498 research outputs found

    Dynamic Control of Nanopore Wetting in Water and Saline Solutions under an Electric Field

    Get PDF
    Field-induced nanopore wetting by aqueous solutions, including electrolytes, provides opportunities for a variety of applications. Con!icting porosity requirements have so far precluded direct implementations of a two-way control: the pores have to be su ciently wide to allow water in#ltration at experimentally relevant voltages but should not exceed the kinetic threshold for spontaneous expulsion in the absence of the #eld. Applicable widths are restricted below a few nanometers. Only a narrow window of #elds and pore geometries can simultaneously satisfy both of the above requirements. Accurate accounts of wetting equilibria and dynamics at nanoscale porosity require molecular level descriptions. Here we use molecular dynamics simulations to study dynamic, #eld-controlled transitions between nanocon#ned liquid and vapor phases in contact with an unperturbed aqueous or electrolyte environment. In nanopores wetted by electrolyte solutions, we observe depletion of salt compared to the bulk phase. The application of a local electric #eld enhances the uptake of water and ions in the con#nement. In systems prone to capillary evaporation, the process can be reversed at su cient strength of the electric #eld. For alternating displacement #eld, we identify the conditions where O (ns) responses of the reversible in#ltration/ expulsion cycle can be secured for experimentally realizable #eld strengths, porosity, and salinity of the solution

    Electrolyte pore/solution partitioning by expanded grand canonical ensemble Monte Carlo simulation

    Get PDF
    Using a newly developed grand canonical Monte Carlo approach based on fractional exchanges of dissolved ions and water molecules, we studied equilibrium partitioning of both components between laterally extended apolar confinements and surrounding electrolyte solution. Accurate calculations of the Hamiltonian and tensorial pressure components at anisotropic conditions in the pore required the development of a novel algorithm for a self-consistent correction of nonelectrostatic cut-off effects. At pore widths above the kinetic threshold to capillary evaporation, the molality of the salt inside the confinement grows in parallel with that of the bulk phase, but presents a nonuniform width-dependence, being depleted at some and elevated at other separations. The presence of the salt enhances the layered structure in the slit and lengthens the range of inter-wall pressure exerted by the metastable liquid. Solvation pressure becomes increasingly repulsive with growing salt molality in the surrounding bath. Depending on the sign of the excess molality in the pore, the wetting free energy of pore walls is either increased or decreased by the presence of the salt. Because of simultaneous rise in the solution surface tension, which increases the free-energy cost of vapor nucleation, the rise in the apparent hydrophobicity of the walls has not been shown to enhance the volatility of the metastable liquidinthepores

    Reversible electrowetting transitions on superhydrophobic surfaces

    Get PDF
    Electric field applied across the interface has been shown to enable transitions from Cassie to Wenzel state on superhydrophobic surfaces with miniature corrugations. Molecular Dynamics (MD) simulations manifest the possibility of reversible cycling between the two states when narrow surface wells support spontaneous expulsion of water in the absence of the field. With approximately 1 nm sized wells between the surface asperities, response times to changes of electric field are of O(0.1) ns, allowing up to GHz frequency of the cycle. Because of orientation preferences of interfacial water in contact with the solid, the phenomenon depends on the polarity of the field normal to the interface. The threshold field strength for the Cassie-to-Wenzel transition is significantly lower for the field pointing from the aqueous phase to the surface, however, once in the Wenzel state, the opposite field direction secures tighter filling of the wells. Considerable hysteresis revealed by the delayed water retraction at decreasing field strength indicates the presence of moderate kinetic barriers to expulsion. Known to scale approximately with the square of the length scale of the corrugations, these barriers preclude the use of increased corrugation sizes while the reduction of the well diameter necessitates stronger electric fields. Field-controlled Cassie-to-Wenzel transitions are therefore optimized by using superhydrophobic surfaces with nanosized corrugations. Abrupt changes indicate a high degree of cooperativity reflecting the correlations between wetting states of interconnected wells on the textured surface

    Salt and Water Uptake in Nanocon!nement under Applied Electric Field: An Open Ensemble Monte Carlo Study

    Get PDF
    Permeation of electrolytes in nanoporous materials underlies many applications in energy and materials technologies. Wetting of apolar nanopores can be enhanced by electric !eld, attracting water and ions from unperturbed electrolyte bath. We study absorption of water and NaCl in the pores by Expanded Ensemble Grand Canonical Monte Carlo simulation, which implements particle insertions and deletions through incremental changes in particles’ coupling with the system. We determine the uptake of water and ions in the pores, and concomitant changes in pore thermodynamics, as functions of !eld strength in the pore and salinity in the external bath. Pressure increase and reduction of wetting free energy, !, in the pore intensify near-quadratically with the !eld. Surprisingly, the in uence of bulk salinity on ! can change qualitatively with pore width and !eld strength. Conforming to Gibbs adsorption isotherm, narrow pores with salt molality below that of the bath experience an increase in ! with rising bulk salinity. The !eld can change salt depletion to excess and consequently reverse the salinity dependence of wetting free energy from increasing to declining function of bulk molality. Field polarity continues to play a role, leading to asymmetric wettability at opposing walls as we previously observed in the absence of ions

    Microscopic Dynamics of the Orientation of a Hydrated Nanoparticle in an Electric Field

