Conditional stability of particle alignment in finite-Reynolds-number channel flow

Finite-size neutrally buoyant particles in a channel flow are known to accumulate at specific equilibrium positions or spots in the channel cross-section if the flow inertia is finite at the particle scale. Experiments in different conduit geometries have shown that while reaching equilibrium locations, particles tend also to align regularly in the streamwise direction. In this paper, the Force Coupling Method was used to numerically investigate the inertia-induced particle alignment, using square channel geometry. The method was first shown to be suitable to capture the quasi-steady lift force that leads to particle cross-streamline migration in channel flow. Then the particle alignment in the flow direction was investigated by calculating the particle relative trajectories as a function of flow inertia and of the ratio between the particle size and channel hydraulic diameter. The flow streamlines were examined around the freely rotating particles at equilibrium, revealing stable small-scale vortices between aligned particles. The streamwise inter-particle spacing between aligned particles at equilibrium was calculated and compared to available experimental data in square channel flow (Gao {\it et al.} Microfluidics and Nanofluidics {\bf 21}, 154 (2017)). The new result highlighted by our numerical simulations is that the inter-particle spacing is unconditionally stable only for a limited number of aligned particles in a single train, the threshold number being dependent on the confinement (particle-to-channel size ratio) and on the Reynolds number. For instance, when the particle Reynolds number is $\approx1$ and the particle-to-channel height size ratio is $\approx0.1$, the maximum number of stable aligned particles per train is equal to 3. This agrees with statistics realized on the experiments of (Gao {\it et al.} Microfluidics and Nanofluidics {\bf 21}, 154 (2017)).Comment: 13 pages, 13 figure

Migration of finite sized particles in a laminar square channel flow from low to high Reynolds numbers

The migration of neutrally buoyant finite sized particles in a Newtonian square channel flow is investigated in the limit of very low solid volumetric concentration, within a wide range of channel Reynolds numbers Re = [0.07-120]. In situ microscope measurements of particle distributions, taken far from the channel inlet (at a distance several thousand times the channel height), revealed that particles are preferentially located near the channel walls at Re > 10 and near the channel center at Re 10). In this regime, we show that (i) the particle undergoes cross-streamline migration followed by a cross-lateral migration (parallel to the wall) in agreement with previous observations, and (ii) the stable equilibrium positions are located at the midline of the channel faces while the diagonal equilibrium positions are unstable. At low flow inertia, the first instants of the numerical simulations (carried at Re = O(1)) reveal that the cross-streamline migration of a single particle is oriented towards the channel wall, suggesting that the particle preferential positions around the channel center, observed in the experiments, are rather due to multi-body interactions

Self-ordered particle trains in inertial microchannel flows

Controlling the transport of particles in flowing suspensions at microscale is of interest in numerous contexts such as the development of miniaturized and point-of-care analytical devices (in bioengineering, for foodborne illnesses detection, etc.) and polymer engineering. In square microchannels, neutrally buoyant spherical particles are known to migrate across the flow streamlines and concentrate at specific equilibrium positions located at the channel centerline at low flow inertia and near the four walls along their symmetry planes at moderate Reynolds numbers. Under specific flow and geometrical conditions, the spherical particles are also found to line up in the flow direction and form evenly spaced trains. In order to statistically explore the dynamics of train formation and their dependence on the physical parameters of the suspension flow (particle-to-channel size ratio, Reynolds number and solid volume fraction), experiments have been conducted based on in situ visualizations of the flowing particles by optical microscopy. The trains form only once particles have reached their equilibrium positions (following lateral migration). The percentage of particles in trains and the interparticle distance in a train have been extracted and analyzed. The percentage of particles organized in trains increases with the particle Reynolds number up to a threshold value which depends on the concentration and then decreases for higher values. The average distance between the surfaces of consecutive particles in a train decreases as the particle Reynolds number increases and is independent of the particles size and concentration, if the concentration remains below a threshold value related to the degree of confinement of the suspension flow

Transport of Non-Spherical Particles in Square Microchannel Flows: A Review

International audienceUnderstanding the behavior of a single particle flowing in a microchannel is a necessary step in designing and optimizing efficient microfluidic devices for the separation, concentration, counting, detecting, sorting, or mixing of particles in suspension. Although the inertial migration of spherical particles has been deeply investigated in the last two decades, most of the targeted applications involve shaped particles whose behavior in microflows is still far from being completely understood. While traveling in a channel, a particle both rotates and translates: it translates in the streamwise direction driven by the fluid flow but also in the cross-section perpendicular to the streamwise direction due to inertial effects. In addition, particles’ rotation and translation motions are coupled. Most of the existing works investigating the transport of particles in microchannels decouple their rotational and lateral migration behaviors: particle rotation is mainly studied in simple shear flows, whereas lateral migration is neglected, and studies on lateral migration mostly focus on spherical particles whose rotational behavior is simple. The aim of this review is to provide a summary of the different works existing in the literature on the inertial migration and the rotational behavior of non-spherical particles with a focus and discussion on the remaining scientific challenges in this fiel

