Current-Voltage Characterization of Multi-Port Graphene Based Geometric Diodes for High-Frequency Electromagnetic Harvesting

In this contribution, geometric diodes based on graphene patterned with spatial asymmetry have been studied, starting from tight-binding numerical approximation in a self-consistent framework, to verify their potential for electromagnetic (e. m.) harvesting. We report a detailed analysis of coherent charge transport and provide some figures of merit with respect to e. m. rectification, such as, for instance, the asymmetry of the dark current-voltage characteristics. The most important achievement of this work is given by the accurate analysis of the main key physical/geometric parameters that affect the nonlinear response of the diodes, for different configurations and geometries. Owing to the Scattering Matrix approach, introduced elsewhere for coherent transport calculation, it was possible to cascade asymmetric discontinuities and simulate large structures (more than 100K atoms) in a modular fashion. In this way, simulation at the atomistic level can be brought up to the device level to provide guidelines for design and fabrication, in view of practical applications related to clean-energy harvesting/rectification up to infrared and solar-light frequencies

Physical parameters kinetics during the drying process of quarters and halves cut tomatoes

Received: January 27th, 2023 ; Accepted: May 8th, 2023 ; Published: May 19th, 2023 ; Correspondence: [email protected] drying is a time-consuming industrial process. Moreover, the prolonged use of high temperatures decreases the quality of tomatoes and increases the environmental footprint of the process. In most cases, drying is performed on halved tomatoes. Alternatively, the use of quarter tomatoes could guarantee a drying times reduction without compromising the final product quality. This work aimed at modelling changes in physical characteristics of half and quarter tomatoes. The drying tests were conducted at 50 and 60 °C. The kinetics of weight loss, colour change, and volume reduction were determined. Colour change was monitored through image analysis, while volume reduction using RGB-D reconstructions. Based on the results, an increase in the drying temperature and the use of quartered tomatoes allow a significant reduction in drying times. The loss of water kinetic allowed the determination of critical moisture. Between initial and critical moisture, loss of water occurred at constant rate (zero-order kinetic), while after that the rate decreased exponentially (first-order kinetic). The colour kinetics showed an initial constant rate followed by a linear increase for brown pixels. The variation of red pixels did not have a clear trend. Increasing the temperature there was no significant reduction in colour quality while quarter tomatoes showed a greater loss of redness than halved tomatoes. Furthermore, the temperature increase does not affect the volume reduction of the tomatoes. Increasing the temperature and the use of quartered tomatoes are simple solutions to reduce drying times. However, quartered tomatoes are less visually appreciable than halved tomatoes

Extending ballistic graphene FET lumped element models to diffusive devices

In this work, a modified, lumped element graphene field effect device model is presented. The model is based on the "Top-of-the-barrier" approach which is usually valid only for ballistic graphene nanotransistors. Proper modifications are introduced to extend the model's validity so that it accurately describes both ballistic and diffusive graphene devices. The model is compared to data already presented in the literature. It is shown that a good agreement is obtained for both nano-sized and large area graphene based channels. Accurate prediction of drain current and transconductance for both cases is obtained

Dirac-Based Quantum Admittance of 2D Nanomaterials at Radio Frequencies

Starting from a rigorous finite mass, Dirac equation-based model, we investigate the R.F. quantum admittance of a monolayer 2D material under the action of an electromagnetic (e.m.) wave with axially directed vector potential. With some reasonable approximations, the analysis yields a relatively simple RLC-equivalent circuit with frequency-independent elements depending on the bias, temperature, effective mass, Fermi velocity and effective e.m. index of the material, losses and other relevant parameters

