Guest editorial

Includes bibliographical references.Guest editorial introducing issue of IEEE Journal of Quantum Electronics

Modelling the benefits of flood emergency management measures in reducing damages: a case study on Sondrio, Italy

Abstract. The European "Floods Directive" 2007/60/EU has produced an important shift from a traditional approach to flood risk management centred only on hazard analysis and forecast to a newer one which encompasses other aspects relevant to decision-making and which reflect recent research advances in both hydraulic engineering and social studies on disaster risk. This paper accordingly proposes a way of modelling the benefits of flood emergency management interventions calculating the possible damages by taking into account exposure, vulnerability, and expected damage reduction. The results of this model can be used to inform decisions and choices for the implementation of flood emergency management measures. A central role is played by expected damages, which are the direct and indirect consequence of the occurrence of floods in exposed and vulnerable urban systems. How damages should be defined and measured is a key question that this paper tries to address. The Floods Directive suggests that mitigation measures taken to reduce flood impact need to be evaluated also by means of a cost–benefit analysis. The paper presents a methodology for assessing the effectiveness of early warning for flash floods, considering its potential impact in reducing direct physical damage, and it assesses the general benefit in regard to other types of damages and losses compared with the emergency management costs. The methodology is applied to the case study area of the city of Sondrio in the northern Alpine region of Italy. A critical discussion follows the application. Its purpose is to highlight the strengths and weaknesses of available models for quantifying direct physical damage and of the general model proposed, given the current state of the art in damage and loss assessment

Temporal dynamics of semiconductor lasers with optical feedback

Includes bibliographical references (page 5539).We measure the temporal evolution of the intensity of an edge emitting semiconductor laser with delayed optical feedback for time spans ranging from 4.5 to 65 ns with a time resolution from 16to 230 ps, respectively. Spectrally resolved streak camera measurements show that the fast pulsing of the total intensity is a consequence of the time delay and multimode operation of the laser. We experimentally observe that the instabilities at low frequency are generated by the interaction among different modes of the laser

Three-dimensional confinement in the conduction band structure of InP

Includes bibliographical references.Strong quantum confinement in InP is observed to significantly reduce the separation between the direct and indirect conduction band states. The effects of three-dimensional confinement are investigated by tailoring the initial separation between conduction band states using quantum dots (QDs) of different sizes and hydrostatic pressure. Analyses of the QD emission spectra show that the X1c states are lowest in energy at pressures of ~6 GPa, much lower than in the bulk. The transition to the X1c states can be explained by either a sequence of Γ-L and L-X crossings, or by the crossover between strongly coupled Γ and X states.The work at CSU was supported by the National Science Foundation, and that at NREL by the U.S. Department of Energy, Office of Basic Energy Sciences, Chemical Sciences Division

A method for the experimental measurement of bulk and shear loss angles in amorphous thin films

Brownian thermal noise is a limiting factor for the sensitivity of many high precision metrology applications, among other gravitational-wave detectors. The origin of Brownian noise can be traced down to internal friction in the amorphous materials that are used for the high reflection coatings. To properly characterize the internal friction in an amorphous material, one needs to consider separately the bulk and shear losses. In most of previous works the two loss angles were considered equal, although without any first principle motivation. In this work we present a method that can be used to extract the material bulk and shear loss angles, based on current state-of-the-art coating ring-down measurement systems. We also show that for titania-doped tantala, a material commonly used in gravitational-wave detector coatings, the experimental data strongly favor a model with two different and distinct loss angles, over the simpler case of one single loss angle

Investigation of laser annealing mechanisms in thin film coatings by photothermal microscopy

We study the evolution of the absorptance of amorphous metal oxide thin films when exposed to intense CW laser radiation measured using a photothermal microscope. The evolution of the absorptance is characterized by a nonexponential decay. Different models that incorporate linear and nonlinear absorption, free carrier absorption, and defect diffusion are used to fit the results, with constraints imposed on the fit parameters to scale with power and intensity. The model that best fits is that two types of interband defects are passivated independently, one by a one-photon process and the other one by a two-photon process.Fil: Zaldivar Escola, Facundo. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Física; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas; ArgentinaFil: Mingolo, Nélida. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Física; ArgentinaFil: Martínez, Oscar E.. Universidad de Buenos Aires. Facultad de Ingeniería. Departamento de Física; ArgentinaFil: Rocca, Jorge J.. State University of Colorado - Fort Collins; Estados UnidosFil: Menoni, Carmen S.. State University of Colorado - Fort Collins; Estados Unido

Spatio-temporal dynamics in vertical cavity surface emitting lasers excited by fast electrical pulses

Includes bibliographical references (pages 320-321).We have measured the time average spatial intensity distribution and the spatio-temporal evolution of the spectrally resolved radiation emitted from broad-area vertical cavity surface emitting lasers (VCSEL) when pumped by a fast current pulse. We show that an intrinsic symmetry break exists due to geometrical asymmetry of the device structure and that the frequency separation between different modes allows the evaluation of the asymmetry factor. The space-time behavior shows the appearance of higher-order modes coexisting or alternating in time. The dynamical behavior shows a chirping infrequency

Ablation of Submicrometer Holes Using an Extreme-Ultraviolet Laser

Simulations and experiments are used to study extreme-ultraviolet (EUV) laser drilling of submicrometer holes. The ablation process is studied with a 2D Eulerian hydrodynamic code that includes bound-free absorption processes relevant to the interaction of EUV lasers with a solid material. Good agreement is observed between the simulated and measured ablated depths for on-target irradiances of up to 1×1010  W cm−2. An increase in the irradiance to 1×1012  W cm−2 is predicted to ablate material to a depth of 3.8  μm from a single pulse with a hole diameter 3 to 4 times larger than the focal spot size. The model allows for the simulation of the interaction of a laser pulse with the crater created by a previous shot. Multiple-pulse lower-fluence irradiation configurations under optimized focusing conditions, i.e., approaching the diffraction limit, are shown to be advantageous for applications requiring mesoscale [(100  nm)–(1  μm)] features and a high level of control over the ablation profile