62 research outputs found
Calculation for physical and chemical exergy of flows in systems elaborating mixed-phase flows and a case study in an IRSOFC plant
The paper deals with the calculation of physical and chemical exergy of flows in systems elaborating mixed-phase flows, such as steam methane reforming and coal gasification systems. The flows involved are mixtures of gases, which can be treated as ideal gases, and steam. The mixtures in which the steam can be treated as ideal gas and those in which the steam cannot be treated as ideal gas are considered separately. As a case study, the calculation is used to evaluate the physical and chemical exergy content of the flows of a system composed by a pressurized internal reforming solid oxide fuel cell (IRSOFC) combined with a gas turbine. Finally, a thermoeconomic analysis of the system is made. Copyright © 2004 John Wiley & Sons, Ltd
Inferring connection proximity in networks of electrically coupled cells by subthreshold frequency response analysis
Electrical synapses continuously transfer signals bi-directionally from one cell to another, directly or indirectly via intermediate cells. Electrical synapses are common in many brain structures such as the inferior olive, the subcoeruleus nucleus and the neocortex, between neurons and between glial cells. In the cortex, interneurons have been shown to be electrically coupled and proposed to participate in large, continuous cortical syncytia, as opposed to smaller spatial domains of electrically coupled cells. However, to explore the significance of these findings it is imperative to map the electrical synaptic microcircuits, in analogy with in vitro studies on monosynaptic and disynaptic chemical coupling. Since "walking” from cell to cell over large distances with a glass pipette is challenging, microinjection of (fluorescent) dyes diffusing through gap-junctions remains so far the only method available to decipher such microcircuits even though technical limitations exist. Based on circuit theory, we derive analytical descriptions of the AC electrical coupling in networks of isopotential cells. We then suggest an operative electrophysiological protocol to distinguish between direct electrical connections and connections involving one or more intermediate cells. This method allows inferring the number of intermediate cells, generalizing the conventional coupling coefficient, which provides limited information. We validate our method through computer simulations, theoretical and numerical methods and electrophysiological paired recording
A new generation of bio-composite thermoplastic filaments for a more sustainable design of parts manufactured by FDM
The most recent developments of Fused Deposition Modelling (FDM) techniques are moving the application of Additive Manufacturing (AM) technologies toward new areas of investigation such as the biomedical, aerospace, and marine engineering in addition to the more consolidated industrial and civil fields. Some specific characteristics are required for the components designed for peculiar applications, such as complex geometries, lightweight, and high strength as well as breathability and aesthetic appearance specifically in the biomedical field. All these design specifications could be potentially satisfied by manufacturing with 3D printing techniques. Moreover, the development of purpose-dedicated filaments can be considered a key factor to successfully meet all the requirements. In this paper, fabrication and applications of five new thermoplastic materials with fillers are described and analyzed. They are organic bio-plastic compounds made of polylactic acid (PLA) and organic by-products. The growing interest in these new composite materials reinforced with organic by-products is due to the reduction of production management costs and their low environmental impact. In this study, the production workflow has been set up and described in detail. The main properties of these new thermoplastic materials have been analyzed with a major emphasis on strength, lightweight, and surface finish. The analysis showed that these materials can be particularly suitable for biomedical applications. Therefore, two different biomedical devices were selected and relative prototypes were manufactured with one of the analyzed thermoplastic materials. The feasibility, benefits, and performance of the thermoplastic material considered for these applications were successfully assessed
Design of Active Tyre-Suspension-Seat System Through Multibody Model and Genetic Algorithms
n/
New method for estimating fractal dimension in 3d space and its application to complex surfaces
The concept of “surface modeling” generally describes the process of representing a physical or artificial surface by a
geometric model, namely a mathematical expression. Among the existing techniques applied for the characterization of a surface,
terrain modeling relates to the representation of the natural surface of the Earth. Cartographic terrain or relief models as threedimensional
representations of a part of the Earth's surface convey an immediate and direct impression of a landscape and are much
easier to understand than two-dimensional models. This paper addresses a major problem in complex surface modeling and
evaluation consisting in the characterization of their topography and comparison among different textures, which can be relevant in
different areas of research. A new algorithm is presented that allows calculating the fractal dimension of images of complex surfaces.
