Direct Observation of Long Electron-Hole Diffusion Distance in CH3NH3PbI3 Perovskite Thin Film

In high performance perovskite based solar cells, CH3NH3PbI3 is the key material. We carried out a study on charge diffusion in spin-coated CH3NH3PbI3 perovskite thin film by transient fluorescent spectroscopy. A thickness-dependent fluorescent lifetime was found. By coating the film with an electron or hole transfer layer, [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) or 2,2,7,7-tetrakis(N,N-di-p-methoxyphenylamine)-9,9-spirobifluorene (Spiro-OMeTAD) respectively, we observed the charge transfer directly through the fluorescence quenching. One-dimensional diffusion model was applied to obtain long charge diffusion distances in thick films, which is ~1.7 um for electrons and up to ~6.3 um for holes. Short diffusion distance of few hundreds of nanosecond was also observed in thin films. This thickness dependent charge diffusion explained the formerly reported short charge diffusion distance (~100 nm) in films and resolved its confliction to thick working layer (300-500 nm) in real devices. This study presents direct support to the high performance perovskite solar cells and will benefit the devices design.Comment: 37 pages, 5 figures, 2 table

Search for K_S K_L in psi'' decays

K_S K_L from psi'' decays is searched for using the psi'' data collected by BESII at BEPC, the upper limit of the branching fraction is determined to be B(psi''--> K_S K_L) < 2.1\times 10^{-4} at 90% C. L. The measurement is compared with the prediction of the S- and D-wave mixing model of the charmonia, based on the measurements of the branching fractions of J/psi-->K_S K_L and psi'-->K_S K_L.Comment: 5 pages, 1 figur

Study of psi(2S) decays to X J/psi

Using J/psi -> mu^+ mu^- decays from a sample of approximately 4 million psi(2S) events collected with the BESI detector, the branching fractions of psi(2S) -> eta J/psi, pi^0 pi^0 J/psi, and anything J/psi normalized to that of psi(2S) -> pi^+ pi^- J/psi are measured. The results are B(psi(2S) -> eta J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 0.098 \pm 0.005 \pm 0.010, B(psi(2S) -> pi^0 pi^0 J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 0.570 \pm 0.009 \pm 0.026, and B(psi(2S) -> anything J/psi)/B(psi(2S) -> pi^+ pi^- J/psi) = 1.867 \pm 0.026 \pm 0.055.Comment: 13 pages, 8 figure

First Measurements of eta_c Decaying into K^+K^-2(pi^+pi^-) and 3(pi^+pi^-)

The decays of eta_c to K^+K^-2(pi^+pi^-) and 3(pi^+pi^-) are observed for the first time using a sample of 5.8X10^7 J/\psi events collected by the BESII detector. The product branching fractions are determined to be B(J/\psi-->gamma eta_c)*B(eta_c-->K^+K^-pi^+pi^-pi^+pi^-)=(1.21+-0.32+- 0.23)X10^{-4}$,B(J/\psi-->gamma eta_c)*B(eta_c-->K^{*0}\bar{K}^{*0}pi^+pi^-)= (1.29+-0.43+-0.32)X10^{-4}$, and (J/\psi-->gamma eta_c)* B(eta_c-->pi^+pi^-pi^+pi^-pi^+pi^-)= (2.59+-0.32+-0.48)X10^{-4}. The upper limit for eta_c-->phi pi^+pi^-pi^+pi^- is also obtained as B(J/\psi-->gamma eta_c)*B(eta_c--> phi pi^+pi^-pi^+pi^-)< 6.03 X10^{-5} at the 90% confidence level.Comment: 11 pages, 4 figure

The Technology of Mould Steel for Online Pre-hardening

AbstractThis article describes a production method of mould steel pre-hardening, and focus on the advantage of this method, The technical core of method is the variable frequency and variable amplitude pulse uniform high-precision temperature control, which achieved by using strong-medium-weak water cooling, gas-water cooling and gas mist cooling composite cooling control technology. Optimizing the cooling rate path is a good method of optimizing quenched organization and structure

