Loadcell supports for a dynamic force plate

An apparatus was developed to accurately measure components of force along three mutually perpendicular axes, torque, and the center of pressure imposed by the foot of a subject walking over its surface. The data obtained were used to supplement high-speed motion picture and electromyographic (EMG) data for in-depth studies of normal or abnormal human gait. Significant features of the design (in particular, the mechanisms used to support the loadcell transducers) are described. Results of the development program and typical data obtained with the device are presented and discussed

Effects of Teaching Resourcefulness and Acceptance on Affect, Behavior, and Cognition of Chronically Ill Elders

This clinical trial examined changes in affect, behavior, and cognition in 176 chronically ill elders who were randomly assigned to Resourcefulness Training (RT), Acceptance Training (AT), or Diversional Activities (DA). The RT group improved on affect (t(1,42) = 4.91; p \u3c .001) and cognition (t(1,42) = 2.03; p\u3c .05) and these effects lasted 12 weeks. The AT group improved on affect (t(1,36) = 3.08; p \u3c .01), but this improvement did not persist. The RT and AT groups both showed positive behavior changes after six weeks. There were no changes in the DA group. The findings suggest that teaching elders resourcefulness and acceptance of chronic conditions may promote healthy functioning and improve their quality of life

Pendulum Energy Harvester with Amplifier

This paper presents a new principle of inductive vibration power harvester. Harvester is a pendulum that uses energy capacitor which is the mass. The mass is connected to the pendulum via a gearbox to achieve greater movement of the pendulum that generates an electromagnetic voltage. The harvester is developed at a very low frequency (1-10 Hz) which uses the rectified magnetic fluxes. Magnets are statically placed in the harvester case, and relative motion is carried out by the coil. Magnets are static, and the coil moves due to the weight ratio of magnets which the steel leads of the magnetic flux and the coil itself. This paper is focused on a harvester with a mechanical amplifier with the proposed technique is brings the plow harvester access with an auxiliary force. The experimental results indicate that the optimal results of the harvester with an accumulator for the resonant zone are 3.75 Hz, 7 Hz, and 10 Hz

Discrete tomography and joint inversion for loosely connected or unconnected physical properties: application to crosshole seismic and georadar data sets

Tomographic inversions of geophysical data generally include an underdetermined component. To compensate for this shortcoming, assumptions or a priori knowledge need to be incorporated in the inversion process. A possible option for a broad class of problems is to restrict the range of values within which the unknown model parameters must lie. Typical examples of such problems include cavity detection or the delineation of isolated ore bodies in the subsurface. In cavity detection, the physical properties of the cavity can be narrowed down to those of air and/or water, and the physical properties of the host rock either are known to within a narrow band of values or can be established from simple experiments. Discrete tomography techniques allow such information to be included as constraints on the inversions. We have developed a discrete tomography method that is based on mixed-integer linear programming. An important feature of our method is the ability to invert jointly different types of data, for which the key physical properties are only loosely connected or unconnected. Joint inversions reduce the ambiguity in tomographic studies. The performance of our new algorithm is demonstrated on several synthetic data sets. In particular, we show how the complementary nature of seismic and georadar data can be exploited to locate air- or water-filled cavitie

An unfolding signifier: London's Baltic Exchange in Tallinn

In the summer of 2007 an unusual cargo arrived at Muuga and Paldiski harbors outside Tallinn. It consisted of nearly 50 containers holding over 1,000 tons of building material ranging from marble columns, staircases and fireplaces, to sculpted allegorical figures, wooden paneling and old-fashioned telephone booths. They were once part of the Baltic Exchange in the City of London. Soon they will become facets of the landscape of Tallinn. The following article charts this remarkable story and deploys this fragmented monument to analyze three issues relating to the Estonian capital: the relocation of the ‘Bronze Soldier’, the demolition of the Sakala Culture Center, and Tallinn’s future role as European Cultural Capital in 2011

Atomic-scale representation and statistical learning of tensorial properties

This chapter discusses the importance of incorporating three-dimensional symmetries in the context of statistical learning models geared towards the interpolation of the tensorial properties of atomic-scale structures. We focus on Gaussian process regression, and in particular on the construction of structural representations, and the associated kernel functions, that are endowed with the geometric covariance properties compatible with those of the learning targets. We summarize the general formulation of such a symmetry-adapted Gaussian process regression model, and how it can be implemented based on a scheme that generalizes the popular smooth overlap of atomic positions representation. We give examples of the performance of this framework when learning the polarizability and the ground-state electron density of a molecule

Assessment of Hearing Exposures and Personal Protective Equipment use in Agricultural Workers

Agriculture continues to rank as one of the most hazardous industries in the United States. This is in part due to the high number of hazardous exposures that farmers face, including respiratory and hearing exposures. The danger to workers can be reduced by properly wearing personal protective equipment (PPE). However, it has been shown that agricultural workers wear PPE at a low rate, in part due to inconvenience and poor accessibility of the equipment. There is little knowledge currently about how PPE are stored, maintained, and if they are used in a correct manner in specific exposure conditions by the operators. To gain a better understanding of PPE usage an on-farm exposure assessment conducted using a questionnaire. A survey conducted by CS-CASH added to this data by covering potential sources of noise exposures and frequency of PPE use. Finding that farmers do not always know what PPE s appropriate to wear and only wear PPE on 30% of the time. Many farmers noted that not readily available inconveniwere reasons frequen. oise exposures (tractor, combine, air seeder, chainsaw, compressor, grinder, and other) were significant hearing loss. Education of proper PPE use needs to increase among farmers and ranchers to emphasize the importance of PPE and damage if not worn. This will be done through educational outreach programs and continued surveillance programs

A Unique Population of Cave Bears (Carnivora: Ursidae) from the Middle Pleistocene of Kents Cavern, England, Based on Dental Morphometrics

The ‘breccia’ stratum from Kents (we follow local tradition in using the form ‘Kents’, without an apostrophe) Cavern, England, has been well known for its rich yield of cave-bear material since excavations began in the mid-19th century. Recent work has established that the bears are of latest MIS 12 or earliest MIS 11 age. A life table based on a collection of 67 molariform teeth is consistent with the use of the cave as a hibernaculum. Univariate and morphological assessment of the teeth shows an unusual range of primitive and more derived characters. Multivariate morphometric analysis of cave-bear teeth from the site demonstrates that these animals, while currently assignable to Ursus deningeri sensu lato, are nevertheless morphologically distinct and not simply late deningeri on a hypothetical chronospecific continuum

Focused Ion Beam Fabrication

Contains reports on five research projects.DARPA/Naval Electronic Systems Command (Contract MDA-903-85-C-0215)Charles Stark Draper Laboratory (Contract DL-H-261827)U.S. Navy - Office of Naval Research (Contract N00014-84-K-0073)Nippon Telephone and TelegraphHitachi Central Research Laborator

Focused Ion Beam Fabrication

Contains summary of research program and reports on four research projects.Charles Stark Draper Laboratory (Contract DL-H-225270)Hughes Research LaboratoriesInternational Business Machines, Inc. (Contract 456614)Nippon Telegraph and Telephone, Inc.U.S. Navy - Office of Naval Research (Contract N00014-84-K-0073)U.S. Department of Defense (Contract MDA903-85-C-0215)Hitachi Central Research Laborator