Viscoelastic behavior of a polyester resin concrete reinforced with nonmetallic bars under bending loads

This paper deals with the study of a highly durable polyester polymer concrete reinforced with glass fibre reinforced polymer rebars. The paper describes the properties of this specific concrete, which were tested using different experimental techniques such as porosimetry, scanning electron microscopy and petrography. Likewise, characterisation in a macro-scale was carried out to define the mechanical properties of the material (modulus of elasticity, stress-strain curve, ultimate strength and bond). Based on the latter properties, the paper presents a relatively simple method to estimate the ultimate bearing capacity of beams under bending load. The calculation method has been verified by testing beams and full-scale elements. At the end, and due to the viscoelastic nature of the polymer, several considerations will be made in order identify safety factors dependent on the loads nature: permanent loads (deferred deformations) and live loads.Peer ReviewedPostprint (author’s final draft

Enhancing the First-Pass Effect in Acute Stroke: The Impact of Stent Retriever Characteristics

Introduction: Although stentrievers (SRs) have been a mainstay of mechanical thrombectomy (MT), and current guidelines recommend the use of SRs in the treatment of large vessel occlusion stroke (LVO), there is a paucity of studies in the literature comparing SRs directly against each other in terms of mechanical and functional properties. Timely access to endovascular therapy and the ability to restore intracranial flow in a safe, efficient, and efficacious manner have been critical to the success of MT. This study aimed to investigate the impact of contemporary SR characteristics, including model, brand, size, and length, on the first-pass effect (FPE) in patients with acute ischemic stroke. Methods: Consecutive patients with M1 occlusion treated with a single SR+BGC were recruited from the ROSSETTI registry. The primary outcome was the FPE that was defined as modified (mFPE) or true (tFPE) for the achievement of modified thrombolysis in cerebral infarction (mTICI) grades 2b-3 or 3 after a single device pass, respectively. We compared patients who achieved mFPE with those who achieved tFPE according to SR characteristics. Results: We included 610 patients (52.3% female and 47.7% male, mean age 75.1 +/- 13.62 years). mFPE was achieved in 357 patients (58.5%), whereas tFPE was achieved in 264 (43.3%). There was no significant association between SR characteristics and mFPE or tFPE. Specifically, the SR size did not show a statistically significant relationship with improvement in FPE. Similarly, the length of the SR did not yield significant differences in the mFPE and tFPE, even when the data were grouped. Conclusions: Our data indicate that contemporary SR-mediated thrombectomy characteristics, including model, brand, size, and length, do not significantly affect the FPE

Critically short telomeres and toxicity of chemotherapy in early breast cancer

Cumulative toxicity from weekly paclitaxel (myalgia, peripheral neuropathy, fatigue) compromises long-term administration. Preclinical data suggest that the burden of critically short telomeres ( 21.9% CSTs) had 2-fold higher number of neuropathy (P = 0.04) or fatigue (P = 0.019) episodes and >3-fold higher number of myalgia episodes (P = 0.005). The average telomere length was unrelated to the incidence of side effects.The percentage of CSTs, but not the average telomere size, is associated with weekly paclitaxel-derived toxicity.This work was supported by the Fondo de Investigación Sanitaria [FIS PI10/00288 and FIS PI13/00430]; AECC Scientific Foundation [Beca de Retorno-2010, to MQF]; Spanish Ministry of Economy and Competitiveness Projects [SAF2013-45111-R]; Madrid Regional Government Projects [S2010/BMD- 2303]; AXA Research Found; Fundación Botin; AVON Spain; and Boehringer-Ingelheim Spain.S

Capabilities of Nanostructured Tungsten for Plasma Facing Material

One of the bottle necks for fusion to become a reality is the lack of materials able to withstand the harsh conditions taken place in a reactor environment. In particular, plasma facing materials (PFM) have to resist large radiation fluxes and thermal loads. Nowadays, tungsten is one of the most attractive materials proposed for PFM. However, it is known that the irradiation of tungsten with H leads to surface blistering and subsequent cracking and exfoliation which is unacceptable. In particular, these effects have been observed to be more severe when W is subjected to pulse irradiation

Production of He-4 and (4) in Pb-Pb collisions at root(NN)-N-S=2.76 TeV at the LHC

