Radiation and Chemical Reaction Effects on Unsteady MHD Free Convective Periodic Heat Transport Modeling In a Saturated Porous Medium for Arotating System

A rotating model is extended for a two-dimensional, unsteady, incompressible electrically conducting, laminar immediate convection boundary layer flow of light and mass communicate in a saturated porous crystal ball gazer, among an overall vertical porous surface in the perseverance of radiation and vicious circle effects was considered. The fundamental equations governing the flow are in the art an element of partial differential equations and have been reduced to a inhere of non-linear ordinary differential equations by applying suitable similarity transformations. The problem is tackled analytically using classical two term perturbation technique. Pertinent results with respect to embedded parameters are displayed through graphically for the velocity, Temperature, concentration, skin friction, Sherwood number, Nusselt number are discussed qualitatively

PROCESS AND PARAMETERS AFFECTING DRUG RELEASE PERFORMANCE OF PREPARED CROSS-LINKED ALGINATE HYDROGEL BEADS FOR EZETIMIBE

Objective: The objective of this study was to formulate an oral sustained release delivery system of ezetimibe mucoadhesive beads by ionic gelation technique based on sodium alginate used as a hydrophilic carrier in combination with carbopol 934P which acts as a rate modifier.Methods: Microbeads of ezetimibe were prepared using an easy method of ionotropic gelation by little modification while in addition of drug. The prepared beads were characterised for mean particle size, entrapment efficiency, swelling capacity, and in vitro release. They were also subjected to various studies such as Fourier Transform Infrared Spectrophotometer (FTIR) Spectroscopy for drug polymer reaction, Scanning Electron Microscopy for surface morphology, and Differential Scanning Calorimetric Analysis to determine the physical state of the drug in the beads.Results: The microspheres of ezetimibe were formulated successfully. The addition of drug concentration gives higher drug loading and higher conc. of Alcl+3 yields small diameter beads and lower drug entrapment. Analysis of the release profiles showed that the data corresponds to zero order release and the diffusion-controlled mechanism as suggested by Higuchi concept.Conclusion: It can be concluded that beads produced by the sequential method had higher drug entrapment. Beads produced by simultaneous yields larger beads in diameter. The concept was cleared that drug release was dependent upon the quantity of polymer and increase in conc. of. aluminium chloride retarded the drug release in the sequential method. Prepared beads enhance the dissolution of ezetimibe and the oral bioavailability and also reduce the fluctuations in the oral bioavailability

THE ROLE OF NEEDLE IN FORMULATION OF pH SENSITIVE SWELLABLE MICROBEADS PREPARED WITH HYDROPHILIC POLYMERS FOR ATORVASTATIN AND THEIR CHARACTERIZATION STUDIES

Objective: The aim of the study was to develop and characterize mucoadhesive microbeads for oral sustained release of atorvastatin by using hydrophilic polymers and application of different process variables in designing of pH sensitive swellable microbeads.Methods: Microbeads were prepared by ionic gelation method. The compatibility studies of atorvastatin with polymers were investigated by differential scanning calorimeter and fourier transform infrared spectroscopy studies. In this work process variable like optimization of curing agents and their quantity, effect of rpm, and their influence in drug entrapment were studied. Prepared beads were characterized for particle size, swelling index, erosion studies and drug release studies.Results: Mixture of alginate and carbopol 934 P at 3.3 % w/v shows sustained release and good mucoadhesive capacity. Furthermore, drug loading and swelling increased with the use of a combination of polymers. On basis of in vitro release studies and swelling studies, it was observed that sodium alginate coated with carbopol 934 P showed sustained release of 84.5 % at end of 10 h in 6.8 phosphate buffer. The optimised batch followed peppas and higuchi release mechanism and releasing the drug by non-fickian transport.Conclusion: The alginate beads with a combination of carbopol 934P showed a sustain release pattern. The release rate and swelling of atorvastatin beads could be adjusted by adding other hydrophilic polymers or by optimising curing agents, curing time and their volume. The zero order of drug release was confirmed for all the batches. The in vitro data was better fit to Higuchi's diffusion model and diffusion rate limited

Experimental Evidence of Time Delay Induced Death in Coupled Limit Cycle Oscillators

