Zero-bias conductance peak and Josephson effect in graphene-NbTiN junctions

We report electronic transport measurements of graphene contacted by NbTiN electrodes, which at low temperature remain superconducting up to at least 11 Tesla. In devices with a single superconducting contact, we find a more than twofold enhancement of the conductance at zero bias, which we interpret in terms of reflectionless tunneling. In devices with two superconducting contacts, we observe the Josephson effect, bipolar supercurrents and Fraunhofer patterns.Comment: 6 pages, 5 figure

Layer-Resolved Ultrafast XUV Measurement of Hole Transport in a Ni-TiO2-Si Photoanode

Metal-oxide-semiconductor junctions are central to most electronic and optoelectronic devices. Here, the element-specificity of broadband extreme ultraviolet (XUV) ultrafast pulses is used to measure the charge transport and recombination kinetics in each layer of a Ni-TiO2-Si junction. After photoexcitation of silicon, holes are inferred to transport from Si to Ni ballistically in ~100 fs, resulting in spectral shifts in the Ni M2,3 XUV edge that are characteristic of holes and the absence of holes initially in TiO2. Meanwhile, the electrons are observed to remain on Si. After picoseconds, the transient hole population on Ni is observed to back-diffuse through the TiO2, shifting the Ti spectrum to higher oxidation state, followed by electron-hole recombination at the Si-TiO2 interface and in the Si bulk. Electrical properties, such as the hole diffusion constant in TiO2 and the initial hole mobility in Si, are fit from these transient spectra and match well with values reported previously

Software performance estimation strategies in a system-level design tool

High-level cost and performance estimation, coupled with a fast hardware/software co-simulation framework, is a key enabler to a fast embedded system design cycle. Unfortunately, the problem of deriving such estimates without a detailed implementation available is difficult.In this paper we describe two approaches to solve software cost and performance estimation problem, and how they are used in an embedded system design environment. A source-based approach uses compilation onto a virtual instruction set, and allows one to quickly obtain estimates without the need for a compiler for the target processor. An object-based approach translates the assembler generated by the target compiler to “assembler-level,” functionally equivalent t C. In both cases the code is annotated with timing and other execution related information (e.g., estimated memory accesses) and is used as a precise, yet fast, software simulation model. We contrast the precision and speed of these two techniques comparing them with those obtainable by a state-of-the-art cycle-based processor model

Comparison of Ferments in the Process of Functional Beverage Making

The aim of this study was to compare the main ferments selected to be used in the process of mead making: Saccharomyces cerevisiae yeast and pollen, the latter having been used in ancient times as ferment. It has only been recently that the market has exhibited significant interest in developing foods containing functional ingredients. Honey has been a corollary of hidden nutritional and medicinal value for centuries. Mead is the result of alcoholic fermentation, by mixing different proportions of honey with water and pollen, as a fermentation agent. The fermentation process was monitored by collecting samples periodically and analyzing the alcohol concentration, total extract, the level of fermentation, the pH, as well as the yeast number with the Thoma cell counting chamber. Additionally, physicochemical (acidity and vitamin C) and sensory parameters were determined for the final products. Results and discussion: Pollen-fermented beverages have a higher alcohol concentration than beverages fermented with Saccharomyces cerevisiae, which is explained by the additional intake of carbohydrates induced by the addition of pollen

Changes of carbon-isotope ratios in soil organic matter relative to parent vegetation and site specificity

Investigating the correlation between biodiversity and ecosystem function in natural environments using carbon-isotope composition (δ13C) allows distinguishing the nutrient cycling pattern and anthropogenic effects incorporation in plants and soil processes. The mechanisms behind the isotopic composition of soil organic matter (SOM) and parent vegetation in relation to the context of site-specificity was approached in this work. Formation of SOM can be affected by the presence of a high concentration of heavy metals in soils. Still, no systematic studies were performed in most of the industrial sites to support this hypothesis.  In order to explore this incomplete understood influence, investigation of carbon isotope signatures (d13C) variations in soil organic matter were performed in two industrial areas from Romania (Copșa Mică industrial platform and Baia Sprie mining zone). The current study, also, investigated the C:N ratio variation, as well as the influence of N speciation regarding d13C values of SOM. The decrease in C:N ratio indicated an increasing effect of the microbial products on SOM matter at increasing depth, for both regions, while an increase of the denitrification processes with depth was found for both areas. For the most appropriate depth (20-40 cm), the soil from Baia Sprie region was more enriched in 13C comparing with the soil from Copsa Mica region, and this higher isotope fractionation of SOM might be due to a higher carbon content, respectively a higher nitrogen content of Baia Sprie soil. It was concluded that the SOM of the surface soil in the two investigated regions has an 13C isotopic composition similar to the plant remains from which it was formed, offering an integrated value of plant material, time and the local origin and providing useful markers of tree isotopic composition

