26 research outputs found
Effect of Initial Buffer Composition on pH Changes During Far-From-Equilibrium Freezing of Sodium Phosphate Buffer Solutions
Purpose. This study aims to assess the pH changes induced by salt precipitation during far-from-equilibrium freezing of sodium phosphate buffers as a function of buffer composition, under experimental conditions relevant to pharmaceutical applicationsâsample volumes larger than a few microliters, experiencing large degrees of undercooling and supersaturation.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/41483/1/11095_2004_Article_296795.pd
Recommended from our members
Freezing of Aqueous Solutions and Chemical Stability of Amorphous Pharmaceuticals: Water Clusters Hypothesis.
Molecular mobility has been traditionally invoked to explain physical and chemical stability of diverse pharmaceutical systems. Although the molecular mobility concept has been credited with creating a scientific basis for stabilization of amorphous pharmaceuticals and biopharmaceuticals, it has become increasingly clear that this approach represents only a partial description of the underlying fundamental principles. An additional mechanism is proposed herein to address 2 key questions: (1) the existence of unfrozen water (i.e., partial or complete freezing inhibition) in aqueous solutions at subzero temperatures and (2) the role of water in the chemical stability of amorphous pharmaceuticals. These apparently distant phenomena are linked via the concept of water clusters. In particular, freezing inhibition is associated with the confinement of water clusters in a solidified matrix of an amorphous solute, with nanoscaled water clusters being observed in aqueous glasses using wide-angle neutron scattering. The chemical instability is suggested to be directly related to the catalysis of proton transfer by water clusters, considering that proton transfer is the key elementary reaction in many chemical processes, including such common reactions as hydrolysis and deamidation.EPSRC EP/N022769/
Influence of Miscibility of Protein-Sugar Lyophilizates on Their Storage Stability
For sugars to act as successful stabilizers of proteins during lyophilization and subsequent storage, they need to have several characteristics. One of them is that they need to be able to form interactions with the protein and for that miscibility is essential. To evaluate the influence of protein-sugar miscibility on protein storage stability, model protein IgG was lyophilized in the presence of various sugars of different molecular weight. By comparing solid-state nuclear magnetic resonance spectroscopy relaxation times of both protein and sugar on two different timescales, i.e., H-1 T-1 and H-1 T-1 rho, miscibility of the two components was established on a 2-5- and a 20-50-nm length scale, respectively, and related to protein storage stability. Smaller sugars showed better miscibility with IgG, and the tendency of IgG to aggregate during storage was lower for smaller sugars. The largest sugar performed worst and was phase separated on both length scales. Additionally, shorter protein H-1 T-1 relaxation times correlated with higher aggregation rates during storage. The enzyme-linked immunosorbent assay (ELISA) assay showed overlapping effects of aggregation and chemical degradation and did not correspond as well with the miscibility. Because of the small scale at which miscibility was determined (2-5 nm) and the size of the protein domains (similar to 2.5 x 2.5 x 5 nm), the miscibility data give an indirect measure of interaction between protein and sugar. This reduced interaction could be the result of steric hindrance, providing a possible explanation as to why smaller sugars show better miscibility and storage stability with the protein
Evaluation of manometric temperature measurement, a process analytical technology tool for freeze-drying: Part I, product temperature measurement
This study examines the factors that may cause systematic errors in the manometric temperature measurement (MTM) procedure used to evaluate product temperature during primary drying. MTM was conducted during primary drying using different vial loads, and the MTM product temperatures were compared with temperatures directly measured by thermocouples. To clarify the impact of freeze-drying load on MTM product temperatures, simulation of the MTM vapor pressure rise was performed, and the results were compared with the experimental results. The effect of product temperature heterogeneity in MTM product temperature determination was investigated by comparing the MTM product temperatures with directly measured thermocouple product temperatures in systems differing in temperature heterogeneity. Both the simulated and experimental results showed that at least 50 vials (5 mL) were needed to give sufficiently rapid pressure rise during the MTM data collection period (25 seconds) in the freeze dryer, to allow accurate determination of the product temperature. The product temperature is location dependent, with higher temperature for vials on the edge of the array and lower temperature for the vials in the center of the array. The product temperature heterogeneity is also dependent upon the freeze-drying conditions. In product temperature heterogeneous systems, MTM measures a temperature close to the coldest product temperature, even, if only a small fraction of the samples have the coldest product temperature. The MTM method is valid even at very low product temperature (â45°C)
