85 research outputs found
Performance of van der Waals Corrected Functionals for Guest Adsorption in the M-2(dobdc) Metal-Organic Frameworks
Small-molecule binding in metal–organic frameworks (MOFs) can be accurately studied both experimentally and computationally, provided the proper tools are employed. Herein, we compare and contrast properties associated with guest binding by means of density functional theory (DFT) calculations using nine different functionals for the M2(dobdc) (dobdc4– = 2,5-dioxido,1,4-benzenedicarboxylate) series, where M = Mg, Mn, Fe, Co, Ni, Cu, and Zn. Additionally, we perform Quantum Monte Carlo (QMC) calculations for one system to determine if this method can be used to assess the performance of DFT. We also make comparisons with previously published experimental results for carbon dioxide and water and present new methane neutron powder diffraction (NPD) data for further comparison. All of the functionals are able to predict the experimental variation in the binding energy from one metal to the next; however, the interpretation of the performance of the functionals depends on which value is taken as the reference. On the one hand, if we compare against experimental values, we would conclude that the optB86b-vdW and optB88-vdW functionals systematically overestimate the binding strength, while the second generation of van der Waals (vdW) nonlocal functionals (vdw-DF2 and rev-vdW-DF2) correct for this providing a good description of binding energies. On the other hand, if the QMC calculation is taken as the reference then all of the nonlocal functionals yield results that fall just outside the error of the higher-level calculation. The empirically corrected vdW functionals are in reasonable agreement with experimental heat of adsorptions but under bind when compared with QMC, while Perdew–Burke–Ernzerhof fails by more than 20 kJ/mol regardless of which reference is employed. All of the functionals, with the exception of vdW-DF2, predict reasonable framework and guest binding geometries when compared with NPD measurements. The newest of the functionals considered, rev-vdW-DF2, should be used in place of vdW-DF2, as it yields improved bond distances with similar quality binding energies
Olsalazine-Based Metal–Organic Frameworks as Biocompatible Platforms for H_2 Adsorption and Drug Delivery
The drug olsalazine (H_4olz) was employed as a ligand to synthesize a new series of mesoporous metal–organic frameworks that are expanded analogues of the well-known M_2(dobdc) materials (dobdc^4– = 2,5-dioxido-1,4-benzenedicarboxylate; M-MOF-74). The M_2(olz) frameworks (M = Mg, Fe, Co, Ni, and Zn) exhibit high surface areas with large hexagonal pore apertures that are approximately 27 Å in diameter. Variable temperature H_2 adsorption isotherms revealed strong adsorption at the open metal sites, and in situ infrared spectroscopy experiments on Mg_2(olz) and Ni_2(olz) were used to determine site-specific H_2 binding enthalpies. In addition to its capabilities for gas sorption, the highly biocompatible Mg_2(olz) framework was also evaluated as a platform for the delivery of olsalazine and other encapsulated therapeutics. The Mg_2(olz) material (86 wt % olsalazine) was shown to release the therapeutic linker through dissolution of the framework under simulated physiological conditions. Furthermore, Mg_2(olz) was used to encapsulate phenethylamine (PEA), a model drug for a broad class of bioactive compounds. Under simulated physiological conditions, Mg_2(olz)(PEA)_2 disassembled to release PEA from the pores and olsalazine from the framework itself, demonstrating that multiple therapeutic components can be delivered together at different rates. The low toxicity, high surface areas, and coordinatively unsaturated metal sites make these M_2(olz) materials promising for a range of potential applications, including drug delivery in the treatment of gastrointestinal diseases
Olsalazine-Based Metal–Organic Frameworks as Biocompatible Platforms for H_2 Adsorption and Drug Delivery
The drug olsalazine (H_4olz) was employed as a ligand to synthesize a new series of mesoporous metal–organic frameworks that are expanded analogues of the well-known M_2(dobdc) materials (dobdc^4– = 2,5-dioxido-1,4-benzenedicarboxylate; M-MOF-74). The M_2(olz) frameworks (M = Mg, Fe, Co, Ni, and Zn) exhibit high surface areas with large hexagonal pore apertures that are approximately 27 Å in diameter. Variable temperature H_2 adsorption isotherms revealed strong adsorption at the open metal sites, and in situ infrared spectroscopy experiments on Mg_2(olz) and Ni_2(olz) were used to determine site-specific H_2 binding enthalpies. In addition to its capabilities for gas sorption, the highly biocompatible Mg_2(olz) framework was also evaluated as a platform for the delivery of olsalazine and other encapsulated therapeutics. The Mg_2(olz) material (86 wt % olsalazine) was shown to release the therapeutic linker through dissolution of the framework under simulated physiological conditions. Furthermore, Mg_2(olz) was used to encapsulate phenethylamine (PEA), a model drug for a broad class of bioactive compounds. Under simulated physiological conditions, Mg_2(olz)(PEA)_2 disassembled to release PEA from the pores and olsalazine from the framework itself, demonstrating that multiple therapeutic components can be delivered together at different rates. The low toxicity, high surface areas, and coordinatively unsaturated metal sites make these M_2(olz) materials promising for a range of potential applications, including drug delivery in the treatment of gastrointestinal diseases
Recommended from our members
Synthesis and O2 Reactivity of a Titanium(III) Metal-Organic Framework.