Experimental observations of time delay induced amplitude death in a pair of coupled nonlinear electronic circuits that are individually capable of exhibiting limit cycle oscillations are described. In particular, the existence of multiply connected death islands in the parameter space of the coupling strength and the time delay parameter for coupled identical oscillators is established. The existence of such regions was predicted earlier on theoretical grounds in [Phys. Rev. Lett. 80, 5109 (1998); Physica 129D, 15 (1999)]. The experiments also reveal the occurrence of multiple frequency states, frequency suppression of oscillations with increased time delay and the onset of both in-phase and anti-phase collective oscillations.Comment: 4 aps formatted RevTeX pages; 6 figures; to appear in Phys. Rev. Let

Preparation of some 5,7-diarylcyclohexeno[3,4-d]-l-selena-2,3-diazolyl-6- spiro-5'-(2',3'-pyrazolidine / 2',3'-oxazolidine)-l ',4'-diones and 5,7-diarylcyclohexeno[3,4-d]-1-thia-2,3-diazolyl-6-spiro-5'(2',3'-pyrazolidine/2',3'-oxazolidine )-1',4'-diones

167-17

Effect of Nonlinear Thermal Radiation on MHD Chemically Reacting Maxwell Fluid Flow Past a Linearly Stretching Sheet

This communication addresses the influence of nonlinear thermal radiation on magneto hydrodynamic Maxwell fluid flow past a linearly stretching surface with heat and mass transfer. The effects of heat generation/absorption and chemical reaction are taken into account. At first, we converted the governing partial differential equations into nonlinear ordinary differential equations with the help of suitable similarity transformations and solved by using Runge-Kutta based shooting technique. Further, the effects of various physical parameters on velocity, temperature and concentration fields were discussed thoroughly with the help of graphs obtained by using bvp5c MATLAB package. In view of many engineering applications we also computed the friction factor, heat and mass transfer coefficients and presented them in tables. Results indicate that an increase in thermal buoyancy parameter enhances the fluid velocity but suppresses the temperature. Deborah number have tendency to reduce the fluid velocity and mass transfer rate. It is also perceived that temperature ratio parameter has the propensity to enrich the fluid temperature

DEVELOPMENT AND CHARACTERIZATION OF GASTRO RETENTIVE MUCOADHESIVE MICROBEADS CONTAINING SIMVASTATIN WITH DIFFERENT CROSS LINKING AGENTS

Objective: The aim of the present work was to prepare and examine drug release of the oral controlled release microbeads using different curing agents by emulsification internal ionic gelation technique. Methods: Cross-linked alginate microbeads were prepared with different cross linking agents by using mucoadhesive properties. The formation and compatibility of microbeads were confirmed by compatibility studies. Prepared microbeads evaluated for encapsulated efficiency, micromeritic properties, drug loading, in vitro wash off studies, in vitro dissolution studies, drug release kinetics and stability studies Results: The in vitro drug release was influenced by both type of curing agents and type of polymers and no significant changes in characterization parameters was observed after 3 mo stability studies. The sustained release profile of optimized batch was found to be 99.66±0.18% in comparison to pure drug profile of 28.64±0.02% at 12 h release study. Results of both wash-off and in vitro studies suggests that batch (SF2) prepared with aluminium chloride has shown better mucoadhesive property. Drug release of optimized batch follows zero order with non fickian mechanism according to Korsmeyer-Peppas equation. Conclusion: The data suggest the use of simvastatin mucoadhesive cross linked microbeads to offer the potential for oral controlled drug delivery with improved gastric retention and capable to provide sustained drug release by using cross linking agents

Hydrodynamic Processes and Inlet Dynamics of Chilka, A Tropical Lagoon on East Coast of India

Source: ICHE Conference Archive - https://mdi-de.baw.de/icheArchiv

Nanocrystalline Pb(Zr 0.52

Nanocrystalline powders of the composition Pb(Zr0.52Ti0.48)O3 were obtained by Mechanical alloying (high-energy ball milling). X-ray diffraction studies show that these compounds are completely into the perovskite phase. Detailed studies of electrical and mechanical properties of PZT as a function of temperature (and frequency) showed the high permittivity of 20653 at Curie transition temperature. Temperature variation of longitudinal modulus and internal friction of these ceramics at 104 kHz frequency were studied in the wide temperature range of 30∘C–420∘C. The internal friction measurements showed sharp stress induced relaxation peaks in the present composition corresponding to those temperatures where the minima were noticed in temperature variation of longitudinal modulus behavior. This dielectric and internal friction behaviour was explained in the light of polaron hopping mechanism and structural phase transitions in the present piezoelectric compositions