Cogging torque comparison of Interior Permanent Magnet Synchronous Generators with different stator windings

This paper presents the comparison between the cogging torques produced by four IPMSGs (Interior Permanent Magnet Synchronous Generators) with different stator winding configurations. More in detail, an IPMSG model, which is derived from a commercial geometry, is analyzed through means of a FEM (Finite Element Method) approach. Then, three more structures are determined and analyzed by adequately changing the number of stator slots of the basic IPMSG stator structure and by maintaining the same rotor configuration. From the obtained simulation results, the cogging torque components for each structure are determined and compared. From this comparison, it can be stated that the use of dissymmetric windings does not affect significantly the generated cogging torque

Development of the State Optimism Measure

Background Optimism, or positive expectations about the future, is associated with better health. It is commonly assessed as a trait, but it may change over time and circumstance. Accordingly, we developed a measure of state optimism. Methods An initial 29-item pool was generated based on literature reviews and expert consultations. It was administered to three samples: sample 1 was a general healthy population (n = 136), sample 2 was people with cardiac disease (n = 96), and sample 3 was persons recovering from problematic substance use (n = 265). Exploratory factor analysis and item-level descriptive statistics were used to select items to form a unidimensional State Optimism Measure (SOM). Confirmatory factor analysis (CFA) was performed to test fit. Results The selected seven SOM items demonstrated acceptable to high factor loadings on a single dominant factor (loadings: 0.64–0.93). There was high internal reliability across samples (Cronbach\u27s alphas: 0.92–0.96), and strong convergent validity correlations in hypothesized directions. The SOM\u27s correlations with other optimism measures indicate preliminary construct validity. CFA statistics indicated acceptable fit of the SOM model. Conclusions We developed a psychometrically-sound measure of state optimism that can be used in various settings. Predictive and criterion validity will be tested in future studies

Is prolonged infusion of piperacillin/tazobactam and meropenem in critically ill patients associated with improved pharmacokinetic/pharmacodynamic and patient outcomes? An observation from the Defining Antibiotic Levels in Intensive care unit patients (DALI) cohort

Objectives:We utilized the database of the Defining Antibiotic Levels in Intensive care unit patients (DALI) study to statistically compare the pharmacokinetic/pharmacodynamic and clinical outcomes between prolonged-infusion and intermittent-bolus dosing of piperacillin/tazobactam and meropenem in critically ill patients using inclusion criteria similar to those used in previous prospective studies.Methods: This was a post hoc analysis of a prospective, multicentre pharmacokinetic point-prevalence study (DALI), which recruited a large cohort of critically ill patients from 68 ICUs across 10 countries.Results: Of the 211 patients receiving piperacillin/tazobactam and meropenem in the DALI study, 182 met inclusion criteria. Overall, 89.0% (162/182) of patients achieved the most conservative target of 50% fT(> MIC) (time over which unbound or free drug concentration remains above the MIC). Decreasing creatinine clearance and the use of prolonged infusion significantly increased the PTA for most pharmacokinetic/pharmacodynamic targets. In the subgroup of patients who had respiratory infection, patients receiving beta-lactams via prolonged infusion demonstrated significantly better 30 day survival when compared with intermittent-bolus patients [86.2% (25/29) versus 56.7% (17/30); P=0.012]. Additionally, in patients with a SOFA score of >= 9, administration by prolonged infusion compared with intermittent-bolus dosing demonstrated significantly better clinical cure [73.3% (11/15) versus 35.0% (7/20); P=0.035] and survival rates [73.3% (11/15) versus 25.0% (5/20); P=0.025].Conclusions: Analysis of this large dataset has provided additional data on the niche benefits of administration of piperacillin/tazobactam and meropenem by prolonged infusion in critically ill patients, particularly for patients with respiratory infections

Nurses' perceptions of aids and obstacles to the provision of optimal end of life care in ICU

Contains fulltext : 172380.pdf (publisher's version ) (Open Access

A general and accurate measurement procedure for the detection of power losses variations in permanent magnet synchronous motor drives

The research of innovative solutions to improve the efficiency of electric drives is of considerable interest to challenges related to energy savings and sustainable development. In order to successfully validate the adoption of new and innovative software or hardware solutions in the field of electric drives, accurate measurement procedures for either efficiency or power losses are needed. Moreover, high accuracy and expensive measurement equipment are required to satisfy international standard prescriptions. In this scenario, this paper describes an accurate measurement procedure, which is independent of the accuracy of the adopted instrumentation, for the power losses variations involved in electrical drives, namely DDP, useful to detect the efficiency enhancement (or power losses reduction) due to the real-time modification of the related control algorithm. The goal is to define a valuable measurement procedure capable of comparing the impact of different control algorithms on electric drive performance. This procedure is carried out by experimentally verifying the action of different control algorithms by the use of a Field Oriented Control (FOC) with different values of the direct-axis current component (i.e., Id = 0 A and Id = =-1 A) applied for fixed working conditions in terms of speed and load torque. Two different measurement systems of power losses, each one characterized by different accuracy and cost, are taken into account for the validation of the proposed method. An investigation is, then, carried out, based on the comparison between the measurements acquired by both instrumentations, for different working conditions in terms of load and speed, highlighting that the uncertainty generated by systematic errors does not affect the DDP measurements. The results reported in this work demonstrate how the DDP parameter can be used as a valuable index for the characterization of the power drive system, which can also be evaluated even with low-accuracy instrumentation