Wall-thickness-dependent strength of nanotubular ZnO

We fabricate nanotubular ZnO with wall thickness of 45, 92, 123 nm using nanoporous gold (np-Au) with ligament diameter at necks of 1.43 mu m as sacrificial template. Through micro-tensile and micro-compressive testing of nanotubular ZnO structures, we find that the exponent m in (sigma) over bar proportional to (rho) over bar (m), where (sigma) over bar is the relative strength and (rho) over bar is the relative density, for tension is 1.09 and for compression is 0.63. Both exponents are lower than the value of 1.5 in the Gibson-Ashby model that describes the relation between relative strength and relative density where the strength of constituent material is independent of external size, which indicates that strength of constituent ZnO increases as wall thickness decreases. We find, based on hole-nanoindentation and glazing incidence X-ray diffraction, that this wall-thickness-dependent strength of nanotubular ZnO is not caused by strengthening of constituent ZnO by size reduction at the nanoscale. Finite element analysis suggests that the wall-thickness-dependent strength of nanotubular ZnO originates from nanotubular structures formed on ligaments of np-Au

Constitutive TL1A (TNFSF15) Expression on Lymphoid or Myeloid Cells Leads to Mild Intestinal Inflammation and Fibrosis

TL1A is a member of the TNF superfamily and its expression is increased in the mucosa of inflammatory bowel disease patients. Moreover, a subset of Crohn's disease (CD) patients with the risk TL1A haplotype is associated with elevated TL1A expression and a more severe disease course. To investigate the in vivo role of elevated TL1A expression, we generated two transgenic (Tg) murine models with constitutive Tl1a expression in either lymphoid or myeloid cells. Compared to wildtype (WT) mice, constitutive expression of Tl1a in either lymphoid or myeloid cells showed mild patchy inflammation in the small intestine, which was more prominent in the ileum. In addition, mice with constitutive Tl1a expression exhibited enhanced intestinal and colonic fibrosis compared to WT littermates. The percentage of T cells expressing the gut homing chemokine receptors CCR9 and CCR10 was higher in the Tl1a Tg mice compared to WT littermates. Sustained expression of Tl1A in T cells also lead to increased Foxp3+ Treg cells. T cells or antigen presenting cells (APC) with constitutive expression of Tl1a were found to have a more activated phenotype and mucosal mononuclear cells exhibit enhanced Th1 cytokine activity. These results indicated an important role of TL1A in mucosal T cells and APC function and showed that up-regulation of TL1A expression can promote mucosal inflammation and gut fibrosis

Lawson criterion for ignition exceeded in an inertial fusion experiment

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion

Evolution of steady-state material properties during catalysis: Oxidative coupling of methanol over nanoporous Ag0.03Au0.97

Activating pretreatments are used to tune surface composition and structure of bimetallic-alloy catalysts. Herein, the activation-induced changes in material properties of a nanoporous Ag0.03Au0.97 alloy and their subsequent evolution under steady-state CH3OH oxidation conditions are investigated. Activation using O3 results in AgO and Au2O3, strongly enriching the near-surface region in Ag. These oxides reduce in the O2/CH3OH mixture, yielding CO2 and producing a highly Ag-enriched surface alloy. At the reaction temperature (423 K), Ag realloys gradually with Au but remains enriched (stabilized by surface O) in the top few nanometers, producing methyl formate selectively without significant deactivation. At higher temperatures, bulk diffusion induces sintering and Ag redistribution, leading to a loss of activity. These findings demonstrate that material properties determining catalytic activity are dynamic and that metastable (kinetically trapped) forms of the material may be responsible for catalysis, providing guiding principles concerning the activation of heterogeneous catalysts for selective oxidation

Four-Dimensional Imaging of ZnO-Coated Alumina Aerogels by Scanning Transmission X-ray Microscopy and Ptychographic Tomography

Functional porous materials are of increasing importance in energy conversion and catalysis. Improved analysis is needed to guide optimization. Four-dimensional (4D) imaging [chemical mapping in three-dimensional (3D) by spectro-tomography] of an Al2O3 aerogel coated with ZnO by atomic layer deposition was performed using soft X-ray ptychography at the Zn L-edge. A two-dimensional spatial resolution of 14(2) nm was achieved. Visualizations of the 3D chemical structure are provided. The degree of ZnO coverage of the surface of the Al2O3 aerogel framework in two different samples was estimated and found to be both thicker and less homogeneous than expected. Other analyses of the 4D results, including the degree of contact between Al2O3 and ZnO, were extracted from the reconstructed 3D data. This pioneering soft X-ray spectro-ptycho-tomography study will anchor further studies of functional porous materials