    Get PDF
    We use atomistic simulations to study the orientational dynamics of a nonpolar nanoparticle suspended in water and subject to an electric field. Due to molecular-level effects we describe, the torque exerted on the nanoparticle exceeds continuum-electrostatics based estimates by about a factor of two. The reorientation time of a 16.2×16.2×3.35 ̊A3 nanoparticle in a field E \u3e 0.015V/ ̊A is an order of magnitude less than the field-free orientational time (∼ 1 ns). Surprisingly, the alignment speed is nearly independent of the nanoparticle size in this regime. These findings are relevant for design of novel nanostructures and sensors and development of nanoengineering methods

    Wetting transparency of graphene in water

    Get PDF
    Measurements of contact angle on graphene sheets show a notable dependence on the nature of the underlying substrate, a phenomenon termed wetting transparency. Our molecular modeling studies reveal analogous transparency in case of submerged graphene fragments in water. A combined effect of attractive dispersion forces, angle correlations between aqueous dipoles, and repulsion due to the hydrogen-bond-induced orientation bias in polarized hydration layers acting across graphene sheet, enhances apparent adhesion of water to graphene. We show wetting free energy of a fully wetted graphene platelet to be about 8 mNm−1 lower than for graphene wetted only on one side, which gives close to 10◦ reduction in contact angle. This difference has potential implications for predictions of water absorption vs. desorption, phase behavior of water in aqueous nanoconfinements, solvent- induced interactions among graphitic nanoparticle and concomitant stability in aqueous dispersions, and can influence permeability of porous materials such as carbon nanotubes by water and aqueous solutions

    Molecular Polarizability in Open Ensemble Simulations of Aqueous Nanoconfinements under Electric Field

    Get PDF
    Molecular polarization at aqueous interfaces involves fast degrees of freedom that are often averaged-out in atomistic-modeling approaches. The resulting effective interactions depend on a specific environment, making explicit account of molecular polarizability particularly important in solutions with pronounced anisotropic perturbations, including solid/liquid interfaces and external fields. Our work concerns polarizability effects in nanoscale confinements under electric field, open to an unperturbed bulk environment. We model aqueous molecules and ions in hydrophobic pores using the Gaussian-charge-on-spring BK3-AH representation. This involves nontrivial methodology devel- opments in expanded ensemble Monte Carlo simulations for open systems with long-ranged multibody interactions and necessitates further improvements for efficient modeling of polarizable ions. Structural differences between fixed-charge and polarizable models were captured in molecular dynamics simulations for a set of closed systems. Our open ensemble results with the BK3 model in neat-aqueous systems capture the ∼10% reduction of molecular dipoles within the surface layer near the hydrophobic pore walls in analogy to reported quantum mechanical calculations at water/vapor interfaces. The polarizability affects the interfacial dielectric behavior and weakens the electric-field dependence of water absorption at pragmatically relevant porosities. We observe moderate changes in thermodynamic properties and atom and charged-site spatial distributions; the Gaussian distribution of mobile charges on water and ions in the polarizable model shifts the density amplitudes and blurs the charge-layering effects associated with increased ion absorption. The use of polarizable force field indicates an enhanced response of interfacial ion distributions to applied electric field, a feature potentially important for in silico modeling of electric double layer capacitors

    Dynamics at a Janus interface

    Get PDF
    Electric field effects on water interfacial properties abound, ranging from electrochemical cells to nanofluidic devices to membrane ion channels. On the nanoscale, spontaneous orientational polarization of water couples with field alignment, resulting in an asymmetric wetting behavior of opposing surfacesa field-induced analogue of a chemically generated Janus interface. Using atomistic simulations, we uncover a new and significant field polarity (sign) dependence of the dipolar- orientation polarization dynamics in the hydration layer. Applying electric fields across a nanoparticle, or a nanopore, can lead to close to 2 orders of magnitude difference in response times of water polarization at opposite surfaces. Typical time scales are within the O(10−1) to O(10) picosecond regime. Temporal response to the field change also reveals strong coupling between local polarization and interfacial density relaxations, leading to a nonexponential and in some cases, nonmonotonic response. This work highlights the surprisingly strong asymmetry between reorientational dynamics at surfaces with incoming and outgoing fields, which is even more pronounced than the asymmetry in static properties of a field-induced Janus interface

    Electrowetting at the nanoscale

    Get PDF
    Using molecular simulations of nano-sized aqueous droplets on a model graphite surface we demonstrate remarkable sensitivity of water contact angles to the applied electric field polarity and direction relative to the liquid/solid interface. The effect is explained by analyzing the influence of the field on interfacial hydrogen bonding in the nanodrop, which in turn affects the interfacial tensions. The observed anisotropy in droplet wetting is a new nanoscale phenomenon that has so far been elusive as, in current experimental setups, surface molecules represent a very low fraction of the total number affected by the field. Our findings may have important implications for the design of electrowetting techniques in fabrication and property tuning of nanomaterials

    Anisotropic Structure and Dynamics of Water under Static Electric Fields

    Get PDF
    We study the structure and dynamics of water subject to a range of static external electric fields, using molecular dynamics simulations. In particular, we monitor the changes in hydrogen bond kinetics, reorientation dynamics, and translational motions of water molecules. We find that water molecules translate and rotate slower in elec- tric fields, because the tendency to reinstate the aligned orientation reduces the prob- ability of finding a new hydrogen bond partner and hence increases the probability of reforming already ruptured bonds. Furthermore, dipolar alignment of water mole- cules with the field results in structural and dynamic anisotropies even though the angularly averaged metrics indicate only minor structural changes. Through compar- ison of selected nonpolarizable and polarizable water models, we find that the electric field effects are stronger in polarizable water models, where field-enhanced dipole moments and thus more stable hydrogen bonds lead to slower switching of hydrogen bond partners and reduced translational mobility, compared to a nonpolarizable water model
    • …
    corecore