Tunable fibre-coupled multiphoton microscopy with a negative curvature fibre

Negative curvature fibre (NCF) guides light in its core by inhibiting the coupling of core and cladding modes. In this work, an NCF was designed and fabricated to transmit ultrashort optical pulses for multiphoton microscopy with low group velocity dispersion (GVD) at 800 nm. Its attenuation was measured to be <0.3 dB m(-1) over the range 600-850 nm and the GVD was -180 ± 70 fs(2)  m(-1) at 800 nm. Using an average fibre output power of ∼20 mW and pulse repetition rate of 80 MHz, the NCF enabled pulses with a duration of <200 fs to be transmitted through a length of 1.5 m of fibre over a tuning range of 180 nm without the need for dispersion compensation. In a 4 m fibre, temporal and spectral pulse widths were maintained to within 10% of low power values up to the maximum fibre output power achievable with the laser system used of 278 mW at 700 nm, 808 mW at 800 nm and 420 mW at 860 nm. When coupled to a multiphoton microscope, it enabled imaging of ex vivo tissue using excitation wavelengths from 740 nm to 860 nm without any need for adjustments to the set-up

Assessing spatial flood vulnerability at kalapara upazila in Bangladesh using an analytic hierarchy process

© 2019 by the authors. Licensee MDPI, Basel, Switzerland. Floods are common natural disasters worldwide, frequently causing loss of lives and huge economic and environmental damages. A spatial vulnerability mapping approach incorporating multi-criteria at the local scale is essential for deriving detailed vulnerability information for supporting flood mitigation strategies. This study developed a spatial multi-criteria-integrated approach of flood vulnerability mapping by using geospatial techniques at the local scale. The developed approach was applied on Kalapara Upazila in Bangladesh. This study incorporated 16 relevant criteria under three vulnerability components: physical vulnerability, social vulnerability and coping capacity. Criteria were converted into spatial layers, weighted and standardised to support the analytic hierarchy process. Individual vulnerability component maps were created using a weighted overlay technique, and then final vulnerability maps were produced from them. The spatial extents and levels of vulnerability were successfully identified from the produced maps. Results showed that the areas located within the eastern and south-western portions of the study area are highly vulnerable to floods due to low elevation, closeness to the active channel and more social components than other parts. However, with the integrated coping capacity, western and south-western parts are highly vulnerable because the eastern part demonstrated particularly high coping capacity compared with other parts. The approach provided was validated by qualitative judgement acquired from the field. The findings suggested the capability of this approach to assess the spatial vulnerability of flood effects in flood-affected areas for developing effective mitigation plans and strategies

Prognostic value of FOXP3 and TGF-b expression in both peripheral blood and lymph nodes in patients with B-Non Hodgkin’s lymphoma

Foxp3 has been studied as a biomarker of Treg cells in many solid malignant diseases, although its role as an immunomodulator in B-NHL remain poorly understood and the effect of traditional chemotherapy on its expression remains unclear. In this study the role of circulating and intra-tumoral Treg and TGF-b in patients with B-NHL before and after chemotherapy was evaluated. Enumeration of Treg cells was carried out by flow cytometric staining of their cell surface markers CD4 and CD25 as well as by molecular analysis of its signature transcription factor FoxP3. Expression of FoxP3 was done using quantitative real-time PCR while TGF-b mRNA expression was semi-quantitatively assayed by the conventional reverse transcription-PCR. In addition, spontaneous versus mitogen-induced release of TGF-b by PBMCs was assessed by a short term cell culture followed by ELISA. This was done before and after six cycles of CHOP chemotherapy. The results were evaluated in relation to the clinicopathological data.A significant increase in mRNA transcripts of both Fox P3 and TGF-b as well as the percentage of CD4+/CD25+ in B-NHL patients before receiving the chemotherapy were recorded, when compared either to healthy controls or to patients after completion the treatment regimen. Interestingly 6 cycles of CHOP treatment caused significant reduction in all parameters under study, relative to the situation before treatment. A significant enhancement in spontaneous TGF-b release in B-NHL patient either before or after chemotherapy was obtained. These results strongly confirm the possible involvement of Treg cells and TGF-b in orienting the clinical course of the disease as well as the ability of targeting them in immunotherapeutic approaches. KEYWORDS FOXP3; TGF; Non Hodgkin’s lymphoma; NH