Improved survival following surgery and radiation therapy for olfactory neuroblastoma: analysis of the SEER database

<p>Abstract</p> <p>Background</p> <p>Olfactory Neuroblastoma is a rare malignant tumor of the olfactory tract. Reports in the literature comparing treatment modalities for this tumor are limited.</p> <p>Methods</p> <p>The SEER database (1973-2006) was queried by diagnosis code to identify patients with Olfactory Neuroblastoma. Kaplan-Meier was used to estimate survival distributions based on treatment modality. Differences in survival distributions were determined by the log-rank test. A Cox multiple regression analysis was then performed using treatment, race, SEER historic stage, sex, age at diagnosis, year at diagnosis and SEER geographic registry.</p> <p>Results</p> <p>A total of 511 Olfactory Neuroblastoma cases were reported. Five year overall survival, stratified by treatment modality was: 73% for surgery with radiotherapy, 68% for surgery only, 35% for radiotherapy only, and 26% for neither surgery nor radiotherapy. There was a significant difference in overall survival between the four treatment groups (p < 0.01). At ten years, overall survival stratified by treatment modality and stage, there was no significant improvement in survival with the addition of radiation to surgery.</p> <p>Conclusions</p> <p>Best survival results were obtained for surgery with radiotherapy.</p

Toward a Consistent Description of the PNC Experiments in A=18-21 Nuclei

The experimental PNC results in $^{18}$F, $^{19}$F, $^{21}$Ne and the current theoretical analysis show a discrepancy . If one interprets the small limit of the experimentally extracted PNC matrix element for $^{21}$Ne as a destructive interference between the isoscalar and the isovector contribution, then it is difficult to understand why the isovector contribution in $^{18}$F is so small while the isoscalar + isovector contribution in $^{19}$F is relatively large. In order to understand the origin of this discrepancy a comparison of the calculated PNC matrix elements was performed. It is shown that the $^{18}$F and $^{21}$Ne matrix elements contain important contributions from 3$\hbar \omega$ and 4$\hbar \omega$ configuration and that the (0+1)$\hbar \omega$ calculations give distorted results.Comment: REVTEX, 16 pages, 1 postscriptum figure uuencoded and appende

Norm estimates of complex symmetric operators applied to quantum systems

This paper communicates recent results in theory of complex symmetric operators and shows, through two non-trivial examples, their potential usefulness in the study of Schr\"odinger operators. In particular, we propose a formula for computing the norm of a compact complex symmetric operator. This observation is applied to two concrete problems related to quantum mechanical systems. First, we give sharp estimates on the exponential decay of the resolvent and the single-particle density matrix for Schr\"odinger operators with spectral gaps. Second, we provide new ways of evaluating the resolvent norm for Schr\"odinger operators appearing in the complex scaling theory of resonances

Layer-resolved ultrafast extreme ultraviolet measurement of hole transport in a Ni-TiO₂-Si photoanode

Metal oxide semiconductor junctions are central to most electronic and optoelectronic devices, but ultrafast measurements of carrier transport have been limited to device-average measurements. Here, charge transport and recombination kinetics in each layer of a Ni-TiO₂-Si junction is measured using the element specificity of broadband extreme ultraviolet (XUV) ultrafast pulses. After silicon photoexcitation, holes are inferred to transport from Si to Ni ballistically in ~100 fs, resulting in characteristic spectral shifts in the XUV edges. Meanwhile, the electrons remain on Si. After picoseconds, the transient hole population on Ni is observed to back-diffuse through the TiO₂, shifting the Ti spectrum to a higher oxidation state, followed by electron-hole recombination at the Si-TiO₂ interface and in the Si bulk. Electrical properties, such as the hole diffusion constant in TiO₂ and the initial hole mobility in Si, are fit from these transient spectra and match well with values reported previously