Nano-antenna array for high efficiency sunlight harvesting

none5noSolar rectennas are promising devices for energy harvesting. Capability of rectennas to convert incident light into useful energy depends on the antenna efficiency, that is the ratio between the power transferred to the load vs the incoming power. In this work, we first emphasize that for the efficiency to be calculated accurately, antennas need to be treated as receiving devices, not as transmitting ones. Then, we propose an arrangement of antennas that differs from those published so far in three respects: (1) the proposed arrangement is formed by an array of nano-antennas with sub-wavelength inter-element spacing, (2) it comprises a reflecting mirror, and (3) it allows for dual polarization operation. Through numerical simulations, we show that the small lattice pitch we use is responsible for frequency flattening of the lattice impedance over the whole solar spectrum, eventually allowing for excellent matching with the antennas’ loads. Also, the small pitch allows for a smooth dependence of the receiving efficiency on the angle of incidence of sunlight. Finally, we show numerically that the reflecting mirror also allows for an almost complete cancellation of light scattered by the receiving antennas. The final result is a polarization insensitive receiving theoretical efficiency larger than 70% over the whole 300-3000 nm spectral range, with a less than 10% energy wasting due to back-scattering of sunlight.openMidrio M.; Pierantoni L.; Boscolo S.; Truccolo D.; Mencarelli D.Midrio, M.; Pierantoni, L.; Boscolo, S.; Truccolo, D.; Mencarelli, D

Dynamic mechanical thermal analysis of hypromellose 2910 free films

It is common practice to coat oral solid dosage forms with polymeric materials for controlled release purposes or for practical and aesthetic reasons. Good knowledge of thermo-mechanical film properties or their variation as a function of polymer grade, type and amount of additives or preparation method is of prime importance in developing solid dosage forms. This work focused on the dynamic mechanical thermal characteristics of free films of hypromellose 2910 (also known as HPMC), prepared using three grades of this polymer from two different manufacturers, in order to assess whether polymer chain length or origin affects the mechanical or thermo-mechanical properties of the final films. Hypromellose free films were obtained by casting their aqueous solutions prepared at a specific concentrations in order to obtain the same viscosity for each. The films were stored at room temperature until dried and then examined using a dynamic mechanical analyser. The results of the frequency scans showed no significant differences in the mechanical moduli E' and E" of the different samples when analysed at room temperature; however, the grade of the polymer affected material transitions during the heating process. Glass transition temperature, apparent activation energy and fragility parameters depended on polymer chain length, while the material brand showed little impact on film performance

Free and glycosylated green leaf volatiles, lipoxygenase and alcohol dehydrogenase in defoliated Nebbiolo grapes during postharvest dehydration

none7noBackground and Aims: Nebbiolo grapes are used to produce Sfursat wine, following partial dehydration. This research aimed to clarify the influence of fruit exposure to light and postharvest water loss on the concentration of green leaf volatiles (GLVs) and lipoxygenase (LOX) and alcohol dehydrogenase (ADH) activity of grapes. Methods and Results: Nebbiolo grapes from Control vines (no defoliation) (ND) and from vines defoliated at fruitset (DFS) or defoliated post-veraison (DPV) were harvested at about 23°Brix and dehydrated at 10 and 20°C, 60% RH and air flow of 1.5 m/s. Berries were sampled at 10 and 20% mass loss (ML). Significant differences in crop yield, bunch mass and berry mass were observed. As expected, the higher the dehydration temperature, the faster the dehydration process: 20% ML at 20°C occurred between 18 and 25 days, the shortest time corresponding to ND and the longest to DFS; at 10°C, the dehydration lasted between 27 and 32 days. At 10°C, the ADH activity was almost double that at 20°C, and in DFS was much higher than in other samples. At harvest, LOX did not show any difference among the samples, while at 10°C and 10% ML, the enzyme activity increased significantly and then declined at 20% ML, especially in defoliated samples. At harvest, the total free GLVs associated with the metabolism of lipid oxidation were 9434, 7212 and 11 656 μg/kg dry weight (DW) in ND, DFS and DPV samples, respectively; the total bound GLVs lipid-derived were 7599, 18 486 and 15 409 μg/kg DW in ND, DFS and DPV samples, respectively. During dehydration at 10°C, the ML induced ADH + LOX activity, especially in defoliated samples, but the bound GLVs, produced by defoliation, greatly decreased. Conclusions: Defoliation affected the response of Nebbiolo grapes to dehydration temperature: postharvest cold stress (10°C) and ML induced glycosylation of GLVs, alcohol formation (via ADH) and membrane oxidation (via LOX); a further stress effect was observed with leaf removal, regardless of the time of application. Significance of the Study: The timing of defoliation and postharvest dehydration temperature are significant factors to mitigate the postharvest stress response of Nebbiolo grapes.openPiombino P.; Genovese A.; Rustioni L.; Moio L.; Failla O.; Bellincontro A.; Mencarelli F.Piombino, P.; Genovese, A.; Rustioni, L.; Moio, L.; Failla, O.; Bellincontro, A.; Mencarelli, F

