81 research outputs found
Neptunium Reactivity During Co-Precipitation and Oxidation of Fe(II)/Fe(III) (Oxyhydr)oxides
Fe(II) bearing iron (oxyhydr)oxides were directly co-precipitated with Np(V)O2+ under anaerobic conditions to form Np doped magnetite and green rust. These environmentally relevant mineral phases were then characterised using geochemical and spectroscopic analyses. The Np doped mineral phases were then oxidised in air over 224 days with solution chemistry and end-point oxidation solid samples collected for further characterisation. Analysis using chemical extractions and X-ray absorption spectroscopy (XAS) techniques confirmed that Np(V) was initially reduced to Np(IV) during co-precipitation of both magnetite and green rust. Extended X-Ray Absorption Fine Structure (EXAFS) modelling suggested the Np(IV) formed a bidentate binuclear sorption complex to both minerals. Furthermore, following oxidation in air over several months, the sorbed Np(IV) was partially oxidised to Np(V), but very little remobilisation to solution occurred during oxidation. Here, linear combination fitting of the X-Ray Absorption Near Edge Structure (XANES) for the end-point oxidation samples for both mineral phases suggested approximately 50% oxidation to Np(V) had occurred over 7 months of oxidation in air. Both the reduction of Np(V) to Np(IV) and inner sphere sorption in association with iron (oxyhydr)oxides, and the strong retention of Np(IV) and Np(V) species with these phases under robust oxidation conditions, have important implications in understanding the mobility of neptunium in a range of engineered and natural environments
Neptunium Reactivity During Co-Precipitation and Oxidation of Fe(II)/Fe(III) (Oxyhydr)oxides
Fe(II) bearing iron (oxyhydr)oxides were directly co-precipitated with Np(V)O2+ under anaerobic conditions to form Np doped magnetite and green rust. These environmentally relevant mineral phases were then characterised using geochemical and spectroscopic analyses. The Np doped mineral phases were then oxidised in air over 224 days with solution chemistry and end-point oxidation solid samples collected for further characterisation. Analysis using chemical extractions and X-ray absorption spectroscopy (XAS) techniques confirmed that Np(V) was initially reduced to Np(IV) during co-precipitation of both magnetite and green rust. Extended X-Ray Absorption Fine Structure (EXAFS) modelling suggested the Np(IV) formed a bidentate binuclear sorption complex to both minerals. Furthermore, following oxidation in air over several months, the sorbed Np(IV) was partially oxidised to Np(V), but very little remobilisation to solution occurred during oxidation. Here, linear combination fitting of the X-Ray Absorption Near Edge Structure (XANES) for the end-point oxidation samples for both mineral phases suggested approximately 50% oxidation to Np(V) had occurred over 7 months of oxidation in air. Both the reduction of Np(V) to Np(IV) and inner sphere sorption in association with iron (oxyhydr)oxides, and the strong retention of Np(IV) and Np(V) species with these phases under robust oxidation conditions, have important implications in understanding the mobility of neptunium in a range of engineered and natural environments
Microbial Reduction of U(VI) under Alkaline Conditions: Implications for Radioactive Waste Geodisposal
Although there is consensus that microorganisms significantly influence uranium speciation and mobility in the subsurface under circumneutral conditions, microbiologically mediated U(VI) redox cycling under alkaline conditions relevant to the geological disposal of cementitious intermediate level radioactive waste, remains unexplored. Here, we describe microcosm experiments that investigate the biogeochemical fate of U(VI) at pH 10–10.5, using sediments from a legacy lime working site, stimulated with an added electron donor, and incubated in the presence and absence of added Fe(III) as ferrihydrite. In systems without added Fe(III), partial U(VI) reduction occurred, forming a U(IV)-bearing non-uraninite phase which underwent reoxidation in the presence of air (O2) and to some extent nitrate. By contrast, in the presence of added Fe(III), U(VI) was first removed from solution by sorption to the Fe(III) mineral, followed by bioreduction and (bio)magnetite formation coupled to formation of a complex U(IV)-bearing phase with uraninite present, which also underwent air (O2) and partial nitrate reoxidation. 16S rRNA gene pyrosequencing showed that Gram-positive bacteria affiliated with the Firmicutes and Bacteroidetes dominated in the post-reduction sediments. These data provide the first insights into uranium biogeochemistry at high pH and have significant implications for the long-term fate of uranium in geological disposal in both engineered barrier systems and the alkaline, chemically disturbed geosphere
Cesium and Strontium Contamination of Nuclear Plant Stainless Steel : Implications for Decommissioning and Waste Minimization
