1,370 research outputs found
Microstructural characterization and properties of selective laser melted maraging steel with different build directions
A nearly fully dense grade 300 maraging steel was fabricated by selective laser melting (SLM) additive manufacturing with optimum laser parameters. Different heat treatments were elaborately applied based on the detected phase transformation temperatures. Microstructures, precipitation characteristics, residual stress and properties of the as-fabricated and heat-treated SLM parts were systematically characterized and analyzed. The observed submicron grain size (0.31 μm on average) suggests an extremely high cooling rate up to 107 K/s. Massive needle-shaped nanoprecipitates Ni3X (X = Ti, Al, Mo) are clearly present in the martensitic matrix, which accounts for the age hardening. The interfacial relations between the precipitate and matrix are revealed by electron microscopy and illustrated in detail. Strengthening mechanism is explained by Orowan bowing mechanism and coherency strain hardening. Building orientation-based mechanical anisotropy, caused by ‘layer-wise effect’, is also investigated in as-fabricated and heat-treated specimens. The findings reveal that heat treatments not only induce strengthening, but also significantly relieve the residual stress and slightly eliminate the mechanical anisotropy. In addition, comprehensive performance in terms of Charpy impact test, tribological performance, as well as corrosion resistance of the as-fabricated and heat-treated parts are characterized and systematically investigated in comparison with traditionally produced maraging steels as guidance for industry applications
Reconfigurable Optical Interconnections Via Dynamic Computer-Generated Holograms
A system is presented for optically providing one-to-many irregular interconnections, and strength-adjustable many-to-many irregular interconnections which may be provided with strengths (weights) w(sub ij) using multiple laser beams which address multiple holograms and means for combining the beams modified by the holograms to form multiple interconnections, such as a cross-bar switching network. The optical means for interconnection is based on entering a series of complex computer-generated holograms on an electrically addressed spatial light modulator for real-time reconfigurations, thus providing flexibility for interconnection networks for large-scale practical use. By employing multiple sources and holograms, the number of interconnection patterns achieved is increased greatly
Control of the SCOLE configuration using distributed parameter models
A continuum model for the SCOLE configuration has been derived using transfer matrices. Controller designs for distributed parameter systems have been analyzed. Pole-assignment controller design is considered easy to implement but stability is not guaranteed. An explicit transfer function of dynamic controllers has been obtained and no model reduction is required before the controller is realized. One specific LQG controller for continuum models had been derived, but other optimal controllers for more general performances need to be studied
A Study of Using Cepstrogram for Countermeasure Against Replay Attacks
In this paper, we investigate the properties of the cepstrogram and
demonstrate its effectiveness as a powerful feature for countermeasure against
replay attacks. Cepstrum analysis of replay attacks suggests that crucial
information for anti-spoofing against replay attacks may retain in the
cepstrogram. Experimental results on the ASVspoof 2019 physical access (PA)
database demonstrate that, compared with other features, the cepstrogram
dominates in both single and fusion systems when building countermeasures
against replay attacks. Our LCNN-based single and fusion systems with the
cepstrogram feature outperform the corresponding LCNN-based systems without
using the cepstrogram feature and several state-of-the-art (SOTA) single and
fusion systems in the literature.Comment: Submitted to INTERSPEECH 202
HOP llMlNG OF SPLlT STEP AND KINETICS ANALYSIS OF LOWER EXTREMITIES IN BADMINTON START FOOTWORK
The purpose of this study was to compare the split timing, and lower extremity kinetics of badminton players during push-off steps in six directions. Eight collegiate elite male badminton players received the random shot from an opponent in one of six directions. Result: Hop timing was 0.014-0.037 sec after the opponent struck the shuttlecock. The leg that was opposite the movement direction showed significantly greater tower extremity horizontal push-off force than the other leg did. Conclusion: The hop timing of split step simultaneous with the opponent striking the shuttlecock. The leg opposite the movement direction was the main push leg. When lower extremities exhibit the correct pushing direction and reach the peak push off force within 0.3 sec after the opponent strikes the shuttlecock, players should have more effective return in badminton