The method is used to characterize different surfaces and compare their characteristics. The proposed new mathematical method
computes the fractal dimension of the 3D space with the average space component of Hurst exponent H, while the estimated fractal
dimension is used to evaluate, compare and characterize complex surfaces that are relevant in different areas of research. Various
surfaces with both methods were analyzed and the results were compared. The study confirms that with known coordinates of a
surface, it is possible to describe its complex structure. The estimated fractal dimension is proved to be an ideal tool for measuring the
complexity of the various surfaces considered
New Method for Estimating Fractal Dimension in 3D Space and Its Application to Complex Surfaces
The concept of “surface modeling” generally describes the process of representing a physical or artificial surface by a geometric model, namely a mathematical expression. Among the existing techniques applied for the characterization of a surface, terrain modeling relates to the representation of the natural surface of the Earth. Cartographic terrain or relief models as three-dimensional representations of a part of the Earth's surface convey an immediate and direct impression of a landscape and are much easier to understand than two-dimensional models. This paper addresses a major problem in complex surface modeling and evaluation consisting in the characterization of their topography and comparison among different textures, which can be relevant in different areas of research. A new algorithm is presented that allows calculating the fractal dimension of images of complex surfaces. The method is used to characterize different surfaces and compare their characteristics. The proposed new mathematical method computes the fractal dimension of the 3D space with the average space component of Hurst exponent H, while the estimated fractal dimension is used to evaluate, compare and characterize complex surfaces that are relevant in different areas of research. Various surfaces with both methods were analyzed and the results were compared. The study confirms that with known coordinates of a surface, it is possible to describe its complex structure. The estimated fractal dimension is proved to be an ideal tool for measuring the complexity of the various surfaces considered
Closed Cycle Drying Process to Retrain Industrial Sludge into Construction Products
The article describes a new bio-inspired method for the Advanced Treatment of Industrial Sludge with a Closed Cycle Drying Process. This process represents an innovative way of treating sludge and other shovelable residues deriving from sludge treatment with centrifuges and other industrial processes taking place in large installations, such as refineries, steel mills, chemical plants, glass processing installations, cosmetics manufacturing facilities, pharmaceutical plants. The process is under development within the research project TAFIPACC funded by Horizon 2020. In particular, the process allows retraining Industrial Sludge into construction materials using the new Closed Cycle Drying Process. The study deals with sludge produced by an industrial treatment plant/industrial discharges and civil waste water in the industrial area of Priolo Gargallo (SR) Esso-Erg-Enichem petrochemical plants and by the municipalities of Priolo Gargallo, and Melilli. The plants produce about 30 cubic meters of sludge per day, disposed of 50% in underground dumps and for the other 50% in hazardous and non hazardous waste recovery plants. The difficulty in the treatment is mainly due to the nature of these muds, as pasty and difficult to mix with additives (cement, limestone, H2O, granulometric mix). The presence of bad odours derives from light and heavy hydrocarbons, aromatics, and organic solvents (benzene, toluene, styrene, xylene, etc), causing some problems to operators and inhabitants living in the areas surrounding the plants
Feature-Based Modelling of Laryngoscope Blades for Customized Applications
AbstractLaryngoscopes are used as diagnostic devices for throat inspection or as an aid to intubation. Their blade must be geometrically compatible with patients' anatomy to provide a good view to doctors with minimal discomfort to patients. For this reason, this paper was aimed to investigate the feasibility of producing customized blades.The customizable blade model was developed following a feature-based approach with eight morphological parameters. The thickness of such a blade was determined through numerical simulations of ISO certification tests, where the finite element mesh was obtained by morphing a 'standard' mesh.The following procedure was applied: the model was built from the selected parameters; the blade was tested in silico; finally, the blade was produced by additive manufacturing with an innovative biodegradable material (Hemp Bio-Plastic® -HBP-) claimed to feature superior mechanical properties. The procedure evidenced that the mechanical properties of current biodegradable materials are unsuitable for the application unless the certification norm is revised, as it is expected
Complexity Modeling of Steel-Laser-Hardened Surface Microstructures
Nowadays, laser hardening is a consolidated process in many industrial sectors. One of the most interesting aspects to be considered when treating the surface-hardening process in steel materials by means of laser devices is undoubtedly the evaluation of the heat treatment quality and surface finish. In the present study, an innovative method based on fractal geometry was proposed to evaluate the quality of surface-steel-laser-hardened treatment. A suitable genetic programming study of SEM images (1280 Ă— 950 pixels) was developed in order to predict the effect of the main laser process parameters on the microstructural geometry, assuming the microstructure of laser-hardened steel to be of a structurally complex geometrical nature. Specimens hardened by anthropomorphic laser robots were studied to determine an accurate measure of the process parameters investigated (surface temperature, laser beam velocity, laser beam impact angle). In the range of variation studied for these parameters, the genetic programming model obtained was in line with the complexity index calculated following the fractal theory. In particular, a percentage error less than 1% was calculated. Finally, a preliminary study of the surface roughness was carried out, resulting in its strong correlation with complex surface microstructures. Three-dimensional voxel maps that reproduce the surface roughness were developed by automating a routine in Python virtual environment
closed cycle drying process to retrain industrial sludge into construction products
The article describes a new bio-inspired method for the Advanced Treatment of Industrial Sludge with a Closed Cycle Drying Process. This process represents an innovative way of treating sludge and other shovelable residues deriving from sludge treatment with centrifuges and other industrial processes taking place in large installations, such as refineries, steel mills, chemical plants, glass processing installations, cosmetics manufacturing facilities, pharmaceutical plants. The process is under development within the research project TAFIPACC funded by Horizon 2020. In particular, the process allows retraining Industrial Sludge into construction materials using the new Closed Cycle Drying Process. The study deals with sludge produced by an industrial treatment plant/industrial discharges and civil waste water in the industrial area of Priolo Gargallo (SR) Esso-Erg-Enichem petrochemical plants and by the municipalities of Priolo Gargallo, and Melilli. The plants produce about 30 cubic meters of sludge per day, disposed of 50% in underground dumps and for the other 50% in hazardous and non hazardous waste recovery plants. The difficulty in the treatment is mainly due to the nature of these muds, as pasty and difficult to mix with additives (cement, limestone, H2O, granulometric mix). The presence of bad odours derives from light and heavy hydrocarbons, aromatics, and organic solvents (benzene, toluene, styrene, xylene, etc), causing some problems to operators and inhabitants living in the areas surrounding the plants
- …