Note on the paper of Fu and Wong on strictly pseudoconvex domains with K\"ahler--Einstein Bergman metrics

It is shown that the Ramadanov conjecture implies the Cheng conjecture. In particular it follows that the Cheng conjecture holds in dimension two

Insensitivity of the present hsp26 chromatin structure to a TATA box mutation in Drosophila

The role of the TATA element in establishing the chromatin structure and inducible transcription of the Drosophila melanogaster hsp26 gene has been analyzed. An hsp26/lacZ fusion gene with a mutant promoter, in which the TATA box sequence TATAAA was changed to CCCAAA, was introduced into Drosophila by P-element transformation. The mutation had little effect on formation of the preset chromatin structure observed prior to induction. However, the mutation dramatically reduced transcription levels following heat shock. Northern analysis indicated that weak, inducible expression of the mutant promoter occurred within the same period of heat shock as for the normal promoter, suggesting that TFIID was associated with the mutant promoter prior to heat shock. Biochemical analysis showed that the mutant promoter still bound TFIID in vitro, but with 3-5-fold less affinity than the normal promoter. DNase I footprinting revealed that the conformation of the TFIID-DNA complex differed significantly from that of the normal promoter. These results indicate that alterations in the conformation or the stability of the TFIID-DNA complex drastically reduce the level of induction, but do not dramatically affect chromatin structure formation. Formation of the requisite chromatin structure is either independent of, or highly tolerant of, changes in the TFIID-DNA complex

Study of heterogeneous nucleation of eutectic Si in high-purity Al-Si alloys with Sr addition

The official published version can be accessed from the link below - Copyright @ 2010 The Minerals, Metals & Materials Society and ASM InternationalAl-5 wt pct Si master-alloys with controlled Sr and/or P addition/s were produced using super purity Al 99.99 wt pct and Si 99.999 wt pct materials in an arc melter. The master-alloy was melt-spun resulting in the production of thin ribbons. The Al matrix of the ribbons contained entrained Al-Si eutectic droplets that were subsequently investigated. Differential scanning calorimetry, thermodynamic calculations, and transmission electron microscopy techniques were employed to examine the effect of the Sr and P additions on eutectic undercoolings and nucleation phenomenon. Results indicate that, unlike P, Sr does not promote nucleation. Increasing Sr additions depressed the eutectic nucleation temperature. This may be a result of the formation of a Sr phase that could consume or detrimentally affect potent AlP nucleation sites.This work is financially supported by the Higher Education Commission of Pakistan and managerially supported from the OAD

Promoter sequence containing (CT)n.(GA)n repeats is critical for the formation of the DNase I hypersensitive sites in the Drosophila hsp26 gene

We have analyzed P-element-transformed lines carrying hsp26/lacZ transgenes with various deletions and substitutions within the Drosophila melanogaster hsp26 promoter region in order to identify the sequences required for the formation of the DNase I hypersensitive sites (DH sites). DH sites are generally found associated with promoters and enhancer elements of active and inducible eukaryotic genes, and are thought to be nucleosome-free regions of DNA that interact with regulatory proteins and the transcriptional machinery. There are two major DH sites located within the promoter region of the hsp26 gene, centered at -50 and at -350 (relative to the hsp26 transcription start site). The sequences from -135 to -85, which contain (CT)n.(GA)n repeats, contribute significantly to the formation of the DH sites in the hsp26 promoter region. Deletion or substitution of this (CT)n region drastically reduces the accessibility of the DNA at these sites to DNase I. This reduction in accessibility was quantified by measuring the susceptibility of the DNA within nuclei to cleavage at a restriction site within the DH site. In addition to the (CT)n region and the promoter at -85 to +11 (region P), one of two other regions must be present for effective creation of the DH sites: sequences between -351 and -135 (region A), or sequences between +11 and +632 (region D). Disruption of the wild-type chromatin structure, as assayed by the loss of accessibility to the DH sites, is correlated with a decrease in inducible transcriptional activity, even when the TATA box and heat shock regulatory elements are present in their normal positions

Phantom-based study exploring the effects of different scatter correction approaches on the reconstructed images generated by contrast-enhanced stationary digital breast tomosynthesis

Stationary digital breast tomosynthesis (sDBT) is an emerging technology in which the single rotating x-ray tube is replaced by a fixed array of multiple carbon nanotube-enabled sources, providing a higher spatial and temporal resolution. As such, sDBT offers a promising platform for contrast-enhanced (CE) imaging. However, given the minimal enhancement above background with standard operational tube settings and iodine dosing, CE breast imaging requires additional acquisition steps to isolate the iodine signal, using either temporal or dual energy subtraction (TS or DES) protocols. Also, correcting for factors that limit contrast is critical, and scatter and noise pose unique challenges during tomosynthesis. This phantom-based study of CE sDBT compared different postacquisition scatter correction approaches on the quality of the reconstructed image slices. Beam-pass collimation was used to sample scatter indirectly, from which an interpolated scatter map was obtained for each projection image. Scatter-corrected projections provided the information for reconstruction. Comparison between the application of different scatter maps demonstrated the significant effect that processing has on the contrast-to-noise ratio and feature detectability (d′) in the final displayed images and emphasized the critical importance of scatter correction during DES

Feasibility of a prototype carbon nanotube enabled stationary digital chest tomosynthesis system for identification of pulmonary nodules by pulmonologists

