191 research outputs found

    Plasmonic Paper as a Novel Chem/Bio Detection Platform

    Get PDF
    The time varying electric field of electromagnetic (EM) radiation causes oscillation of conduction electrons of metal nanoparticles. The resonance of such oscillation, termed localized surface plasmon resonance (LSPR), falls into the visible spectral region for noble metals such as gold, silver and copper. LSPR of metal nanostructures is sensitive to numerous factors such as composition, size, shape, dielectric properties of surrounding medium, and proximity to other nanostructures (plasmon coupling). The sensitivity of LSPR to the refractive index of surrounding medium renders it an attractive platform for chemical and biological sensing. When the excitation light is in resonance with the plasmon frequency of the metal nanoparticle, it radiates a characteristic dipolar radiation causing a characteristic spatial distribution in which certain areas show higher EM field intensity, which is manifested as electromagnetic field enhancement. Surface enhanced Raman scattering (SERS) involves dramatic enhancement of the intensity of the Raman scattering from the analyte adsorbed on or in proximity to a nanostructured metal surface exhibiting such strong EM field enhancement. Both LSPR and SERS have been widely investigated for highly sensitive and label-free chemical & biological sensors. Most of the SERS/LSPR sensors demonstrated so far rely on rigid planar substrates (e.g., glass, silicon) owing to the well-established lithographic approaches, which are routinely employed for either fabrication or assembly of plasmonic nanotransducers. In many cases, their rigid nature results in low conformal contact with the sample and hence poor sample collection efficiency. We hypothesized that paper substrates are an excellent alternative to conventional rigid substrates to significantly improve the (multi-)functionality of LSPR/SERS substrates, dramatically simplify the fabrication procedures and lower the cost. The choice of paper substrates for the implementation of SERS/LSPR sensors is rationalized by numerous advantages such as (i) high specific surface area resulting in large dynamic range (ii) excellent wicking properties for rapid uptake and transport of analytes to test domains (iii) compatibility with conventional printing approaches, enabling multi-analyte plasmonic sensors (iv) significant reduction in cost (v) smaller sample volume requirement (vi) easy disposability. In this work, we have introduced novel SERS and LSPR substrates based on conventional filter paper decorated with plasmonic nanostructures, called plasmonic paper. A flexible SERS substrate based on common filter paper adsorbed with gold nanostructures allows conformal contact with real-world surfaces, enabling rapid trace detection. To realize multifunctional SERS substrates, paper substrates were cut into star-shaped structures and the fingers were differentially functionalized with polyelectrolytes that allows separation and pre-concentration of different components of a complex sample in a small surface area by taking advantage of the properties of cellulose paper and shape-enhanced capillary effect. Plasmonic paper can also serve as a novel LSPR biosensing platform by decorating the paper substrate with biofunctionalized nanostructures. Furthermore, calligraphy approach was employed to create well-isolated test domains on paper substrates using functionalized plasmonic nanostructures as ink for multiplexed chemical sensing and label-free biosensing. These plasmonic paper substrates exhibit excellent sample collection efficiency and do not require complex fabrication processes. This class of substrates is expected to have applications not only to first responders and military personal but also to several areas of medical, food analysis, and environmental research

    The Boundary Value Problem of the Equations with Nonnegative Characteristic Form

    Full text link
    We study the generalized Keldys-Fichera boundary value problem for a class of higher order equations with nonnegative characteristic. By using the acute angle principle and the Hölder inequalities and Young inequalities we discuss the existence of the weak solution. Then by using the inverse Hölder inequalities, we obtain the regularity of the weak solution in the anisotropic Sobolev space

    Effect of Phellodendron chinense Schneid Extract on Chronic Bacterial Prostatitis Induced by Chlamydia in Rats

    Get PDF
    Purpose: To explore the effects of Phellodendron chinense Schneid (PCS) extract on chlamydiainduced chronic bacterial prostatitis (CBP).Methods: Sixty 8-week-old male Sprague-Dawley rats were used in this study. Prostate index (PI) and prostate specific antigen (PSA) were determined after 4 weeks of oral administration of PCS extract (80, 160 or 320 mg/kg) or tetracycline (80 mg/kg) and compared to PI and PSA in untreated rats with CBP and healthy control rats (n = 10). Chronic inflammatory cell infiltrates, acinar changes, and interstitial fibrosis were evaluated by histopathological examination. In addition, pertinent inflammatory factors, including tumor necrosis factor-ι (TNF-ι), interleukin-1β (IL-1β), cyclooxygenase-2 (COX-2), prostaglandin E2 (PEG2), transforming growth factor β1 (TGF-β1), and connective tissue growth factor (CTGF), were measured in prostate tissues using ELISA kits.Results: High doses of PCS (160 and 320 mg/kg) significantly decreased PI and PSA relative to model group (p < 0.01). PCS treatment also significantly reduced chronic inflammatory cell infiltrates and interstitial fibrosis in prostate tissue of CBP rats. In addition, TNF-ι, IL-1β, COX-2, PEG2, TGF-β1, and CTGF decreased in PCS-treated rats compared to untreated control (p < 0.01).Conclusion: PCS extract has significant anti-inflammatory effects on chlamydia-induced CBP.Keywords: Phellodendron chinense Schneid, Bacterial prostatitis, Inflammatory factors, Morphometric analysis, Interstitial fibrosis, Prostate specific antigen, Prostate inde

