31 research outputs found
Morphological variations of explosive residue particles and implications for understanding detonation mechanisms
The possibility of recovering undetonated explosive residues following detonation events is well-known; however, the morphology and chemical identity of these condensed phase postblast particles remains undetermined. An understanding of the postblast explosive particle morphology would provide vital information during forensic examinations, allowing rapid initial indication of the explosive material to be microscopically determined prior to any chemical analyses and thereby saving time and resources at the crucial stage of an investigation. In this study, condensed phase particles collected from around the detonations of aluminized ammonium nitrate and RDX-based explosive charges were collected in a novel manner utilizing SEM stubs. By incorporating the use of a focused ion beam during analysis, for the first time it is possible to determine that such particles have characteristic shapes, sizes, and internal structures depending on the explosive and the distance from the detonation at which the particles are recovered. Spheroidal particles (10–210 μm) with microsurface features recovered following inorganic charge detonations were dissimilar to the irregularly shaped particles (5–100 μm) recovered following organic charge firings. Confirmatory analysis to conclude that the particles were indeed explosive included HPLC-MS, Raman spectroscopy, and mega-electron volt–secondary ionization mass spectrometry. These results may impact not only forensic investigations but also the theoretical constructs that govern detonation theory by indicating the potential mechanisms by which these particles survive and how they vary between the different explosive types.EPSRC Grant EP/G037264/
Tissue equivalent curved organic x‐ray detectors utilizing high atomic number polythiophene analogues
Organic semiconductors are a promising material candidate for X-ray detection. However, the low atomic number (Z) of organic semiconductors leads to poor X-ray absorption thus restricting their performance. Herein, the authors propose a new strategy for achieving high-sensitivity performance for X-ray detectors based on organic semiconductors modified with high –Z heteroatoms. X-ray detectors are fabricated with p-type organic semiconductors containing selenium heteroatoms (poly(3-hexyl)selenophene (P3HSe)) in blends with an n-type fullerene derivative ([6,6]-Phenyl C71 butyric acid methyl ester (PC70BM). When characterized under 70, 100, 150, and 220 kVp X-ray radiation, these heteroatom-containing detectors displayed a superior performance in terms of sensitivity up to 600 ± 11 nC Gy−1 cm−2 with respect to the bismuth oxide (Bi2O3) nanoparticle (NP) sensitized organic detectors. Despite the lower Z of selenium compared to the NPs typically used, the authors identify a more efficient generation of electron-hole pairs, better charge transfer, and charge transport characteristics in heteroatom-incorporated detectors that result in this breakthrough detector performance. The authors also demonstrate flexible X-ray detectors that can be curved to a radius as low as 2 mm with low deviation in X-ray response under 100 repeated bending cycles while maintaining an industry-standard ultra-low dark current of 0.03 ± 0.01 pA mm−2
A multi-purpose rehabilitation frame:a novel apparatus for balance training during standing of neurologically impaired individuals
Red mud characterization using atomic and nuclear analytical techniques
Red mud is a toxic waste left as a byproduct in aluminum production Bayer process. Since it contains significant concentrations of other chemical elements interesting for industry, including Rare Earths Elements (REEs), it is also potential secondary ore source. Recent events in some countries have shown that red mud presents a serious environmental hazard if not properly stored. The subject of our study is evaluation of the red mud elemental composition, especially yttrium, scandium, gallium and REEs, from an ex-aluminum plant in Obrovac, Croatia, left from the processing of bauxite mined during late 70's and early 80's at the eastern Adriatic coast and stored in open concrete basins for more than 30 years since then. © 2012 IEEE
Analysis of carbon soil content by using tagged neutron activation
Here we describe a prototype for non-destructive, in-situ, accurate and cost-effectively measurement procedure of carbon in soil based on neutron activation analysis using 14 MeV tagged neutron beam. This technology can be used for carbon baseline assessment on regional scale and for monitoring of its surface and depth storage due to the changes in agricultural practices undertaken in order to mitigate global climate change. © 2012 SPIE
Analysis of carbon soil content by using tagged neutron activation
Here we describe a prototype for non-destructive, in-situ, accurate and cost-effectively measurement procedure of carbon in soil based on neutron activation analysis using 14 MeV tagged neutron beam. This technology can be used for carbon baseline assessment on regional scale and for monitoring of its surface and depth storage due to the changes in agricultural practices undertaken in order to mitigate global climate change. © 2012 SPIE
Red mud characterization using nuclear analytical techniques
Red mud is a toxic waste left as a byproduct in aluminum production Bayer process. Since it contains significant concentrations of other chemical elements interesting for industry, including REE, it is also potential secondary ore source. Recent events in some countries have shown that red mud presents a serious environmental hazard if not properly stored. The subject of our study is the red mud from an ex-aluminum plant in Obrovac, Croatia, left from processing of bauxite mined during late 70's and early 80's at the eastern Adriatic coast and since than stored in open concrete basins for more than 30 years. We have used energy dispersive x-ray fluorescence analysis (both tube and radioactive source excitation), fast neutron activation analysis and passive gamma spectrometry to identify a number of elements present in the red mud, their concentration levels and radioactivity in the red mud. The high concentrations of Al, Si, Ca, Ti and Fe have been measured. Chemical elements Sc, Cr, Mn, Co, Ni, Cu, Zn, Ga, As, Se, Br, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Pb, Th and U were found in lower concentrations. No significant levels of radioactivity have been measured. © 2011 IEEE