The Radio Afterglow and Host Galaxy of the Dark GRB 020819

Of the fourteen gamma-ray bursts (GRBs) localized to better than 2' radius with the SXC on HETE-2, only two lack optical afterglow detections, and the high recovery rate among this sample has been used to argue that the fraction of truly dark bursts is ~10%. While a large fraction of earlier dark bursts can be explained by the failure of ground-based searches to reach appropriate limiting magnitudes, suppression of the optical light of these SXC dark bursts seems likely. Here we report the discovery and observation of the radio afterglow of GRB 020819, an SXC dark burst, which enables us to identify the likely host galaxy (probability of 99.2%) and hence the redshift (z=0.41) of the GRB. The radio light curve is qualitatively similar to that of several other radio afterglows, and may include an early-time contribution from the emission of the reverse shock. The proposed host is a bright R = 19.5 mag barred spiral galaxy, with a faint R ~ 24.0 mag "blob'' of emission, 3" from the galaxy core (16 kpc in projection), that is coincident with the radio afterglow. Optical photometry of the galaxy and blob, beginning 3 hours after the burst and extending over more than 100 days, establishes strong upper limits to the optical brightness of any afterglow or associated supernova. Combining the afterglow radio fluxes and our earliest R-band limit, we find that the most likely afterglow model invokes a spherical expansion into a constant-density (rather than stellar wind-like) external environment; within the context of this model, a modest local extinction of A_V ~ 1 mag is sufficient to suppress the optical flux below our limits.Comment: 7 pages, 2 figures. ApJ, in press. For more info on dark bursts, see http://www.astro.ku.dk/~pallja/dark.htm

Lower Neutrino Mass Bound from SN1987A Data and Quantum Geometry

A lower bound on the light neutrino mass $m_\nu$ is derived in the framework of a geometrical interpretation of quantum mechanics. Using this model and the time of flight delay data for neutrinos coming from SN1987A, we find that the neutrino masses are bounded from below by $m_\nu\gtrsim 10^{-4}-10^{-3}$eV, in agreement with the upper bound $m_\nu\lesssim$ $({\cal O}(0.1) - {\cal O} (1))$ eV currently available. When the model is applied to photons with effective mass, we obtain a lower limit on the electron density in intergalactic space that is compatible with recent baryon density measurements.Comment: 22 pages, 3 figure

Community-based adaptation research in the Canadian Arctic

Community-based adaptation (CBA) has emerged over the last decade as an approach to empowering communities to plan for and cope with the impacts of climate change. While such approaches have been widely advocated, few have critically examined the tensions and challenges that CBA brings. Responding to this gap, this article critically examines the use of CBA approaches with Inuit communities in Canada. We suggest that CBA holds significant promise to make adaptation research more democratic and responsive to local needs, providing a basis for developing locally appropriate adaptations based on local/indigenous and Western knowledge. Yet, we argue that CBA is not a panacea, and its common portrayal as such obscures its limitations, nuances, and challenges. Indeed, if uncritically adopted, CBA can potentially lead to maladaptation, may be inappropriate in some instances, can legitimize outside intervention and control, and may further marginalize communities. We identify responsibilities for researchers engaging in CBA work to manage these challenges, emphasizing the centrality of how knowledge is generated, the need for project flexibility and openness to change, and the importance of ensuring partnerships between researchers and communities are transparent. Researchers also need to be realistic about what CBA can achieve, and should not assume that research has a positive role to play in community adaptation just because it utilizes participatory approaches

The early optical afterglow of GRB 030418 and progenitor mass loss

The ROTSE-IIIa telescope and the SSO 40 inch (1.0 m) telescope, both located at Siding Spring Observatory, imaged the early-time afterglow of GRB 030418. In this report, we present observations of the early afterglow, first detected by the ROTSE-IIIa telescope 211 s after the start of the burst and only 76 s after the end of the gamma-ray activity. We detect optical emission that rises for ∼600 s, slowly varies around R = 17.3 mag for ∼1400 s, and then fades as a power law of index α = -1.36. Additionally, the ROTSE-IIIb telescope, located at McDonald Observatory, imaged the early-time afterglow of GRB 030723. The behavior of this light curve was qualitatively similar to that of GRB 030418, but 2 mag dimmer. These two afterglows are dissimilar to other afterglows such as GRB 990123 and GRB 021211. We investigate whether or not the early afterglow can be attributed to a synchrotron break in a cooling synchrotron spectrum as it passes through the optical band, but we find that this model is unable to accurately describe the early light curve. We present a simple model for gamma-ray burst emission emerging from a wind medium surrounding a massive progenitor star. This model provides an effective description of the data and suggests that the rise of the afterglow can be ascribed to extinction in the local circumburst environment. In this interpretation, these events provide further evidence of the connection between gamma-ray bursts and the collapse of massive stars

