43 research outputs found
Coherent 100G Nonlinear Compensation with Single-Step Digital Backpropagation
Enhanced-SSFM digital backpropagation (DBP) is experimentally demonstrated
and compared to conventional DBP. A 112 Gb/s PM-QPSK signal is transmitted over
a 3200 km dispersion-unmanaged link. The intradyne coherent receiver includes
single-step digital backpropagation based on the enhanced-SSFM algorithm. In
comparison, conventional DBP requires twenty steps to achieve the same
performance. An analysis of the computational complexity and structure of the
two algorithms reveals that the overall complexity and power consumption of DBP
are reduced by a factor of 16 with respect to a conventional implementation,
while the computation time is reduced by a factor of 20. As a result, the
proposed algorithm enables a practical and effective implementation of DBP in
real-time optical receivers, with only a moderate increase of the computational
complexity, power consumption, and latency with respect to a simple
feed-forward equalizer for dispersion compensation.Comment: This work has been presented at Optical Networks Design & Modeling
(ONDM) 2015, Pisa, Italy, May 11-14, 201
Optical Time-Frequency Packing: Principles, Design, Implementation, and Experimental Demonstration
Time-frequency packing (TFP) transmission provides the highest achievable
spectral efficiency with a constrained symbol alphabet and detector complexity.
In this work, the application of the TFP technique to fiber-optic systems is
investigated and experimentally demonstrated. The main theoretical aspects,
design guidelines, and implementation issues are discussed, focusing on those
aspects which are peculiar to TFP systems. In particular, adaptive compensation
of propagation impairments, matched filtering, and maximum a posteriori
probability detection are obtained by a combination of a butterfly equalizer
and four 8-state parallel Bahl-Cocke-Jelinek-Raviv (BCJR) detectors. A novel
algorithm that ensures adaptive equalization, channel estimation, and a proper
distribution of tasks between the equalizer and BCJR detectors is proposed. A
set of irregular low-density parity-check codes with different rates is
designed to operate at low error rates and approach the spectral efficiency
limit achievable by TFP at different signal-to-noise ratios. An experimental
demonstration of the designed system is finally provided with five
dual-polarization QPSK-modulated optical carriers, densely packed in a 100 GHz
bandwidth, employing a recirculating loop to test the performance of the system
at different transmission distances.Comment: This paper has been accepted for publication in the IEEE/OSA Journal
of Lightwave Technolog
All-Optical NRZ-DPSK to RZ-OOK Format Conversion Using Optical Delay Line Interferometer and Semiconductor Optical Amplifier
We describe an all-optical NRZ-DPSK to RZ-OOK converter employing an optical delay line interferometer and a semiconductor optical amplifier. System penalty at 10Gbit/s is experimentally demonstrated to be less than 1dB at BER of 10{ extminus}9
SOA Model and Design Guidelines in Lossless Photonic Subsystem
We propose a new practical analytical model to calculate the performance of amplitude-modulated systems, including semiconductor optical amplifiers (SOA). Lower and upper-performance bounds are given in terms of signal quality factor (Q) concerning the input signal pattern. The target is to provide a design tool for gain elements included in photonic integrated circuits (PIC) to compensate for their insertion loss. This subject is a critical issue, for example, in the arrays of optical transmitters with silicon photonics modulators used for interconnection applications. Due to implementation limitations, the design of an SOA embedded in a PIC is considerably different with respect to the use of SOAs as line amplifiers in optical networks. SOA amplified spontaneous emission (ASE) and gain saturation effects have been included in the model, together with the input signal extinction ratio and the receiver electrical filter. Each degradation effect provides its own contribution to the signal integrity in terms of signal-to-noise ratio (SNR) or inter-symbol interference (ISI). The model shows that the SOA operation at low extinction ratios, typical in optical interconnect applications, is substantially different from the operation at higher extinction ratios used in transport networks. The model is validated through numerical simulations and experiments. Finally, two examples are provided for dimensioning a PIC system and optimizing the SOA parameters
Blind Adaptive Chromatic Dispersion Compensation and Estimation for DSP-Based Coherent Optical Systems
We propose an accurate and low-complexity blind adaptive algorithm for chromatic dispersion (CD) compensation and estimation in coherent optical systems. The method is based on a Frequency Domain Equalizer (FDE), a low complexity Time Domain Equalizer arranged in a butterfly structure (B-TDE) and an Optical Performance Monitoring (OPM) block in a loop configuration. The loop is such that, at each iteration, the CD value compensated by the B-TDE and estimated by the OPM is given to the FDE; according to this estimation, in the subsequent iteration, the FDE compensates also this quantity. The procedure is repeated until the majority of CD is compensated by the FDE and a small residual quantity is compensated by a low complexity B-TDE with a small number of taps. The method is extended to long haul uncompensated links exploiting the information on the mean square error (MSE) provided by the B-TDE. The proposed algorithm is then experimentally validated for a polarization multiplexed quadrature phase shift keying (PM-QPSK) signal at 112 Gbit/s propagating along 1000 km of uncompensated Z PLUS® optical fiber. A statistical analysis of the performance of the proposed solution, in terms of mean value and standard deviation of the CD estimation error, is carried out, running a set of simulations including different impairments, such as noise, polarization dependent loss, polarization mode dispersion and self-phase modulation in a line of 1000 km of uncompensated G.652 optical fiber. Our method could be used to compensate and estimate any CD quantity without increasing the number of taps in the B-TDE and exploiting devices already included in the system (TDE, FDE and OPM) arranged in a loop
