Supported Gold Nanoparticles for Alcohols Oxidation in Continuous-Flow Heterogeneous Systems

Gold nanoparticles (AuNPs) were anchored on alkynyl carbamate-functionalized support materials having the suitable features for application as catalysts in continuous-flow packed bed reactors. The functionalization step was carried out by grafting with the di-functional organosilane [3-(2-propynylcarbamate)propyl]triethoxysilane (PPTEOS) three commercial micrometer-sized oxide supports, i.e. silica, alumina, and titania. The alkynyl-carbamate moieties were capable to straightforwardly reduce the gold precursor HAuCl4 yielding the supported AuNPs systems Au/SiO2@Yne, Au/Al2O3@Yne, and Au/TiO2@Yne. A comparison among the three materials revealed that silica allowed the highest organic functionalization (12 wt%) as well as the highest gold loading (3.7 wt%). Moreover, TEM investigation showed only for Au/SiO2@Yne the presence of homogeneously distributed, spherically shaped AuNPs (av. diameter 15 nm). Au/SiO2@Yne is an efficient catalyst, both in batch and flow conditions, in the oxidation of a large variety of alcohols, using H2O2 as oxidizing agent, at a temperature of 90 \ub0C. Furthermore, under flow conditions, the catalyst worked for over 50 h without any significant decrease in the catalytic activity. The catalytic activity of the three catalysts was evaluated and compared in the oxidation of 1-phenylethanol as a model substrate. We found that the flow approach plays a strategic role in preserving the physical and chemical integrity of the solid catalysts during its use, with remarkable consequences for the reaction conversion (from 2% in batch to 80 % in flow) in the case of Au/TiO2@Yne

Production of Composite Zinc Oxide–Polylactic Acid Radiopaque Filaments for Fused Deposition Modeling: First Stage of a Feasibility Study

Three-dimensional printing technologies are becoming increasingly attractive for their versatility; the geometrical customizability and manageability of the final product properties are the key points. This work aims to assess the feasibility of producing radiopaque filaments for fused deposition modeling (FDM), a 3D printing technology, starting with zinc oxide (ZnO) and polylactic acid (PLA) as the raw materials. Indeed, ZnO and PLA are promising materials due to their non-toxic and biocompatible nature. Pellets of PLA and ZnO in the form of nanoparticles were mixed together using ethanol; this homogenous mixture was processed by a commercial extruder, optimizing the process parameters for obtaining mechanically stable samples. Scanning electron microscopy analyses were used to assess, in the extruded samples, the homogenous distribution of the ZnO in the PLA matrix. Moreover, X-ray microtomography revealed a certain homogenous radiopacity; this imaging technique also confirmed the correct distribution of the ZnO in the PLA matrix. Thus, our tests showed that mechanically stable radiopaque filaments, ready for FDM systems, were obtained by homogenously loading the PLA with a maximum ZnO content of 6.5% wt. (nominal). This study produced multiple outcomes. We demonstrated the feasibility of producing radiopaque filaments for additive manufacturing using safe materials. Moreover, each phase of the process is cost-effective and green-oriented; in fact, the homogenous mixture of PLA and ZnO requires only a small amount of ethanol, which evaporates in minutes without any temperature adjustment. Finally, both the extruding and the FDM technologies are the most accessible systems for the additive manufacturing commercial apparatuses