Stainless steels can become contaminated with radionuclides at nuclear sites. Their disposal as radioactive waste would be costly. If the nature of steel contamination could be understood, effective decontamination strategies could be designed and implemented during nuclear site decommissioning in an effort to release the steels from regulatory control. Here, batch uptake experiments have been used to understand Sr and Cs (fission product radionuclides) uptake onto AISI Type 304 stainless steel under conditions representative of spent nuclear fuel storage (alkaline ponds) and PUREX nuclear fuel reprocessing (HNO3). Solution (ICP-MS) and surface measurements (GD-OES depth profiling, TOF-SIMS, and XPS) and kinetic modeling of Sr and Cs removal from solution were used to characterize their uptake onto the steel and define the chemical composition and structure of the passive layer formed on the steel surfaces. Under passivating conditions (when the steel was exposed to solutions representative of alkaline ponds and 3 and 6 M HNO3), Sr and Cs were maintained at the steel surface by sorption/selective incorporation into the Cr-rich passive film. In 12 M HNO3, corrosion and severe intergranular attack led to Sr diffusion into the passive layer and steel bulk. In HNO3, Sr and Cs accumulation was also commensurate with corrosion product (Fe and Cr) readsorption, and in the 12 M HNO3 system, XPS documented the presence of Sr and Cs chromates.Peer reviewe
Mechanisms Governing 90Sr Removal and Remobilisation in a VLLW Surface Disposal Concept
Flow-through columns were used to assess potential long-term trends in 90Sr biogeochemistry and transport in a Finnish near-surface very low-level waste (VLLW) repository concept. Experiments simulated the effects of water intrusion and flow through the repository barrier and backfill materials, examining impacts on 90Sr migration. Artificial rainwater containing 2.0 mg/L stable Sr (as a proxy for 90Sr) was pumped through column systems that had varying compositions from a matrix of rock flour (backfill material), bentonite (backfill/sealing material), and carbon steel (waste encapsulation material), for 295 days. Effluent geochemistry was monitored throughout. Sr retention behaviour in all column systems was broadly similar. Sr removal from influent rainwater was marked (~95% removed) at the beginning of the experiments, and this degree of removal was maintained for 20 days. Thereafter, Sr concentrations in the effluents began to rise, reaching ~2 mg/L by 295 days. Further, 56%–67% of added Sr was retained in the repository materials over the 295-day reaction period. Analysis of the effluents indicated that colloids did not form; as such, Sr output was likely to be aqueous Sr2+. Upon completion of the experiment, solid-associated Sr distribution and speciation in the columns were assessed through column sectioning and post-mortem analyses, which encompassed the following: total acid digests, sequential extractions, and XAS analysis. The total acid digests and sequential extractions showed that Sr was evenly distributed throughout the columns and that the majority (68%–87%) of solid-associated Sr was in the exchangeable fraction (MgCl2). This suggested that a major part of the solid-phase Sr was weakly bound to the column materials via outer-sphere sorption. Interestingly, a smaller amount of Sr (7%–23%) could only be extracted by aqua regia, suggesting that a proportion of Sr may bind more strongly to the barrier materials. XAS analysis of select samples confirmed that the dominant Sr phase was sorbed to the rock flour and bentonite, but not corroded carbon steel. Columns were also subject to remobilisation experiments using artificial rain- and seawater without added Sr. While rainwater remobilised Sr slowly, high-ionic strength seawater remobilised Sr at much higher rates in the systems containing bentonite. Interestingly, Sr was well retained in the rock flour-only system following rain and seawater intrusion. Overall, the results indicate that the column materials provide reactive surfaces for Sr removal should it be released from waste packages; however, the backfill and barrier materials have limited retention capacity, and the dominant sorption interaction is relatively weak. The safety case for the shallow disposal of radioactive waste should consider the possibility of seawater intrusion and that the bentonite-bound Sr was significantly more susceptible to remobilisation following seawater, despite retaining slightly more Sr during sorption experiments
Redox interactions of Tc(VII), U(VI), and Np(V) with microbially reduced biotite and chlorite
Technetium, uranium, and neptunium are contaminants that cause concern at nuclear facilities due to their long half-life, environmental mobility, and radiotoxicity. Here we investigate the impact of microbial reduction of Fe(III) in biotite and chlorite and the role that this has in enhancing mineral reactivity toward soluble TcO4 -, UO2 2+, and NpO2 +. When reacted with unaltered biotite and chlorite, significant sorption of U(VI) occurred in low carbonate (0.2 mM) buffer, while U(VI), Tc(VII), and Np(V) showed low reactivity in high carbonate (30 mM) buffer. On reaction with the microbially reduced minerals, all radionuclides were removed from solution with U(VI) reactivity influenced by carbonate. Analysis by X-ray absorption spectroscopy (XAS) confirmed reductive precipitation to poorly soluble U(IV) in low carbonate conditions and both Tc(VII) and Np(V) in high carbonate buffer were also fully reduced to poorly soluble Tc(IV) and Np(IV) phases. U(VI) reduction was inhibited under high carbonate conditions. Furthermore, EXAFS analysis suggested that in the reaction products, Tc(IV) was associated with Fe, Np(IV) formed nanoparticulate NpO2, and U(IV) formed nanoparticulate UO2 in chlorite and was associated with silica in biotite. Overall, microbial reduction of the Fe(III) associated with biotite and chlorite primed the minerals for reductive scavenging of radionuclides: this has clear implications for the fate of radionuclides in the environment
Plutonium Migration during the Leaching of Cemented Radioactive Waste Sludges