<研究>一般均衡理論の統一的理解に就て
Nonlinearity mitigation based on the enhanced split-step Fourier method (ESSFM) for the implementation of low-complexity digital backpropagation (DBP) is investigated and experimentally demonstrated. After reviewing the main computational aspects of DBP and of the conventional split-step Fourier method (SSFM), the ESSFM for dual-polarization signals is introduced. Computational complexity, latency, and power consumption of DBP based on the SSFM and ESSFM algorithms are estimated and compared. Effective low-complexity nonlinearity mitigation in a 112 Gb/s polarization-multiplexed QPSK system is experimentally demonstrated by using a single-step DBP based on the ESSFM. The proposed DBP implementation requires only a single step of the ESSFM algorithm to achieve a transmission distance of 3200km over a dispersion-unmanaged link. In comparison, a conventional DBP implementation requires 20 steps of the SSFM algorithm to achieve the same performance. An analysis of the computational complexity and structure of the two algorithms reveals that the overall complexity and power consumption of DBP are reduced by a factor of 16 with respect to a conventional implementation, while the computation time is reduced by a factor of 20. Similar complexity reductions can be obtained at longer distances if higher error probabilities are acceptable. The results indicate that the proposed algorithm enables a practical and effective implementation of DBP in real-time optical receivers, with only a moderate increase in the computational complexity, power consumption, and latency with respect to a simple feed-forward equalizer for bulk dispersion compensation
Identification of Sclerostin as a Putative New Myokine Involved in the Muscle-to-Bone Crosstalk
Bone and muscle have been recognized as endocrine organs since they produce and
secrete “hormone-like factors” that can mutually influence each other and other tissues, giving rise
to a “bone–muscle crosstalk”. In our study, we made use of myogenic (C2C12 cells) and osteogenic
(2T3 cells) cell lines to investigate the effects of muscle cell-produced factors on the maturation
process of osteoblasts. We found that the myogenic medium has inhibitory effects on bone cell
differentiation and we identified sclerostin as one of the myokines produced by muscle cells.
Sclerostin is a secreted glycoprotein reportedly expressed by bone/cartilage cells and is considered
a negative regulator of bone growth due to its role as an antagonist of the Wnt/β-catenin pathway.
Given the inhibitory role of sclerostin in bone, we analyzed its expression by muscle cells and how
it affects bone formation and homeostasis. Firstly, we characterized and quantified sclerostin
synthesis by a myoblast cell line (C2C12) and by murine primary muscle cells by Western blotting,
real-time PCR, immunofluorescence, and ELISA assay. Next, we investigated in vivo production of
sclerostin in distinct muscle groups with different metabolic and mechanical loading characteristics.
This analysis was done in mice of different ages (6 weeks, 5 and 18 months after birth) and revealed
that sclerostin expression is dynamically modulated in a muscle-specific way during the lifespan.
Finally, we transiently expressed sclerostin in the hind limb muscles of young mice (2 weeks of age)
via in vivo electro-transfer of a plasmid containing the SOST gene in order to investigate the effects
of muscle-specific overproduction of the protein. Our data disclosed an inhibitory role of the
muscular sclerostin on the bones adjacent to the electroporated muscles. This observation suggests
that sclerostin released by skeletal muscle might synergistically interact with osseous sclerostin and
potentiate negative regulation of osteogenesis possibly by acting in a paracrine/local fashion. Our
data point out a role for muscle as a new source of sclerostin.Bone and muscle have been recognized as endocrine organs since they produce and secrete “hormone-like factors” that can mutually influence each other and other tissues, giving rise to a “bone–muscle crosstalk”. In our study, we made use of myogenic (C2C12 cells) and osteogenic (2T3 cells) cell lines to investigate the effects of muscle cell-produced factors on the maturation process of osteoblasts. We found that the myogenic medium has inhibitory effects on bone cell differentiation and we identified sclerostin as one of the myokines produced by muscle cells. Sclerostin is a secreted glycoprotein reportedly expressed by bone/cartilage cells and is considered a negative regulator of bone growth due to its role as an antagonist of the Wnt/β-catenin pathway. Given the inhibitory role of sclerostin in bone, we analyzed its expression by muscle cells and how it affects bone formation and homeostasis. Firstly, we characterized and quantified sclerostin synthesis by a myoblast cell line (C2C12) and by murine primary muscle cells by Western blotting, real-time PCR, immunofluorescence, and ELISA assay. Next, we investigated in vivo production of sclerostin in distinct muscle groups with different metabolic and mechanical loading characteristics. This analysis was done in mice of different ages (6 weeks, 5 and 18 months after birth) and revealed that sclerostin expression is dynamically modulated in a muscle-specific way during the lifespan. Finally, we transiently expressed sclerostin in the hind limb muscles of young mice (2 weeks of age) via in vivo electro-transfer of a plasmid containing the SOST gene in order to investigate the effects of muscle-specific overproduction of the protein. Our data disclosed an inhibitory role of the muscular sclerostin on the bones adjacent to the electroporated muscles. This observation suggests that sclerostin released by skeletal muscle might synergistically interact with osseous sclerostin and potentiate negative regulation of osteogenesis possibly by acting in a paracrine/local fashion. Our data point out a role for muscle as a new source of sclerostin
Rate Loss Reduction through Look-up Table Design for Hierarchical Distribution Matcher in Probabilistic Amplitude Shaped systems
We proposed a new method for the rate loss reduction in the hierarchical distribution matching (Hi-DM) approach for the constellation shaping. This method makes Hi-DM comparable with the enumerative sphere shaping (ESS) approach, at short block length, in terms of rate loss