Rubbing effects on the structural and optical properties of poly(3­hexylthiophene) films

International audienc

Neural correlates of N-back task performance and proposal for corresponding neuromodulation targets in psychiatric and neurodevelopmental disorders

Aim: Working memory (WM) deficit represents the most common cognitive impairment in psychiatric and neurodevelopmental disorders, making the identification of its neural substrates a crucial step towards the conceptualization of restorative interventions. We present a meta-analysis focusing on neural activations associated with the most commonly used task to measure WM, the N-back task, in patients with schizophrenia, depressive disorder, bipolar disorder, and attention-deficit/hyperactivity disorder. Showing qualitative similarities and differences in WM processing between patients and healthy controls, we propose possible targets for cognitive enhancement approaches. Methods: Selected studies, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines, were analyzed through the activation likelihood estimate statistical framework, with subsequent generation of disorder-specific N-back activation maps. Results: Despite similar WM deficits shared across all disorders, results highlighted different brain activation patterns for each disorder compared with healthy controls. In general, results showed brain activity in frontal, parietal, subcortical, and cerebellar regions; however, reduced engagement of specific nodes of the fronto-parietal network emerged in patients compared with healthy controls. In particular, neither bipolar nor depressive disorders showed detectable activations in the dorsolateral prefrontal cortices, while their parietal activation patterns were lateralized to the left and right hemispheres, respectively. On the other hand, patients with attention-deficit/hyperactivity disorder showed a lack of activation in the left parietal lobe, whereas patients with schizophrenia showed lower activity over the left prefrontal cortex. Conclusion: These results, together with biophysical modeling, were then used to discuss the design of future disorder-specific cognitive enhancement interventions based on noninvasive brain stimulation

Local and Distributed fMRI Changes Induced by 40 Hz Gamma tACS of the Bilateral Dorsolateral Prefrontal Cortex: A Pilot Study

Over the past few years, the possibility of modulating fast brain oscillatory activity in the gamma (γ) band through transcranial alternating current stimulation (tACS) has been discussed in the context of both cognitive enhancement and therapeutic scenarios. However, the effects of tACS targeting regions outside the motor cortex, as well as its spatial specificity, are still unclear. Here, we present a concurrent tACS-fMRI block design study to characterize the impact of 40 Hz tACS applied over the left and right dorsolateral prefrontal cortex (DLPFC) in healthy subjects. Results suggest an increase in blood oxygenation level-dependent (BOLD) activity in the targeted bilateral DLPFCs, as well as in surrounding brain areas affected by stimulation according to biophysical modeling, i.e., the premotor cortex and anterior cingulate cortex (ACC). However, off-target effects were also observed, primarily involving the visual cortices, with further effects on the supplementary motor areas (SMA), left subgenual cingulate, and right superior temporal gyrus. The specificity of 40 Hz tACS over bilateral DLPFC and the possibility for network-level effects should be considered in future studies, especially in the context of recently promoted gamma-induction therapeutic protocols for neurodegenerative disorders. © 2022 Lucia Mencarelli et al