One of the most challenging components of the UK nuclear legacy is Magnox sludge, arising from the corrosion of Mg alloy-clad irradiated metallic U fuel that has been stored in high pH ponds. The sludges mainly comprise Mg hydroxide and carbonate phases, contaminated with fission products and actinides, including Pu. Cementation and deep geological disposal is one option for the long-term management of this material, but there is a need to understand how Pu may be leached from the waste, if it is exposed to groundwater. Here, we show that cemented Mg(OH)2 powder prepared with Pu(IV)aq is altered on contact with water to produce a visibly altered ‘leached zone’, which penetrates several hundred microns into the sample. In turn, this zone shows slow leaching of Pu, with long-term leaching rates between 1.8–4.4 × 10−5% of total Pu per day. Synchrotron micro-focus X-ray fluorescence mapping identified decreased Pu concentration within the ‘leached zone’. A comparison of micro-focus X-ray absorption spectroscopy (µ-XAS) spectra collected across both leached and unleached samples showed little variation, and indicated that Pu was present in a similar oxidation state and coordination environment. Fitting of the XANES spectra between single oxidation state standards and EXAFS modeling showed that Pu was present as a mixture of Pu(IV) and Pu(V). The change in Pu oxidation from the stock solution suggests that partial Pu oxidation occurred during sample ageing. Similarity in the XAS spectra from all samples, with different local chemistries, indicated that the Pu oxidation state was not perturbed by macro-scale variations in cement chemistry, surface oxidation, sample aging, or the leaching treatment. These experiments have demonstrated the potential for leaching of Pu from cementitious waste forms, and its underlying significance requires further investigation
Plutonium Migration during the Leaching of Cemented Radioactive Waste Sludges
One of the most challenging components of the UK nuclear legacy is Magnox sludge, arising from the corrosion of Mg alloy-clad irradiated metallic U fuel that has been stored in high pH ponds. The sludges mainly comprise Mg hydroxide and carbonate phases, contaminated with fission products and actinides, including Pu. Cementation and deep geological disposal is one option for the long-term management of this material, but there is a need to understand how Pu may be leached from the waste, if it is exposed to groundwater. Here, we show that cemented Mg(OH)2 powder prepared with Pu(IV)aq is altered on contact with water to produce a visibly altered ‘leached zone’, which penetrates several hundred microns into the sample. In turn, this zone shows slow leaching of Pu, with long-term leaching rates between 1.8–4.4 × 10−5% of total Pu per day. Synchrotron micro-focus X-ray fluorescence mapping identified decreased Pu concentration within the ‘leached zone’. A comparison of micro-focus X-ray absorption spectroscopy (µ-XAS) spectra collected across both leached and unleached samples showed little variation, and indicated that Pu was present in a similar oxidation state and coordination environment. Fitting of the XANES spectra between single oxidation state standards and EXAFS modeling showed that Pu was present as a mixture of Pu(IV) and Pu(V). The change in Pu oxidation from the stock solution suggests that partial Pu oxidation occurred during sample ageing. Similarity in the XAS spectra from all samples, with different local chemistries, indicated that the Pu oxidation state was not perturbed by macro-scale variations in cement chemistry, surface oxidation, sample aging, or the leaching treatment. These experiments have demonstrated the potential for leaching of Pu from cementitious waste forms, and its underlying significance requires further investigation
Isotopic and Compositional Variations in Single Nuclear Fuel Pellet Particles Analyzed by Nanoscale Secondary Ion Mass Spectrometry
Article published under an ACS AuthorChoice LicenseThe Collaborative Materials Exercise (CMX) is organized by the Nuclear Forensics International Technical Working Group, with the aim of advancing the analytical capabilities of the participating organizations and providing feedback on the best approaches to a nuclear forensic investigation. Here, model nuclear fuel materials from the 5th CMX iteration were analyzed using a NanoSIMS 50L (CAMECA) in order to examine inhomogeneities in the U-235/U-238 ratio and trace element abundance within individual, micrometer scale particles. Two fuel pellets were manufactured for the exercise and labelled CMX-5A and CMX-5B. These pellets were created using different processing techniques, but both had a target enrichment value of U-235/U-238 = 0.01. Particles from these pellets were isolated for isotopic and trace element analysis. Fifteen CMX-5A particles and 20 CMX-5B particles were analyzed, with both sample types displaying inhomogeneities in the U isotopic composition at a sub-micrometer scale within individual particles. Typical particle diameters were similar to 1.5 to 41 mu m for CMX-5A and similar to 1 to 61 mu m for CMX-5B. The CMX-5A particles were shown to be more isotopically homogeneous, with a mean U-235/U-238 atom ratio of 0.0130 +/- 0.0066. The CMX-5B particles showed a predominantly depleted mean U-235/U-238 atom ratio of 0.0063 +/- 0.0094, which is significantly different to the target enrichment value of the pellet and highlights the potential variation of U-235/U-238 in U fuel pellets at the micrometer scale. This study details the successful application of the NanoSIMS 50L in a mock nuclear forensic investigation by optimizing high-resolution imaging for uranium isotopics.Peer reviewe
- …