Solid state13C NMR investigation of impact of annealing in lyophilized glasses
The purpose of this study was to investigate the impact of annealing on molecular mobility in lyophilized glasses, composed of a saccharide excipient and a small concentration of aspartame as a model âdrug.â Changes in molecular dynamics during annealing were monitored through carbon (13C) T1 and T1? nuclear magnetic resonance relaxation times of the aspartame and the saccharides. Two different saccharides were studied, sucrose and trehalose. The local mobility of the aspartame guest was found to correlate closely with the overall structural relaxation monitored through calorimetric methods in the aspartame: sucrose formulation. In general terms, annealing leads to longer NMR relaxation times, indicating a slowing of the local dynamics. By contrast, annealing had only a minimal effect on the NMR relaxation times in aspartame: trehalose. Specificity of solid state NMR in detecting molecular mobility in guest and host molecules showed that sucrose provided a homogenous matrix for the guest drug as compared to the trehalose
Heat and mass transfer scale-up issues during freeze drying: II. Control and characterization of the degree of supercooling
This study aims to investigate the effect of the ice nucleation temperature on the primary drying process using an ice fog technique for temperature-controlled nucleation. In order to facilitate scale up of the freeze-drying process, this research seeks to find a correlation of the product resistance and the degree of supercooling with the specific surface area of the product. Freeze-drying experiments were performed using 5% wt/vol solutions of sucrose, dextran, hydroxyethyl starch (HES), and mannitol. Temperature-controlled nucleation was achieved using the ice fog technique where cold nitrogen gas was introduced into the chamber to form an âice fogâ, there-by facilitating nucleation of samples at the temperature of interest. Manometric temperature measurement (MTM) was used during primary drying to evaluate the product resistance as a function of cake thickness. Specific surface areas (SSA) of the freeze-dried cakes were determined. The ice fog technique was refined to successfully control the ice nucleation temperature of solutions within 1°C. A significant increase in product resistance was produced by a decrease in nucleation temperature. The SSA was found to increase with decreasing nucleation temperature, and the product resistance increased with increasing SSA. The ice fog technique can be refined into a viable method for nucleation temperature control. The SSA of the product correlates well with the degree of supercooling and with the resistance of the product to mass transfer (ie, flow of water vapor through the dry layer). Using this correlation and SSA measurements, one could predict scaleup drying differences and accordingly alter the freeze-drying process so as to bring about equivalence of product temperature history during lyophilization
Heat and mass transfer scale-up issues during freeze-drying, III: Control and characterization of dryer differences via operational qualification tests
The objective of this research was to estimate differences in heat and mass transfer between freeze dryers due to inherent design characteristics using data obtained from sublimation tests. This study also aimed to provide guidelines for convenient scale-up of the freeze-drying process. Data obtained from sublimation tests performed on laboratory-scale, pilot, and production freeze dryers were used to evaluate various heat and mass transfer parameters: nonuniformity in shelf surface temperatures, resistance of pipe, refrigeration system, and condenser. Emissivity measurements of relevant surfaces such as the chamber wall and the freeze dryer door were taken to evaluate the impact of atypical radiation heat transfer during scale-up. âHotâ and âcoldâ spots were identified on the shelf surface of different freeze dryers, and the impact of variation in shelf surface temperatures on the primary drying time and the product temperature during primary drying was studied. Calculations performed using emissivity measurements on different freeze dryers suggest that a front vial in the laboratory lyophilizer received 1.8 times more heat than a front vial in a manufacturing freeze dryer operating at a shelf temperature of â25°C and a chamber pressure of 150 mTorr during primary drying. Therefore, front vials in the laboratory are much more atypical than front vials in manufacturing. Steady-state heat and mass transfer equations were used to study a combination of different scaleup issues pertinent during lyophilization cycles commonly used for the freeze-drying of pharmaceuticals