A review on inertial focusing of particles in microchannels for separation and other applications

International audienceno abstrac

A review on inertial focusing of particles in microchannels for separation and other applications

International audienceno abstrac

Inertial Migration of Neutrally Buoyant Spherical Particles in Square Channels at Moderate and High Reynolds Numbers

International audienceThe inertial migration of particles in microchannel flows has been deeply investigated in the last two decades. In spite of numerous reports on the inertial focusing patterns in a square channel, the particle inertial focusing and longitudinal ordering processes remain unclear at high Reynolds numbers (>200) in square microchannels smaller than 100 µm in width. Thus, in this work, in situ visualization of particles flowing in square micro-channels at Reynolds numbers Re ranging from 5 to 280 has been conducted and their migration behaviors have been analyzed. The obtained results confirm that new equilibrium positions appear above a critical Re depending on the particle to channel size ratio and the particle volume fraction. It is also shown that, for a given channel length, an optimal Reynolds number can be identified, for which the ratio of particles located on equilibrium positions is maximal. Moreover, the longitudinal ordering process, i.e., the formation of trains of particles on equilibrium positions and the characterization of their length, has also been analyzed for the different flow conditions investigated in this study

Conditional stability of particle alignment in finite-Reynolds-number channel flow

International audienceFinite-size neutrally buoyant particles in a channel flow are known to accumulate at specific equilibrium positions or spots in the channel cross-section, if the flow inertia is finite at the particle scale. Experiments in different conduit geometries have shown that while reaching equilibrium locations, particles tend also to align regularly in the streamwise direction. In this paper, the force coupling method was used to numerically investigate the inertia-induced particle alignment, using square-channel geometry. The method was first shown to be suitable to capture the quasisteady lift force that leads to particle cross-streamline migration in channel flow. Then the particle alignment in the flow direction was investigated by calculating the particle relative trajectories as a function of flow inertia and of the ratio between the particle size and channel hydraulic diameter. The flow streamlines were examined around the freely rotating particles at equilibrium, revealing stable small-scale vortices between aligned particles. The streamwise interparticle spacing between aligned particles at equilibrium was calculated and compared to available experimental data in square-channel flow [Gao et al., Microfluid. Nanofluid. 21, 154 (2017)]. The new result highlighted by our numerical simulations is that the interparticle spacing is unconditionally stable only for a limited number of aligned particles in a single train, the threshold number being dependent on the confinement (particle-to-channel size ratio) and on the Reynolds number. For instance, when the particle Reynolds number is ≈1 and the particle-to-channel height size ratio is ≈0.1, the maximum number of stable aligned particles per train is equal to 3. This agrees with statistics realized on the experiments of [Gao et al., Microfluid. Nanofluid. 21, 154 (2017)]. It is argued that when several particles are hydrodynamically connected moving as a unique structure (the train) with a steady streamwise velocity, large-scale hydrodynamic perturbations induced at the train scale prohibit small-scale vortex connection between the leading and second particles, forcing the leading particle to leave the train

Inertial lateral migration and self-assembly of particles in bidisperse suspensions in microchannel flows

International audienc

Lateral migration of particles in square micro-channels at low flow inertia

International audienceControlling the transport of particles inflowing suspensions is relevantin a number of contextsranging from bio-engineering and medicine to food engineering. However, the seemingly simple question, “What are the trajectories ofmicroscopic particles transported in a given flow?” can rarely be answered up to date due to the high complexity of the situations encountered in real conditions. At moderate Reynoldsnumbers, neutrally buoyant spherical particlesare known to migrate laterally in wall bounded flows and concentrate at specific equilibrium positions located near the channel wall.In the present work, a second regime of migration is highlighted: at low flow inertia, particles migrate towards the channel center. This second regime of migration is experimentally studiedthanks to the two experimental set-ups developed and already validated at moderate Reynoldsnumbers[1-2]. The first one, based on classical on-line microscopy is used to visualize in situ the suspensions flowing in micro-channels. In the second one, fluorescent particles are harvested on a plane membrane fixed perpendicularly to the flow direction and further observed by fluorescent microscopy. Fromthe obtained distributions at different distances from channel inlet, Reynolds numbers, particle to channel sizeratios and volume fractions, the competition between the two migration regimes,towards the channel center or towards the channel wall,is analyze