Phase Matching for Surface Plasmon Enhanced Second Harmonic Generation in a Gold Grating Slab
Surface plasmon enhanced second harmonic generation in gold grating slabs was investigated. The efficiency is analyzed with respect to the phase matching at the fundamental and the second harmonic frequencies. A classical electromagnetic model was developed under the weak nonlinearity approximation and solved by the finite element method. The measured zeroth order transmitted second harmonic intensity was found to be in quantitative agreement with numerical results. It is shown experimentally and numerically that proper phase matching at both frequencies improves the second harmonic efficiency
Indirect Identification of Linear Stochastic Systems with Known Feedback Dynamics
An algorithm is presented for identifying a state-space model of linear stochastic systems operating under known feedback controller. In this algorithm, only the reference input and output of closed-loop data are required. No feedback signal needs to be recorded. The overall closed-loop system dynamics is first identified. Then a recursive formulation is derived to compute the open-loop plant dynamics from the identified closed-loop system dynamics and known feedback controller dynamics. The controller can be a dynamic or constant-gain full-state feedback controller. Numerical simulations and test data of a highly unstable large-gap magnetic suspension system are presented to demonstrate the feasibility of this indirect identification method
Iterative LQG Controller Design Through Closed-Loop Identification
This paper presents an iterative Linear Quadratic Gaussian (LQG) controller design approach for a linear stochastic system with an uncertain open-loop model and unknown noise statistics. This approach consists of closed-loop identification and controller redesign cycles. In each cycle, the closed-loop identification method is used to identify an open-loop model and a steady-state Kalman filter gain from closed-loop input/output test data obtained by using a feedback LQG controller designed from the previous cycle. Then the identified open-loop model is used to redesign the state feedback. The state feedback and the identified Kalman filter gain are used to form an updated LQC controller for the next cycle. This iterative process continues until the updated controller converges. The proposed controller design is demonstrated by numerical simulations and experiments on a highly unstable large-gap magnetic suspension system
Cardiac Health Diagnosis Using Higher Order Spectra and Support Vector Machine
The Electrocardiogram (ECG) is an important bio-signal representing the sum total of millions of cardiac cell depolarization potentials. It contains important insight into the state of health and nature of the disease afflicting the heart. Heart rate variability (HRV) refers to the regulation of the sinoatrial node, the natural pacemaker of the heart by the sympathetic and parasympathetic branches of the autonomic nervous system. The HRV signal can be used as a base signal to observe the heart's functioning. These signals are non-linear and non-stationary in nature. So, higher order spectral (HOS) analysis, which is more suitable for non-linear systems and is robust to noise, was used. An automated intelligent system for the identification of cardiac health is very useful in healthcare technology. In this work, we have extracted seven features from the heart rate signals using HOS and fed them to a support vector machine (SVM) for classification
A tensor-based approach for big data representation and dimensionality reduction
PublishedJournal Article© 2013 IEEE. Variety and veracity are two distinct characteristics of large-scale and heterogeneous data. It has been a great challenge to efficiently represent and process big data with a unified scheme. In this paper, a unified tensor model is proposed to represent the unstructured, semistructured, and structured data. With tensor extension operator, various types of data are represented as subtensors and then are merged to a unified tensor. In order to extract the core tensor which is small but contains valuable information, an incremental high order singular value decomposition (IHOSVD) method is presented. By recursively applying the incremental matrix decomposition algorithm, IHOSVD is able to update the orthogonal bases and compute the new core tensor. Analyzes in terms of time complexity, memory usage, and approximation accuracy of the proposed method are provided in this paper. A case study illustrates that approximate data reconstructed from the core set containing 18% elements can guarantee 93% accuracy in general. Theoretical analyzes and experimental results demonstrate that the proposed unified tensor model and IHOSVD method are efficient for big data representation and dimensionality reduction
- …