Giving a Second Opportunity to Tire Waste: An Alternative Path for the Development of Sustainable Self-Healing Styrene¿Butadiene Rubber Compounds Overcoming the Magic Triangle of Tires

Current regulations demand tires with long lifetime and reduced fuel consumption without sacrificing car safety. However, tire technology still needs to reach a suitable balance between these three indicators. Here, we address them by developing a self-healing tire compound using styrene–butadiene rubber (SBR) as the matrix and reclaimed tire waste as the sustainable filler. The addition of ground tire rubber (GTR) to the matrix simultaneously improved the rolling resistance and maintained both wet grip and healing ability. We provide an in-depth analysis of the healing behavior of the material at a scale close to the relevant molecular processes through a systematic dynamic-mechanical and dielectric analysis. We found that SBR and SBR/GTR compounds show a complete recovery of stiffness and relaxation dynamics after being damaged by cyclic deformation, resulting in a heterogeneous repaired rubber network. This new development could well overcome the so-called magic triangle of tires, which is certainly one of the key objectives of the tire industryThe authors acknowledge the Ministry of Science, Innovation and Universities of Spain for a research contract(MAT2015-73392-JIN)and M.Hernández Santana for a Ramón y Cajal contract(RYC-2017-22837). The authors also acknowledge Signus Ecovalor for providing the ground tire rubber

Design of Rubber Composites with Autonomous Self-Healing Capability

The development of self-healing rubbers is currently under investigation as a strategy to promote their reuse and, hence, reduce their waste. However, autonomous, multicycle self-healing rubbers with good mechanical properties have so far proven difficult to achieve. Here, mechanically robust composites based on epoxidized natural rubber (ENR) and thermally reduced graphene oxide (TRGO) were successfully designed and prepared with a high healing efficiency of up to 85% at room temperature without applying external stimuli. The incorporation of TRGO not only improves the mechanical performance in more than 100% in relation to pristine ENR but also promotes the hydrogen bonding interactions with the rubber. This leads to a homogenous dispersion of TRGO within the ENR matrix, which further increases its self-healing capability.The authors acknowledge the Ministry of Science, Innovation and Universities of Spain for a research contract (MAT2015- 73392-JIN) and M. Hernández Santana for a Ramón y Cajal contract (RYC-2017-22837)

Use of Novel Non-Toxic Bismuth Catalyst for the Preparation of Flexible Polyurethane Foam

Foam products are one of the largest markets for polyurethane (PU) and are heavily used in many sectors. However, current PU formulations use highly toxic and environmentally unfriendly production processes. Meanwhile, the increasing environmental concerns and regulations are intensifying the research into green and non-toxic products. In this study, we synthesized flexible polyurethane foam (PUF) using different weight percentages (0.025%, 0.05% and 0.1%) of a non-toxic bismuth catalyst. The bismuth-catalyzed foams presented a well evolved cellular structure with an open cell morphology. The properties of the bismuth-catalyzed flexible PUF, such as the mechanical, morphological, kinetic and thermal behaviors, were optimized and compared with a conventional tin-catalyzed PUF. The bismuth-catalyst revealed a higher isocyanate conversion efficiency than the stannous octoate catalyst. When comparing samples with similar densities, the bismuth-catalyzed foams present better mechanical behavior than the tin-catalyzed sample with similar thermal stability. The high solubility of bismuth triflate in water, together with its high Lewis acidity, have been shown to benefit the production of PU foams