The between-day reliability of peroneus longus EMG during walking

The peroneus longus (PL) is a rearfoot evertor, important in frontal plane foot motion. Studying PL function has been limited by previous electromyography (EMG) studies reporting poor between-day reliability. Due to its close proximity to adjacent muscles, EMG measures of PL may be susceptible to crosstalk, thus correct electrode placement is vital. The aim of this study was to use ultrasound to aid placement of small surface EMG electrodes and determine the between-day reliability of PL EMG in healthy participants' walking. Ten participants walked barefoot and shod at a controlled, self-selected speed. Six trials per condition, per session, were recorded over two days (mean (SD): 5 (3) days apart). The muscle belly was located using ultrasound. EMG was recorded with surface electrodes (Trigno Mini, Delsys, Inc.) at 2000 Hz. Amplitude was normalized to the peak per gait cycle and time normalized to the gait cycle. Reliability of discrete variables were primarily assessed with the standard error of measurement (SEM), plus the coefficient of multiple correlation (CMC), the coefficient of variation (CV) and the intra-class correlation coefficient (ICC). The pattern of the EMG profile was consistent. The SEM of peak amplitude was 4% (3-8%) and 3% (2-5%) for barefoot and shod respectively. For timing of the peak the SEM was 2% (1-3%) and 1% (1-2%) for barefoot and shod respectively. Low SEM of discrete variables suggests good reliability of PL EMG during walking supporting the future use of this protocol. Therefore activation of PL can be confidently studied in repeated-measures study designs

A systematic review of the effect of footwear, foot orthoses and taping on lower limb muscle activity during walking and running

Background: External devices are used to manage musculoskeletal pathologies by altering loading of the foot, which could result in altered muscle activity that could have therapeutic benefits. Objectives: To establish if evidence exists that footwear, foot orthoses and taping alter lower limb muscle activity during walking and running. Study design: Systematic literature review. Methods: CINAHL, MEDLINE, ScienceDirect, SPORTDiscus and Web of Science databases were searched. Quality assessment was performed using guidelines for assessing healthcare interventions and electromyography methodology. Results: Thirty-one studies were included: 22 related to footwear, eight foot orthoses and one taping. In walking, (1) rocker footwear apparently decreases tibialis anterior activity and increases triceps surae activity, (2) orthoses could decrease activity of tibialis posterior and increase activity of peroneus longus and (3) other footwear and taping effects are unclear. Conclusion: Modifications in shoe or orthosis design in the sagittal or frontal plane can alter activation in walking of muscles acting primarily in these planes. Adequately powered research with kinematic and kinetic data is needed to explain the presence/absence of changes in muscle activation with external devices. Clinical relevance: This review provides some evidence that foot orthoses can reduce tibialis posterior activity, potentially benefitting specific musculoskeletal pathologies

Tracking Data Relay Satellite System (TDRSS) VHF propagation study

A study performed to investigate the use of the Bent Ionospheric Model in computing corrections to the range and range rate measurements of the TDRSS satellites is documented. Several orbital configurations between the two satellites are discussed as to their effects on total electron content along the radio path between the satellites. Problem areas in the accurate computation of total electron content and range rate corrections are also discussed. The Bent Ionospheric Model gives the electron density versus height profile as a function of latitude, longitude, height, time, season, and solar flux

Location-specific cutaneous electrical stimulation of the footsole modulates corticospinal excitability to the plantarflexors and dorsiflexors during standing

Non-noxious electrical stimulation to distinct locations of the foot sole evokes location-specific cutaneous reflex responses in lower limb muscles. These reflexes occur at latencies that may enable them to be mediated via a transcortical pathway. Corticospinal excitability to the plantarflexors and dorsiflexors was measured in 16 participants using motor evoked potentials (MEPs). Spinal excitability was measured in eight of the original participants using cervicomedullary motor evoked potentials (CMEPs). Measurements were collected with and without preceding cutaneous stimulus to either the heel (HEEL) or metatarsal (MET) locations of the foot sole, and evoked potentials were elicited to coincide with the arrival of the cutaneous volley at either the motor cortex or spinal cord. Plantarflexor MEPs and CMEPs were facilitated with cutaneous stimulation to the HEEL for MEPs (soleus p = 0.04, medial gastrocnemius (MG) p = 0.017) and CMEPs (soleus p = 0.047 and MG p = 0.015), but they were unchanged following MET stimulation for MEPs or CMEPs. Dorsiflexor MEPs were unchanged with cutaneous stimulation at either location, but dorsiflexor CMEPs increased with cutaneous stimulation (p = 0.05). In general, the increase in CMEP amplitudes was larger than the increase in MEP amplitudes, indicating that an increase in spinal excitability likely explains most of the increase in corticospinal excitability. The larger change observed in the CMEP also indicates that excitability from supraspinal sources likely decreased, which could be due to a net change in the excitability of intracortical circuits. This study provides evidence that cutaneous reflexes from foot sole skin are likely influenced by a transcortical pathway