Automatic Assignment of EC Numbers

A wide range of research areas in molecular biology and medical biochemistry require a reliable enzyme classification system, e.g., drug design, metabolic network reconstruction and system biology. When research scientists in the above mentioned areas wish to unambiguously refer to an enzyme and its function, the EC number introduced by the Nomenclature Committee of the International Union of Biochemistry and Molecular Biology (IUBMB) is used. However, each and every one of these applications is critically dependent upon the consistency and reliability of the underlying data for success. We have developed tools for the validation of the EC number classification scheme. In this paper, we present validated data of 3788 enzymatic reactions including 229 sub-subclasses of the EC classification system. Over 80% agreement was found between our assignment and the EC classification. For 61 (i.e., only 2.5%) reactions we found that their assignment was inconsistent with the rules of the nomenclature committee; they have to be transferred to other sub-subclasses. We demonstrate that our validation results can be used to initiate corrections and improvements to the EC number classification scheme

Intelligent decision support for maintenance: an overview and future trends

The changing nature of manufacturing, in recent years, is evident in industry’s willingness to adopt network-connected intelligent machines in their factory development plans. A number of joint corporate/government initiatives also describe and encourage the adoption of Artificial Intelligence (AI) in the operation and management of production lines. Machine learning will have a significant role to play in the delivery of automated and intelligently supported maintenance decision-making systems. While e-maintenance practice provides aframework for internet-connected operation of maintenance practice the advent of IoT has changed the scale of internetworking and new architectures and tools are needed. While advances in sensors and sensor fusion techniques have been significant in recent years, the possibilities brought by IoT create new challenges in the scale of data and its analysis. The development of audit trail style practice for the collection of data and the provision of acomprehensive framework for its processing, analysis and use should be avaluable contribution in addressing the new data analytics challenges for maintenance created by internet connected devices. This paper proposes that further research should be conducted into audit trail collection of maintenance data, allowing future systems to enable ‘Human in the loop’ interactions

Facile synthesis and proposed mechanism of α,ω‐oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane) by an SN2(i) nitrato displacement method in basic media

The synthesis of a novel heterocyclic–telechelic polymer, α,ω-oxetanyl-telechelic poly(3-nitratomethyl-3-methyl oxetane), is described. Infrared spectroscopy (IR), gel permeation chromatography (GPC), and nuclear magnetic resonance (NMR) spectroscopy have been used to confirm the successful synthesis, demonstrating the presence of the telechelic-oxetanyl moieties. Synthesis of the terminal functionalities has been achieved via displacement of nitrato groups, in a manner similar to that employed with other leaving groups such as azido, bromo, and nitro, initiated by nucleophiles. In the present case, displacement occurs on the ends of a nitrato-functionalized polymer driven by the formation of sodium nitrate, which is supported by the polar aprotic solvent N,N-dimethyl formamide. The formation of an alkoxide at the polymer chain ends is favored and allows internal back-biting to the nearest carbon bearing the nitrato group, intrinsically in an SN2(i) reaction, leading to α,ω-oxetanyl functionalization. The telechelic-oxetanyl moieties have the potential to be cross-linked by chemical (e.g., acidic) or radiative (e.g., ultraviolet) curing methods without the use of high temperatures, usually below 100°C. This type of material was designed for future use as a contraband simulant, whereby it would form the predominant constituent of elastomeric composites comprising rubbery polymer with small quantities of solids, typically crystals of contraband substances, such as explosives or narcotics. This method also provides an alternative approach to ring closure and synthesis of heterocycles

UKPMC: a full text article resource for the life sciences

UK PubMed Central (UKPMC) is a full-text article database that extends the functionality of the original PubMed Central (PMC) repository. The UKPMC project was launched as the first ‘mirror’ site to PMC, which in analogy to the International Nucleotide Sequence Database Collaboration, aims to provide international preservation of the open and free-access biomedical literature. UKPMC (http://ukpmc.ac.uk) has undergone considerable development since its inception in 2007 and now includes both a UKPMC and PubMed search, as well as access to other records such as Agricola, Patents and recent biomedical theses. UKPMC also differs from PubMed/PMC in that the full text and abstract information can be searched in an integrated manner from one input box. Furthermore, UKPMC contains ‘Cited By’ information as an alternative way to navigate the literature and has incorporated text-mining approaches to semantically enrich content and integrate it with related database resources. Finally, UKPMC also offers added-value services (UKPMC+) that enable grantees to deposit manuscripts, link papers to grants, publish online portfolios and view citation information on their papers. Here we describe UKPMC and clarify the relationship between PMC and UKPMC, providing historical context and future directions, 10 years on from when PMC was first launched