Resonances in J/ψ→ϕπ+π−J/\psi \to \phi \pi ^+\pi ^- and ϕK+K−\phi K^+K^-

A partial wave analysis is presented of $J/\psi \to \phi \pi ^+\pi ^-$ and $\phi K^+K^-$ from a sample of 58M $J/\psi$ events in the BES II detector. The $f_0(980)$ is observed clearly in both sets of data, and parameters of the Flatt\' e formula are determined accurately: $M = 965 \pm 8$ (stat) $\pm 6$ (syst) MeV/c$^2$, $g_1 = 165 \pm 10 \pm 15$ MeV/c$^2$, $g_2/g_1 = 4.21 \pm 0.25 \pm 0.21$. The $\phi \pi \pi$ data also exhibit a strong $\pi \pi$ peak centred at $M = 1335$ MeV/c$^2$. It may be fitted with $f_2(1270)$ and a dominant $0^+$ signal made from $f_0(1370)$ interfering with a smaller $f_0(1500)$ component. There is evidence that the $f_0(1370)$ signal is resonant, from interference with $f_2(1270)$. There is also a state in $\pi \pi$ with $M = 1790 ^{+40}_{-30}$ MeV/c$^2$ and $\Gamma = 270 ^{+60}_{-30}$ MeV/c$^2$; spin 0 is preferred over spin 2. This state, $f_0(1790)$, is distinct from $f_0(1710)$. The $\phi K\bar K$ data contain a strong peak due to $f_2'(1525)$. A shoulder on its upper side may be fitted by interference between $f_0(1500)$ and $f_0(1710)$.Comment: 17 pages, 6 figures, 1 table. Submitted to Phys. Lett.

Measurement of the Branching Fraction of J/psi --> pi+ pi- pi0

Using 58 million J/psi and 14 million psi' decays obtained by the BESII experiment, the branching fraction of J/psi --> pi+ pi- pi0 is determined. The result is (2.10+/-0.12)X10^{-2}, which is significantly higher than previous measurements.Comment: 9 pages, 8 figures, RevTex

First observation of psi(2S)-->K_S K_L

The decay psi(2S)-->K_S K_L is observed for the first time using psi(2S) data collected with the Beijing Spectrometer (BESII) at the Beijing Electron Positron Collider (BEPC); the branching ratio is determined to be B(psi(2S)-->K_S K_L) = (5.24\pm 0.47 \pm 0.48)\times 10^{-5}. Compared with J/psi-->K_S K_L, the psi(2S) branching ratio is enhanced relative to the prediction of the perturbative QCD ``12%'' rule. The result, together with the branching ratios of psi(2S) decays to other pseudoscalar meson pairs (\pi^+\pi^- and K^+K^-), is used to investigate the relative phase between the three-gluon and the one-photon annihilation amplitudes of psi(2S) decays.Comment: 5 pages, 4 figures, 2 tables, submitted to Phys. Rev. Let

Identification of Candidate Genes for the Plateau Adaptation of a Tibetan Amphipod, Gammarus lacustris, Through Integration of Genome and Transcriptome Sequencing

The amphipod Gammarus lacustris has been distributing in the Tibetan region with well-known uplifts of the Tibetan plateau. It is hence considered as a good model for investigating stress adaptations of the plateau. Here, we sequenced the whole-genome and full-length transcriptome of G. lacustris, and compared the transcriptome results with its counterpart Gammarus pisinnus from a nearby plain. Our main goal was to provide a genomic resource for investigation of genetic mechanisms, by which G. lacustris adapted to living on the plateau. The final draft genome assembly of G. lacustris was 5.07 gigabases (Gb), and it contained 443,304 scaffolds (&gt;2 kb) with an N50 of 2,578 bp. A total of 8,858 unigenes were predicted in the full-length transcriptome of G. lacustris, with an average gene length of 1,811 bp. Compared with the G. pisinnus transcriptome, 2,672 differentially expressed genes (DEGs) were up-regulated and 2,881 DEGs were down-regulated in the G. lacustris transcriptome. Along with these critical DEGs, several enriched metabolic pathways, such as oxidative phosphorylation, ribosome, cell energy homeostasis, glycolysis and gluconeogenesis, were predicted to play essential roles in the plateau adaptation. In summary, the present study provides a genomic basis for understanding the plateau adaption of G. lacustris, which lays a fundamental basis for further biological and ecological studies on other resident aquatic species in the Tibetan plateau