Copper malonamide complexes and their use in azide-alkyne cycloaddition reactions

A series of copper(i) malonamide complexes have been synthesised and their catalytic activity explored in 1,3-dipolar cycloaddition reactions: the first time this ligand motif has been reported in a catalytic transformation.</p

The immediate effects of foot orthosis geometry on lower limb muscle activity and foot biomechanics

This is the author accepted manuscript. The final version is available from Elsevier via the DOI in this recordFoot orthoses (FOs) are used to treat clinical conditions by altering the external forces applied to the foot and thereafter the forces of muscles and tendons. However, whether specific geometric design features of FOs affect muscle activation is unknown. The aim of this study was to investigate if medial heel wedging and increased medial arch height have different effects on the electromyography (EMG) amplitude of tibialis posterior, other muscles of the lower limb and the kinematics and kinetics at the rearfoot and ankle. Healthy participants (n = 19) walked in standardised shoes with i) a flat inlay; ii) a standard shape FOs, iii) standard FOs adjusted to incorporate a 6 mm increase in arch height, iv) and standard FOs adjusted to incorporate an 8° medial heel wedging and v) both the 6 mm increase in arch height and 8° increase in medial wedging. EMG was recorded from medial gastrocnemius, peroneus longus, tibialis anterior and in-dwelling tibialis posterior muscles. Motion and ground reaction force data were collected concurrently. Tibialis posterior EMG amplitude reduced in early stance with all FOs (ηp2 = 0.23-1.16). Tibialis posterior EMG amplitude and external ankle eversion moment significantly reduced with FOs incorporating medial wedging. The concurrent reduction in external eversion moment and peak TP EMG amplitude in early stance with medial heel wedging demonstrates the potential for this specific FOs geometric feature to alter TP activation. Medial wedged FOs could facilitate tendon healing in tibialis posterior tendon dysfunction by reducing force going through the TP muscle tendon unit

Effect of virtual reality training on laparoscopic surgery: randomised controlled trial

Objective To assess the effect of virtual reality training on an actual laparoscopic operation

Active flow control systems architectures for civil transport aircraft

Copyright @ 2010 American Institute of Aeronautics and AstronauticsThis paper considers the effect of choice of actuator technology and associated power systems architecture on the mass cost and power consumption of implementing active flow control systems on civil transport aircraft. The research method is based on the use of a mass model that includes a mass due to systems hardware and a mass due to the system energy usage. An Airbus A320 aircraft wing is used as a case-study application. The mass model parameters are based on first-principle physical analysis of electric and pneumatic power systems combined with empirical data on system hardware from existing equipment suppliers. Flow control methods include direct fluidic, electromechanical-fluidic, and electrofluidic actuator technologies. The mass cost of electrical power distribution is shown to be considerably less than that for pneumatic systems; however, this advantage is reduced by the requirement for relatively heavy electrical power management and conversion systems. A tradeoff exists between system power efficiency and the system hardware mass required to achieve this efficiency. For short-duration operation the flow control solution is driven toward lighter but less power-efficient systems, whereas for long-duration operation there is benefit in considering heavier but more efficient systems. It is estimated that a practical electromechanical-fluidic system for flow separation control may have a mass up to 40% of the slat mass for a leading-edge application and 5% of flap mass for a trailing-edge application.This work is funded by the Sixth European Union Framework Programme as part of the AVERT project (Contract No. AST5-CT-2006-030914

Different genetic strategies to generate high amylose starch mutants by engineering the starch biosynthetic pathways

This review systematically documents the major different strategies of generating high-amylose (HAS) starch mutants aiming at providing high resistant starch, by engineering the starch biosynthesis metabolic pathways. We identify three main strategies based on a new representation of the starch structure: 'the building block backbone model': i) suppression of starch synthases for reduction of amylopectin (AP) side-chains; ii) suppression of starch branching enzymes (SBEs) for production of AM-like materials; and iii) suppression of debranching enzymes to restrain the transformation from over-branched pre-AP to more ordered AP. From a biosynthetic perspective, AM generated through the second strategy can be classified into two types: i) normal AM synthesized mainly by regular expression of granule-bound starch synthases, and ii) modified linear AP chains (AM-like material) synthesized by starch synthases due to the suppression of starch branching enzymes. The application of new breeding technologies, especially CRISPR, in the breeding of HAS crops is also reviewed