution and tubes concentrated at the bottom, respectively, for the proposed dimensions of the heat exchanger. The heat rate removal of the system with uniform tube distribution increases when the distance between the tubes and top of the shell reduces, and increased equal to 68.75 W due to natural convection effect. The heat release rate also reduces by increasing the temperature the tubes. The heat removal rate increases by 7.5%, and 23.7% when the temperature increases from 10 °C to 15 °C and 20 °C, respectively. This paper reveals that specific consideration to the arrangement of the tubes should be made to enhance the heat recovery process attending natural convection effects in phase change heat storage systems

Validation of Endogenous Control Genes for Gene Expression Studies on Human Ocular Surface Epithelium

PURPOSE: To evaluate a panel of ten known endogenous control genes (ECG) with quantitative reverse transcription PCR (qPCR), for identification of stably expressed endogenous control genes in the ocular surface (OS) epithelial regions including cornea, limbus, limbal epithelial crypt and conjunctiva to normalise the quantitative reverse transcription PCR data of genes of interest expressed in above-mentioned regions. METHOD: The lasermicrodissected (LMD) OS epithelial regions of cryosectioned corneoscleral buttons from the cadaver eyes were processed for RNA extraction and cDNA synthesis to detect genes of interest with qPCR. Gene expression of 10 known ECG--glyceraldehyde-3-phosphate dehydrogenase (GAPDH), beta actin (ACTB), peptidylprolyl isomerase (PPIA), TATA-box binding protein (TBP1), hypoxanthine guanine phosphoribosyl transferase (HPRT1), beta glucuronidase (GUSB), Eucaryotic 18S ribosomal RNA (18S), phosphoglycerate kinase (PGK1), beta-2-microglobulin (B2M), ribosomal protein, large, P0 (RPLP0)--was measured in the OS epithelial regions by qPCR method and the data collected was further analysed using geNorm software. RESULTS: The expression stability of ecgs in the os epithelial regions in increasing order as determined with genorm software is as follows: ACTB<18S<TBP<B2M<PGK1<HPRT1<GUSB<GAPDH<PPIA-RPLP0. In this study, geNorm analysis has shown the following ECGs pairs to be most stably expressed in individual OS epithelial regions: HPRT1-TBP in cornea, GUSB-PPIA in limbus, B2M-PPIA and RPLP0-TBP in LEC and conjunctiva respectively. However, across the entire ocular surface including all the regions mentioned above, PPIA-RPLP0 pair was shown to be most stable. CONCLUSION: This study has identified stably expressed ECGs on the OS epithelial regions for effective qPCR results in genes of interest. The results from this study are broadly applicable to quantitative reverse transcription PCR studies on human OS epithelium and provide evidence for the use of PPIA-RPLP0 ECGs pair in quantitative reverse transcription PCR across the OS epithelium

Investigation of heat transfer enhancement in a triple tube latent heat storage system using circular fins with inline and staggered arrangements

Copyright: © 2021 by the authors. Inherent fluctuations in the availability of energy from renewables, particularly solar, remain a substantial impediment to their widespread deployment worldwide. Employing phasechange materials (PCMs) as media, saving energy for later consumption, offers a promising solution for overcoming the problem. However, the heat conductivities of most PCMs are limited, which severely limits the energy storage potential of these materials. This study suggests employing circular fins with staggered distribution to achieve improved thermal response rates of PCM in a vertical triple-tube heat exchanger involving two opposite flow streams of the heat-transfer fluid (HTF). Since heat diffusion is not the same at various portions of the PCM unit, different fin configurations, fin dimensions and HTF flow boundary conditions were explored using computational studies of melting in the PCM triple-tube system. Staggered configuration of fin distribution resulted in significant increases in the rates of PCM melting. The results indicate that the melting rate and heat charging rate could be increased by 37.2 and 59.1%, respectively, in the case of staggered distribution. Furthermore, the use of lengthy fins with smaller thickness in the vertical direction of the storage unit resulted in a better positive role of natural convection; thus, faster melting rates were achieved. With fin dimensions of 0.666 mm × 15 mm, the melting rate was found to be increased by 23.6%, when compared to the base case of 2 mm × 5 mm. Finally, it was confirmed that the values of the Reynolds number and inlet temperatures of the HTF had a significant impact on melting time savings when circular fins of staggered distribution were included

CFD analysis on optimizing the annular fin parameters toward an improved storage response in a triple-tube containment system

Due to the low thermal conductivity of the phase change material and low thermal diffusion inside the phase change material, this study seeks to improve the melting response of a triple-tube latent heat storage system via employing annular fins by optimizing their structural parameters, including the fin number, location, and dimensions. Natural convection effects are numerically evaluated considering different numbers and the locations of the fins, including fin numbers of 4, 10, 16, 20, and 30 in a vertical system orientation. The fins are attached to the inner and outer sides of the annulus, accommodating the phase change material between the inner and center tubes. The fins' number and location are identical on both sides of the annulus, and the volume of the fins is the same across all scenarios evaluated. The results show that the higher the number of fins used, the greater the heat communication between the fins and the phase change material layers in charge, resulting in faster melting and a higher rate of heat storage. Due to the limited natural convection effect and lower heat diffusion at the heat exchanger's bottom, an additional fin is added, and its thickness is assessed. The results show that the case with equal fin thickness, that is, both original fins and the new fin, performs the best performance compared with that for the cases with an added fin with thicknesses of 0.5, 1, and 2 mm. Eliminating an extra fin from the base of the system for the case with 30 fins increases the charging time by 53.3%, and reduces the heat storage rate by 44%. The overall melting time for the case with an added fin to the bottom is 1549 s for the case with 30 fins which is 85.8%, 34.2%, 18%, and 8.8% faster than the cases with 4, 10, 16, and 20 fins, respectively. This study reveals that further attention should be given to the position and number of annular fins to optimize the melting mechanism in phase-changing materials-based heat storage systems