6,572 research outputs found
Advanced expander test bed program
The Advanced Expander Test Bed (AETB) is a key element in NASA's Chemical Transfer Propulsion Program for development and demonstration of expander cycle oxygen/hydrogen engine technology component technology for the next space engine. The AETB will be used to validate the high-pressure expander cycle concept, investigate system interactions, and conduct investigations of advanced missions focused components and new health monitoring techniques. The split-expander cycle AETB will operate at combustion chamber pressures up to 1200 psia with propellant flow rates equivalent to 20,000 lbf vacuum thrust
Global MHD Simulations of Neptune's Magnetosphere
A global magnetohydrodynamic (MHD) simulation has been performed in order to investigate the outer boundaries of Neptune's magnetosphere at the time of Voyager 2's flyby in 1989 and to better understand the dynamics of magnetospheres formed by highly inclined planetary dipoles. Using the MHD code Gorgon, we have implemented a precessing dipole to mimic Neptune's tilted magnetic field and rotation axes. By using the solar wind parameters measured by Voyager 2, the simulation is verified by finding good agreement with Voyager 2 magnetometer observations. Overall, there is a large-scale reconfiguration of magnetic topology and plasma distribution. During the āpole-onā magnetospheric configuration, there only exists one tail current sheet, contained between a rarefied lobe region which extends outward from the dayside cusp, and a lobe region attached to the nightside cusp. It is found that the tail current always closes to the magnetopause current system, rather than closing in on itself, as suggested by other models. The bow shock position and shape is found to be dependent on Neptune's daily rotation, with maximum standoff being during the pole-on case. Reconnection is found on the magnetopause but is highly modulated by the interplanetary magnetic field (IMF) and time of day, turning āoffā and āonā when the magnetic shear between the IMF and planetary fields is large enough. The simulation shows that the most likely location for reconnection to occur during Voyager 2's flyby was far from the spacecraft trajectory, which may explain the relative lack of associated signatures in the observations
Suprathermal electrons at Saturn's bow shock
The leading explanation for the origin of galactic cosmic rays is particle
acceleration at the shocks surrounding young supernova remnants (SNRs),
although crucial aspects of the acceleration process are unclear. The similar
collisionless plasma shocks frequently encountered by spacecraft in the solar
wind are generally far weaker (lower Mach number) than these SNR shocks.
However, the Cassini spacecraft has shown that the shock standing in the solar
wind sunward of Saturn (Saturn's bow shock) can occasionally reach this
high-Mach number astrophysical regime. In this regime Cassini has provided the
first in situ evidence for electron acceleration under quasi-parallel upstream
magnetic conditions. Here we present the full picture of suprathermal electrons
at Saturn's bow shock revealed by Cassini. The downstream thermal electron
distribution is resolved in all data taken by the low-energy electron detector
(CAPS-ELS, <28 keV) during shock crossings, but the higher energy channels were
at (or close to) background. The high-energy electron detector (MIMI-LEMMS, >18
keV) measured a suprathermal electron signature at 31 of 508 crossings, where
typically only the lowest energy channels (<100 keV) were above background. We
show that these results are consistent with theory in which the "injection" of
thermal electrons into an acceleration process involves interaction with
whistler waves at the shock front, and becomes possible for all upstream
magnetic field orientations at high Mach numbers like those of the strong
shocks around young SNRs. A future dedicated study will analyze the rare
crossings with evidence for relativistic electrons (up to ~1 MeV).Comment: 22 pages, 5 figures. Accepted for publication in Ap
Gaseous-Hydrogen Pressurant Requirements for the Discharge of Liquid Hydrogen from a 3.96 Meter /13 ft/ Diameter Spherical Tank
Hydrogen gas pressure requirements during pressurization and transfer of liquid hydrogen from spherical tank
Simultaneous calculation of the helical pitch and the twist elastic constant in chiral liquid crystals from intermolecular torques
We present a molecular simulation method that yields simultaneously the equilibrium pitch wave number q and the twist elastic constant K2 of a chiral nematic liquid crystal by sampling the torque density. A simulation of an untwisted system in periodic boundary conditions gives the product K2q; a further simulation with a uniform twist applied provides enough information to separately determine the two factors. We test our new method for a model potential, comparing the results with K2q from a thermodynamic integration route, and with K2 from an order fluctuation analysis. We also present a thermodynamic perturbation theory analysis valid in the limit of weak chirality
Magneto-Transport in the Two-Dimensional Lorentz Gas
We consider the two-dimensional Lorentz gas with Poisson distributed hard
disk scatterers and a constant magnetic field perpendicular to the plane of
motion. The velocity autocorrelation is computed numerically over the full
range of densities and magnetic fields with particular attention to the
percolation threshold between hopping transport and pure edge currents. The
Ohmic and Hall conductance are compared with mode-coupling theory and a recent
generalized kinetic equation valid for low densities and small fields. We argue
that the long time tail as persists for non-zero magnetic field.Comment: 7 pages, 14 figures. Uses RevTeX and epsfig.sty. Submitted to
Physical Review
Standard Methods for Bolt-Bearing Testing of Textile Composites
The response of three 2-D braided materials to bolt bearing loading was evaluated using data generated by Boeing Defense and Space Group in Philadelphia, PA. Three test methods, stabilized single shear, unstabilized single shear, and double shear, were compared. In general, these textile composites were found to be sensitive to bolt bearing test methods. The stabilized single shear method yielded higher strengths than the unstabilized single shear method in all cases. The double shear test method always produced the highest strengths but these results may be somewhat misleading. It is therefore recommended that standard material comparisons be made using the stabilized single shear test method. The effects of two geometric parameters, W/D and e/D, were also studied. An evaluation of the effect of the specimen width (W) to hole diameter (D) ratio concluded that bolt bearing responses were consistent with open hole tension results. A W/D ratio of 6 or greater should be maintained. The proximity of the hole to the specimen edge significantly affected strength. In all cases, strength was improved by increasing the ratio of the distance from the hole center to the specimen edge (e) to the hole diameter (D) above 2. An e/D ratio of 3 or greater is recommended
Conscious monitoring and control (reinvestment) in surgical performance under pressure.
Research on intraoperative stressors has focused on external factors without considering individual differences in the ability to cope with stress. One individual difference that is implicated in adverse effects of stress on performance is "reinvestment," the propensity for conscious monitoring and control of movements. The aim of this study was to examine the impact of reinvestment on laparoscopic performance under time pressure
Standard methods for open hole tension testing of textile composites
Sizing effects have been investigated by comparing the open hole failure strengths of each of the four different braided architectures as a function of specimen thickness, hole diameter, and the ratio of specimen width to hole diameter. The data used to make these comparisons was primarily generated by Boeing. Direct comparisons of Boeing's results were made with experiments conducted at West Virginia University whenever possible. Indirect comparisons were made with test results for other 2-D braids and 3-D weaves tested by Boeing and Lockheed. In general, failure strength was found to decrease with increasing plate thickness, increase with decreasing hole size, and decreasing with decreasing width to diameter ratio. The interpretation of the sensitive to each of these geometrical parameters was complicated by scatter in the test data. For open hole tension testing of textile composites, the use of standard testing practices employed by industry, such as ASTM D5766 - Standard Test Method for Open Hole Tensile Strength of Polymer Matrix Composite Laminates should provide adequate results for material comparisons studies
- ā¦