    Adaptive Excitation Control for the Underactuated Biped Robot

    Get PDF
    AbstractA control method to make the chaotic gait converge to a stable cycle gait is proposed for the biped robot with knees. This control method is called adaptive excitation control. It is based on the principle of bionics and the principle of self-excited. The control law is a combination of sinusoidal input and sensory feedback control. The control torque is only inputted into the robot's hip. Therefore, the walking process is low energy consuming. Simulation results show that the control method proposed in this paper is effective. It can enlarge the basin of attraction of limit cycle and increase the gait stability

    Self-absorption in the solar transition region

    Full text link
    Transient brightenings in the transition region of the Sun have been studied for decades and are usually related to magnetic reconnection. Recently, absorption features due to chromospheric lines have been identified in transition region emission lines raising the question of the thermal stratification during such reconnection events. We analyse data from the Interface Region Imaging Spectrograph (IRIS) in an emerging active region. Here the spectral profiles show clear self-absorption features in the transition region lines of Si\,{\sc{iv}}. While some indications existed that opacity effects might play some role in strong transition region lines, self-absorption has not been observed before. We show why previous instruments could not observe such self-absorption features, and discuss some implications of this observation for the corresponding structure of reconnection events in the atmosphere. Based on this we speculate that a range of phenomena, such as explosive events, blinkers or Ellerman bombs, are just different aspects of the same reconnection event occurring at different heights in the atmosphere.Comment: Accepted for publication in Ap

    Effects and Mechanisms of Surface Topography on the Antiwear Properties of Molluscan Shells ( Scapharca subcrenata

    Get PDF
    The surface topography (surface morphology and structure) of the left Scapharca subcrenata shell differs from that of its right shell. This phenomenon is closely related to antiwear capabilities. The objective of this study is to investigate the effects and mechanisms of surface topography on the antiwear properties of Scapharca subcrenata shells. Two models are constructed—a rib morphology model (RMM) and a coupled structure model (CSM)—to mimic the topographies of the right and left shells. The antiwear performance and mechanisms of the two models are studied using the fluid-solid interaction (FSI) method. The simulation results show that the antiwear capabilities of the CSM are superior to those of the RMM. The CSM is also more conducive to decreasing the impact velocity and energy of abrasive particles, reducing the probability of microcrack generation, extension, and desquamation. It can be deduced that in the real-world environment, Scapharca subcrenata’s left shell sustains more friction than its right shell. Thus, the coupled structure of the left shell is the result of extensive evolution

    Distance-dependent plasmon-enhanced fluorescence of upconversion nanoparticles using polyelectrolyte multilayers as tunable spacers

    Get PDF
    Lanthanide-doped upconversion nanoparticles (UCNPs) have attracted widespread interests in bioapplications due to their unique optical properties by converting near infrared excitation to visible emission. However, relatively low quantum yield prompts a need for developing methods for fluorescence enhancement. Plasmon nanostructures are known to efficiently enhance fluorescence of the surrounding fluorophores by acting as nanoantennae to focus electric field into nano-volume. Here, we reported a novel plasmon-enhanced fluorescence system in which the distance between UCNPs and nanoantennae (gold nanorods, AuNRs) was precisely tuned by using layer-by-layer assembled polyelectrolyte multilayers as spacers. By modulating the aspect ratio of AuNRs, localized surface plasmon resonance (LSPR) wavelength at 980 nm was obtained, matching the native excitation of UCNPs resulting in maximum enhancement of 22.6-fold with 8 nm spacer thickness. These findings provide a unique platform for exploring hybrid nanostructures composed of UCNPs and plasmonic nanostructures in bioimaging applications

    A single amino acid substitution in the R3 domain of GLABRA1 leads to inhibition of trichome formation in Arabidopsis without affecting its interaction with GLABRA3

    Full text link
    GLABRA1 (GL1) is an R2R3 MYB transcription factor that regulates trichome formation in Arabidopsis by interacting with the bHLH transcription factor GLABRA3 (GL3) or ENHANCER OF GL3 (EGL3). The conserved [D/E]L×2 [R/K]×3L×6L×3R amino acid signature in the R3 domain of MYB proteins has been shown to be required for the interaction of MYBs with R/B‐like bHLH transcription factors. By using genetic and molecular analyses, we show that the glabrous phenotype in the nph4‐1 mutant is caused by a single nucleotide mutation in the GL1 gene, generating a Ser to Phe substitution (S92F) in the conserved [D/E]L×2[R/K]×3L×6L×3R amino acid signature of GL1. Activation of the integrated GL2p:GUS reporter gene in protoplasts by cotransfection of GL1 and GL3 or EGL3 was abolished by this GL1‐S92F substitution. However, GL1‐S92F interacted successfully with GL3 or EGL3 in protoplast transfection assays. Unlike VPGL1GL3, the fusion protein VPGL1‐S92FGL3 failed to activate the integrated GL2p:GUS reporter gene in transfected protoplasts. These results suggested that the S92 in the conserved [D/E]L×2 [R/K]×3L×6L×3R amino acid signature of GL1 is not essential for the interaction of GL1 and GL3, but may play a role in the binding of GL1 to the promoters of its target genes.The R2R3 MYB transcription factor GL1 is a key regulator of trichome formation in Arabidopsis. The conserved [D/E]L×2[R/K]×3L×6L×3R amino acid signature in the R3 domain is required for the interaction of MYBs with R/B‐like bHLH transcription factors. S92F amino acid substantiation in the conserved [D/E]L×2[R/K]×3L×6L×3R signature in GL1 lead to loss‐of‐function mutation of GL1. However, our results indicate that Ser92 residue is not required for the interaction of GL1 with bHLH transcription factor GL3 or EGL3, but may required for binding of GL1 to its target genes.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/145310/1/pce12695_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/145310/2/pce12695.pd
    • …
    corecore