Metal-organic frameworks featuring pores lined with exposed metal cations have received attention for a wide range of adsorption-related applications. While many frameworks with coordinatively unsaturated M(II) centers have been reported, there are relatively few examples of porous materials with coordinatively unsaturated M(III) centers. Here, we report the synthesis and characterization of Ti3O(OEt)(bdc)3(solv)2 (Ti-MIL-101; bdc(2-) = 1,4-benzenedicarboxylate; solv = N,N-dimethylformamide, tetrahydrofuran), the first metal-organic framework containing exclusively Ti(III) centers. Through a combination of gas adsorption, X-ray diffraction, magnetic susceptibility, and electronic and vibrational spectroscopy measurements, this high-surface-area framework is shown to contain five-coordinate Ti(III) centers upon desolvation, which irreversibly bind O2 to form titanium(IV) superoxo and peroxo species. Electronic absorption spectra suggest that the five-coordinate Ti(III) sites adopt a distorted trigonal-bipyramidal geometry that effectively shields nuclear charge and inhibits strong adsorption of nonredox-active gases
A cooperative adsorbent for the switch-like capture of carbon dioxide from crude natural gas
Natural gas constitutes a growing share of global primary energy due to its abundant supply and lower CO2 emission intensity compared to coal. For many natural gas reserves, CO2 contamination must be removed at the wellhead to meet pipeline specifications. Here, we demonstrate the potential of the diamine-appended metal-organic framework ee-2-Mg2(dobpdc) (ee-2 = N,N-diethylethylenediamine; dobpdc4- = 4,4'-dioxidobiphenyl-3,3'-dicarboxylate) as a next-generation CO2 capture material for high-pressure natural gas purification. Owing to a cooperative adsorption mechanism involving formation of ammonium carbamate chains, ee-2-Mg2(dobpdc) can be readily regenerated with a minimal change in temperature or pressure and maintains its CO2 capacity in the presence of water. Moreover, breakthrough experiments reveal that water enhances the CO2 capture performance of ee-2-Mg2(dobpdc) by eliminating "slip" of CO2 before full breakthrough. Spectroscopic characterization and multicomponent adsorption isobars suggest that the enhanced performance under humid conditions arises from preferential stabilization of the CO2-inserted phase in the presence of water. The favorable performance of ee-2-Mg2(dobpdc) is further demonstrated through comparison with a benchmark material for this separation, zeolite 13X, as well as extended pressure cycling. Overall, these results support continued development of ee-2-Mg2(dobpdc) as a promising adsorbent for natural gas purification
Highly Selective Quantum Sieving of D2 from H2 by a Metal–Organic Framework As Determined by Gas Manometry and Infrared Spectroscopy
The quantum sieving effect between D2 and H2 is examined for a series of metal–organic frameworks (MOFs) over the temperature range 77–150 K. Isothermal adsorption measurements demonstrate a consistently larger isosteric heat of adsorption for D2 vs H2, with the largest difference being 1.4 kJ/mol in the case of Ni-MOF-74. This leads to a low-pressure selectivity for this material that increases from 1.5 at 150 K to 5.0 at 77 K. Idealized adsorption solution theory indicates that the selectivity decreases with increasing pressure, but remains well above unity at ambient pressure. Infrared measurements on different MOF materials show a strong correlation between selectivity and the frequency of the adsorbed H2 translational band. This confirms that the separation is predominantly due to the difference in the zero-point energies of the adsorbed isotopologues
- …