Background: Screen detected and incidental pulmonary nodules are increasingly common. Current guidelines recommend tissue sampling of solid nodules >8 mm. Bronchoscopic biopsy poses the lowest risk but is paired with the lowest diagnostic yield when compared to CT-guided biopsy or surgery. A need exists for a safe, mobile, low radiation dose, intra-procedural method to localize biopsy instruments within target nodules. This retrospective cross sectional reader feasibility study evaluates the ability of clinicians to identify pulmonary nodules using a prototype carbon nanotube radiation enabled stationary digital chest tomosynthesis system. Methods: Patients with pulmonary nodules on prior CT imaging were recruited and consented for imaging with stationary digital chest tomosynthesis. Five pulmonologists of varying training levels participated as readers. Following review of patient CT and a thoracic radiologist’s interpretation of nodule size and location the readers were tasked with interpreting the corresponding tomosynthesis scan to identify the same nodule found on CT. Results: Fifty-five patients were scanned with stationary digital chest tomosynthesis. The median nodule size was 6 mm (IQR =4–13 mm). Twenty nodules (37%) were greater than 8 mm. The radiation entrance dose for s-DCT was 0.6 mGy. A significant difference in identification of nodules using s-DCT was seen for nodules <8 vs. ≥8 mm in size (57.7% vs. 90.9%, CI: −0.375, −0.024; P<0.001). Inter-reader agreement was fair, and better for nodules ≥8 mm [0.278 (SE =0.043)]. Conclusions: With system and carbon nanotube array optimization, we hypothesize the detection rate for nodules will improve. Additional study is needed to evaluate its use in target and tool co-localization and target biopsy

Interplay of quantum magnetic and potential scattering around Zn or Ni impurity ions in superconducting cuprates

To describe the scattering of superconducting quasiparticles from non-magnetic (Zn) or magnetic (Ni) impurities in optimally doped high T$_c$ cuprates, we propose an effective Anderson model Hamiltonian of a localized electron hybridizing with $d_{x^2-y^2}$-wave BCS type superconducting quasiparticles with an attractive scalar potential at the impurity site. Due to the strong local antiferromagnetic couplings between the original Cu ions and their nearest neighbors, the localized electron in the Ni-doped materials is assumed to be on the impurity sites, while in the Zn-doped materials the localized electron is distributed over the four nearest neighbor sites of the impurities with a dominant $d_{x^2-y^2}$ symmetric form of the wave function. With Ni impurities, two resonant states are formed above the Fermi level in the local density of states at the impurity site, while for Zn impurities a sharp resonant peak below the Fermi level dominates in the local density of states at the Zn site, accompanied by a small and broad resonant state above the Fermi level mainly induced by the potential scattering. In both cases, there are no Kondo screening effects. The local density of states and their spatial distribution at the dominant resonant energy around the substituted impurities are calculated for both cases, and they are in good agreement with the experimental results of scanning tunneling microscopy in Bi$_2$Sr$_2$CaCu$_2$O$_{8+\delta}$ with Zn or Ni impurities, respectively.Comment: 24 pages, Revtex, 8 figures, submitted to Physical Review B for publication. Sub-ject Class: Superconductivity; Strongly Correlated Electron

Estimating scatter from sparsely measured primary signal

Scatter radiation severely degrades the image quality. Measurement-based scatter correction methods sample the scatter signal at sparsely distributed points, from which the scatter profile is estimated and deterministically removed from the projection image. The estimation of the scatter profile is generally done through a spline interpolation and the resulting scatter profile is quite smooth. Consequently, the noise is intact and the signal-to-noise ratio is reduced in the projection image after scatter correction, leading to image artifacts and increased noise in the reconstruction images. We propose a simple and effective method, referred to as filtered scatter-to-primary ratio (f -SPR) estimation, to estimate the scatter profile using the sparsely sampled scatter signal. Using the primary sampling device and the stationary digital tomosynthesis systems previously developed in our lab, we evaluated and compared the f-SPR method in comparison with existing methods in terms of contrast ratio, signal difference-to-noise ratio, and modulation transfer function. A significant improvement in image quality is observed in both the projection and the reconstruction images using the proposed method

Point-of-Care Tomosynthesis Imaging of the Wrist

Introduction: Musculoskeletal injury to extremities is a common issue for both stateside and deployed military personnel, as well as the general public. Superposition of anatomy can make diagnosis difficult using standard clinical techniques. There is a need for increased diagnostic accuracy at the point-of-care for military personnel in both training and operational environments, as well as assessment during follow-up treatment to optimize care and expedite return to service. Orthopedic tomosynthesis is rapidly emerging as an alternative to digital radiography (DR), exhibiting an increase in sensitivity for some clinical tasks, including diagnosis and follow-up of fracture and arthritis. Commercially available digital tomosynthesis systems are large complex devices. A compact device for extremity tomosynthesis (TomoE) was previously demonstrated using carbon nanotube X-ray source array technology. The purpose of this study was to prepare and evaluate the prototype device for an Institutional Review Board-approved patient wrist imaging study and provide initial patient imaging results. Materials and Methods: A benchtop device was constructed using a carbon nanotube X-ray source array and a flat panel digital detector. Twenty-one X-ray projection images of cadaveric specimens and human subjects were acquired at incident angles from -20 to +20 degrees in various clinical orientations, with entrance dose calibrated to commercial digital tomosynthesis wrist scans. The projection images were processed with an iterative reconstruction algorithm in 1 mm slices. Reconstruction slice images were evaluated by a radiologist for feature conspicuity and diagnostic accuracy. Results: The TomoE image quality was found to provide more diagnostic information than DR, with reconstruction slices exhibiting delineation of joint space, visual conspicuity of trabecular bone, bone erosions, fractures, and clear depiction of normal anatomical features. The scan time was 15 seconds and the skin entrance dose was verified to be 0.2 mGy. Conclusions: The TomoE device image quality has been evaluated using cadaveric specimens. Dose was calibrated for a patient imaging study. Initial patient images depict a high level of anatomical detail and an increase in diagnostic value compared to DR