Reconstructing historic Glacial Lake Outburst Floods through numerical modelling and geomorphological assessment:Extreme events in the Himalaya

Recession of high‐mountain glaciers in response to climatic change frequently results in the development of moraine‐dammed glacial lakes. Moraine dam failure is often accompanied by the release of large volumes of water and sediment, termed a Glacial Lake Outburst Flood (GLOF). Chukhung Glacier is a small (~3 km2) receding valley glacier in Mt. Everest (Sagarmatha) National Park, Nepal. Unlike many Himalayan glaciers, which possess a thick mantle of supraglacial debris, its surface is relatively clean. The glacier terminus has receded 1.3 km from its maximum Holocene position, and in doing so provided the space for an ice‐contact moraine‐dammed lake to develop. The lake had a maximum volume of 5.5 × 105 m3 and drained as a result of breaching of the terminal moraine. An estimated 1.3 × 105 m3 of material was removed from the terminal moraine during breach development. Numerical dam‐breach modelling, implemented within a Generalised Likelihood Uncertainty Estimation (GLUE) framework, was used to investigate a range of moraine‐dam failure scenarios. Reconstructed outflow peak discharges, including failure via overtopping and piping mechanisms, are in the range 146–2200 m3 s‐1. Results from two‐dimensional hydrodynamic GLOF modelling indicate that maximum local flow depths may have exceeded 9 m, with maximum flow velocities exceeding 20 m s‐1 within 700 m of the breach. The floodwaters mobilised a significant amount of material, sourced mostly from the expanding breach, forming a 300 m long and 100 m wide debris fan originating at the breach exit. moraine‐dam. These results also suggest that inundation of the entire floodplain may have been achieved within ten minutes of initial breach development, suggesting that debris fan development was rapid. We discuss the key glaciological and geomorphological factors that have determined the evolution of a hazardous moraine‐dammed lake complex and the subsequent generation of a GLOF and its geomorphological impact

ECU-oriented models for NOx prediction. Part 1: a mean value engine model for NOx prediction

The implantation of nitrogen oxide sensors in diesel engines was proposed in order to track the emissions at the engine exhaust, with applications to the control and diagnosis of the after-treatment devices. However, the use of models is still necessary since the output from these sensors is delayed and filtered. The present paper deals with the problem of nitrogen oxide estimation in turbocharged diesel engines combining the information provided by both models and sensors. In Part 1 of this paper, a control-oriented nitrogen oxide model is designed. The model is based on the mapping of the nitrogen oxide output and a set of corrections which account for the variations in the intake and ambient conditions, and it is designed for implementation in commercial electronic control units. The model is sensitive to variations in the engine's air path, which is solved through the engine volumetric efficiency and the first-principle equations but disregards the effect of variation in the injection settings. In order to consider the effect of the thermal transients on the in-cylinder temperature, the model introduces a dynamic factor. The model behaves well in both steady-state operation and transient operation, achieving a mean average error of 7% in the steady state and lower than 10% in an exigent sportive driving mountain profile cycle. The relatively low calibration effort and the model accuracy show the feasibility of the model for exhaust gas recirculation control as well as onboard diagnosis of the nitrogen oxide emissions.Guardiola, C.; Pla Moreno, B.; Blanco-Rodriguez, D.; Calendini, PO. (2015). ECU-oriented models for NOx prediction. Part 1: a mean value engine model for NOx prediction. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 229(8):992-1015. doi:10.1177/0954407014550191S9921015229

Pyrite oxidation inhibition by a cross-linked lipid coating

The effect of a diacetylene-containing phospholipid on the oxidation of pyrite, FeS(2), was investigated. Earlier work reported by our research group showed that the adsorption of l,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine on pyrite suppressed the extent of its oxidation by about 75% over a specific time period. Results presented here show that the pre-exposure to UV radiation of this lipid after sorption onto pyrite results in a 90% suppression. Attenuated total reflection (ATR) Fourier transform infra-red spectroscopy (FTIR) suggests that the UV irradiation of the lipid does not result in degradation of the adsorbed layer. It is believed that the UV exposure results in the cross-linking and polymerization of the adsorbed phospholipid into a relatively impermeable barrier that separates the pyrite from the aqueous phase. The results of this study might have implications for the protection of pyrite from oxidation in the environment