Results on the production of He-4 and (4) nuclei in Pb-Pb collisions at root(NN)-N-S = 2.76 TeV in the rapidity range vertical bar y vertical bar <1, using the ALICE detector, are presented in this paper. The rapidity densities corresponding to 0-10% central events are found to be dN/dy4(He) = (0.8 +/- 0.4 (stat) +/- 0.3 (syst)) x 10(-6) and dN/dy4 = (1.1 +/- 0.4 (stat) +/- 0.2 (syst)) x 10(-6), respectively. This is in agreement with the statistical thermal model expectation assuming the same chemical freeze-out temperature (T-chem = 156 MeV) as for light hadrons. The measured ratio of (4)/He-4 is 1.4 +/- 0.8 (stat) +/- 0.5 (syst). (C) 2018 Published by Elsevier B.V.Peer reviewe

Forward-central two-particle correlations in p-Pb collisions at root s(NN)=5.02 TeV

Two-particle angular correlations between trigger particles in the forward pseudorapidity range (2.5 2GeV/c. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B. V.Peer reviewe

Azimuthal anisotropy of charged jet production in root s(NN)=2.76 TeV Pb-Pb collisions

We present measurements of the azimuthal dependence of charged jet production in central and semi-central root s(NN) = 2.76 TeV Pb-Pb collisions with respect to the second harmonic event plane, quantified as nu(ch)(2) (jet). Jet finding is performed employing the anti-k(T) algorithm with a resolution parameter R = 0.2 using charged tracks from the ALICE tracking system. The contribution of the azimuthal anisotropy of the underlying event is taken into account event-by-event. The remaining (statistical) region-to-region fluctuations are removed on an ensemble basis by unfolding the jet spectra for different event plane orientations independently. Significant non-zero nu(ch)(2) (jet) is observed in semi-central collisions (30-50% centrality) for 20 <p(T)(ch) (jet) <90 GeV/c. The azimuthal dependence of the charged jet production is similar to the dependence observed for jets comprising both charged and neutral fragments, and compatible with measurements of the nu(2) of single charged particles at high p(T). Good agreement between the data and predictions from JEWEL, an event generator simulating parton shower evolution in the presence of a dense QCD medium, is found in semi-central collisions. (C) 2015 CERN for the benefit of the ALICE Collaboration. Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).Peer reviewe

Event-shape engineering for inclusive spectra and elliptic flow in Pb-Pb collisions at root(NN)-N-S=2.76 TeV

Peer reviewe

The impact of surgical delay on resectability of colorectal cancer: An international prospective cohort study

AIM: The SARS-CoV-2 pandemic has provided a unique opportunity to explore the impact of surgical delays on cancer resectability. This study aimed to compare resectability for colorectal cancer patients undergoing delayed versus non-delayed surgery. METHODS: This was an international prospective cohort study of consecutive colorectal cancer patients with a decision for curative surgery (January-April 2020). Surgical delay was defined as an operation taking place more than 4 weeks after treatment decision, in a patient who did not receive neoadjuvant therapy. A subgroup analysis explored the effects of delay in elective patients only. The impact of longer delays was explored in a sensitivity analysis. The primary outcome was complete resection, defined as curative resection with an R0 margin. RESULTS: Overall, 5453 patients from 304 hospitals in 47 countries were included, of whom 6.6% (358/5453) did not receive their planned operation. Of the 4304 operated patients without neoadjuvant therapy, 40.5% (1744/4304) were delayed beyond 4 weeks. Delayed patients were more likely to be older, men, more comorbid, have higher body mass index and have rectal cancer and early stage disease. Delayed patients had higher unadjusted rates of complete resection (93.7% vs. 91.9%, P = 0.032) and lower rates of emergency surgery (4.5% vs. 22.5%, P < 0.001). After adjustment, delay was not associated with a lower rate of complete resection (OR 1.18, 95% CI 0.90-1.55, P = 0.224), which was consistent in elective patients only (OR 0.94, 95% CI 0.69-1.27, P = 0.672). Longer delays were not associated with poorer outcomes. CONCLUSION: One in 15 colorectal cancer patients did not receive their planned operation during the first wave of COVID-19. Surgical delay did not appear to compromise resectability, raising the hypothesis that any reduction in long-term survival attributable to delays is likely to be due to micro-metastatic disease